• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.6
• /
• pp.698-705
• /
• 2008

When electromagnetic waves propagate through atmosphere, waves are affected by various factors. Atmosphere normally consists of different molecular species, water vapours, rain, fog, snow and small suspended particles called aerosols. The distributions of atmosphere molecules, water vapours, rain rate, snowfall and aerosol are dependent on geometrical regions or environment. In order to predict propagation characteristics in atmospheric environment, statistical analysis of the relevant parameters such as temperature, humidity, atmospheric pressure, wind speed, areosol and rainfall is crucial. In this paper, we performed a long-term statistical analysis for the atmospheric parameters in domestic environments and analyzed the propagation characteristics through atmosphere based on that.

• Korean Journal of Environmental Agriculture
• /
• v.15 no.4
• /
• pp.494-500
• /
• 1996

To investigate the relationship between the atmospheric pollution level and the pollution level of soil adjacent to the roadside in Suwon suspended particles and soil samples were collected in August to October 1993, and analyzed by AAS and ICP. The Ca, K, Mg concentration in atmosphere were observed as high level and assumed that it was effected by the acid-rain originated from the erosion of concreate vicinity to the roadside, and the Pb, Zn concentration were higher at outer area than that of central area. Hazardous heavy metal (Cu, Pb, Zn) concentrations in soil were observed as high level at all sampling sites. The relationship between the heavy metal concentrations in the atmosphere and those in the soil were analyzed, by using the correlation coefficient value(r) and the result was appeared similarly. And this study indicated that the atmospheric pollution affect the level of the soil pollution adjacent to the road side.

• ALGAE
• /
• v.27 no.2
• /
• pp.115-123
• /
• 2012

The establishment of algal spores plays an essential role in adult kelp distribution and abundance patterns. Sedimentation is a key variable regulating algal spore settlement and success, possibly controlling species-specific dominance $in$ $situ$. Laboratory experiments were used to determine spore attachment and survival rates of two Alaskan canopy-forming kelps, $Nereocystis$ $luetkeana$ (K. Mertens) Postels & Ruprecht and $Eualaria$ $fistulosa$ (Postels & Ruprecht) M. J. Wynne, to various types of sediment loading. Spore attachment for both species was significantly and similarly affected by three sediment treatments: suspended particles; settled sediment covering the substratum; and smothering of attached spores by settling sediment. Spore attachment decreased by approximately 90% at 420 mg sediment $L^{-1}$, the highest sediment load tested here, under all three treatments for both species. These results suggest that increases in sedimentation may constrain the success of the spore stages, but sediment does not seem to be a likely factor explaining species-specific distribution patterns. However, while sedimentation affected spores of both species similarly, timing of spore release in relation to times of maximum sediment load in the water might differ for different species, possibly explaining kelp species distribution patterns.

• Journal of Mechanical Science and Technology
• /
• v.16 no.10
• /
• pp.1336-1345
• /
• 2002

A triboelectrostatic separation system using a fluidized bed tribocharger for the removal of PVC material in the mixture of PVC/PS plastics is designed and evaluated as a function of electric field strength, air flow rate, and the mixing ratio of two-component mixed plastics. It consists of a fluidized-bed tribocharger, a separation chamber, a collection chamber and a controller. PVC and PS particles can be imparted negative and positive surface charges, respectively, due to the difference in the work function values of plastics suspended in the fluidized-bed tribocharger, and can be separated by passing them through an external electric field. Experimental results show that separation efficiency is strongly dependent on the electric Deld strength and particle mixing ratio. In the optimum conditions of 150 Ipm air flow rate and 2.6 kV/cm electric field strength a highly concentrated PVC (99.1%) can be recovered with a yield of more than 99.2% from the mixture of PVC and PS materials for a single stage of processing.

• Microbiology and Biotechnology Letters
• /
• v.24 no.6
• /
• pp.717-725
• /
• 1996

We have developed an efficient immobilized cell separator for continuous operation of immobilized fungal cell cultures, and applied this separator to actual fermentation process for the production of cyclosporin A (CyA), a powerful immunosuppressant. In the experiments employing highly viscous polymer (carboxymethyl cellulose) solution, the decantor showed good separating performances at high solution viscosites and fast dilution rates. Air duct and cylindrical separator installed inside the decantor turned out to play key roles for the efficient separation of the immobilized cells. By installing the decantor in an immobilized perfusion reactor system (IPRS), continuous immobilized culture was stably carried out even at high dilution rate for a long period, leading to high productivities of free cells and CyA. Almost no immobilized biomass existed in effuluent stream of the IPRS, demonstrating the effectiveness of the decan- tor system for a long-term continuous fermentation. It was noteworthy that we could obtain these results despite of the unfavorable fermentation conditions, i.e., reduced density of the biosupports caused by overgrowth of cells inside the bead particles and existence of high density of suspended fungal cells (10g/l) in the fermentation broth.

• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.2
• /
• pp.173-177
• /
• 2006

Pesticides from diffuse pollution sources adsorbed in suspended particles flow into surface water and threats to the public health. In this research, dechlorination constants of Atrazine by zero valent iron were measured with addition of buffer solution for simulating buffer capacity of sediment. When initial concentration of Atrazine was 10, 30, and 50 mg/L, their dechlorination was explained using the pseudo-first order reaction. Dechlorination constants $K_{obs}$ were $3.21{\times}10^{-2}/d$ in average.

• Journal of Korean Society for Atmospheric Environment
• /
• v.12 no.1
• /
• pp.79-90
• /
• 1996

Total suspended particles were measured at Kosan, Cheju Island, Korea during the period of March 11 .sim. April 19, 1994. Concentrations of non-sea salt(nss) ions were higher than those measured at clean marine areas in Japan and other background marine areas in the world. Especially, nss sulfate concentration is compatable to thoes measured at Seoul. It is suggested that most nss sulfate concentration is originated from anthropogenic sources. Nss sulfate concentration shows strong correlation with ammonium and nss potassium concentrations while shows no a pparent correlation with nitrate and nss calcium concentrations. Nss calcium concentrations shows strong correlation with nss potassium and mss magnesium concentrations. It is deduced that nss potassium has two origins, one anthropogenic, the other crustal. Backward trajectory analysis results show the trajectories of air parcel during the measurement period were mostly originated from China. It is shown that cases of high nss sulfate with high nss calcium can occur when an air parcel originated from arid and semi-arid regions of morthwestern China or Mongolia passes through northeastern China.

• Journal of the Korean Ceramic Society
• /
• v.45 no.2
• /
• pp.99-104
• /
• 2008

Zeta potential, sedimentation bulk density and rheology in the dispersion system have been studied in terms of solid loading (40-55 vol%), and types of additives. Ammonium polymethacrylate, glycerol, ethoxylated acetylenic diol, and polyvinyl alcohol have been used as the dispersant, cryo-protectant, surfactant, and binder, respectively. Sedimentation density greatly increased upon adding dispersant; the effect was more pronounced with ionic alumina suspension compared with covalent silicon carbide. With further addition of cryo-protectant and surfactant to dispersant, the sedimentation density increased somewhat. The suspension viscosity generally behaviored in an opposite manner to the sedimentation density, i.e., high sedimentation gave low high-shear viscosity, indicative of low order structure formation in the suspended particles. Shear rate rheology in shear rate of $2-300\;sec^{-1}$ showed a shear thinning and its onset began at similar shear rate (${\sim}100\;sce^{-1}$), regardless of solid loading.

• 한국전산유체공학회:학술대회논문집
• /
• 2008.03b
• /
• pp.538-541
• /
• 2008

The carbon laden suspensions in water with no surfactants have poor stability caused by the hydrophobic layer of particles. In this study, the water-based carbon nano colloide(CNC) was successfully produced using electro-chemical one-step method without agent. The properties of CNC were characterized by using various techniques such as particle size analyzer, TEM, FT-IR, turbidity meter, viscometer, and transient hot-wire method. The average size of the suspended in the CNC was 15 nm in diameter. The thermal conductivity of CNC compared with water was increased up to 14% with 4.2wt% concentration. The CNC was stable over 600hr. The enhanced colloidal stability of CNC may be caused by the chemical structures, such as, hydroxide and carboxyl groups formed in outer atomic layer of carbon, which (i) made the carbon nanofparticles hydrophilic and (ii) prevented the aggregation among nanoparticles.

• Ocean and Polar Research
• /
• v.28 no.3
• /
• pp.215-224
• /
• 2006

Spatial variation of heavy metal accumulation was investigated in Manila clam Ruditapes philippinarum collected from several tidal flats. Sediment metal levels varied highly among the sites, which was attributed primarily to differences in Fe and organic carbon contents and in part to gain size. Significant differences in metal concentrations also were found in the clam tissue among the different sampling sites. However, except for a few metals (Mn, Zn, Pb), which showed some elevation, the variations in the clam tissue were not related to the variations in the sediment. This is likely because most metals in filter-feeding herbivores such as R. philippinarum accumulated as a result of feeding on suspended particles such as phytoplankton and organic detritus in the water column, not in bottom sediment. In addition, tissue weight for a specific shell size varied significantly among the sites, and increased tissue mass indicating a good nutritive condition likely caused a subsequent dilution of body metals leading to reduced weight-specific concentrations of some metals (Cd, Zn, Cu, Co).