• Title/Summary/Keyword: surface stability

Search Result 3,589, Processing Time 0.027 seconds

SEISMIC STABILITY OF SATURATED REINFORCED SOIL WALLS

  • Kuwano, Jiro;Izawa, Jun
    • Proceedings of the Korean Geotechical Society Conference
    • /
    • 2010.09c
    • /
    • pp.66-71
    • /
    • 2010
  • This paper studies the effect of saturation of backfill on the seismic stability of reinforced soil walls (RSWs) using centrifuge shaking table tests. For comparison, degradation of static stability and seismic stability of a RSW under unsaturated condition was also investigated. Test results showed that the RSW under saturated condition had enough static stability. However, seismic stability of saturated RSW significantly decreased as compared with that under unsaturated condition. The saturated model RSW did not collapse, though it showed large deformation. It maintained sufficient stability after shakings although a clear slip surface appeared in the backfill. Finally, it is discussed how to evaluate residual stability of RSWs damaged by earthquakes with test results and the simple evaluation method proposed by authors.

  • PDF

An Improved Estimate of the Asymptotic Stability Region for the Uncertain Variable Structure Systems with Bounded Control (크기가 제한된 입력을 갖는 가변구조제어 시스템을 위한 개선된 안정 영역 추정값)

  • Choi Han Ho
    • Journal of Institute of Control, Robotics and Systems
    • /
    • v.11 no.6
    • /
    • pp.492-495
    • /
    • 2005
  • This paper deals with the problem of estimating the asymptotic stability region(ASR) of uncertain variable structure systems with bounded control. Using linear matrix inequalities(LMIs) we estimate the ASR and we show the exponential stability of the closed-loop control system in the estimated ASR. We show that our estimate is always better than the estimate of [3].

Stability Proof of NFL-FOO-based SMC : Part 5 (NFL-FOO에 기준한 SMC의 안정도 증명 : Part 5)

  • Lee, Sang-Seung;Park, Jong-Keun;Lee, Ju-Jang
    • Proceedings of the KIEE Conference
    • /
    • 1998.07c
    • /
    • pp.985-987
    • /
    • 1998
  • This paper presents a stability proof for the nonlinear feedback linearization-full order observer-based sliding mode controller (NFL-FOO-based SMC). The closed-loop stability is proved by a Lyapunov function candidate using an addition form of the sliding surface vector and the estimation error.

  • PDF

Stability Proof of NFL-ROO/SMC : Part 2 (NFL-ROO/SMC의 안정도 증명 : Part 2)

  • Lee, Sang-Seung;Park, Jong-Keun;Lee, Ju-Jang
    • Proceedings of the KIEE Conference
    • /
    • 1998.07c
    • /
    • pp.976-978
    • /
    • 1998
  • This paper presents the stability proof of a nonlinear feedback linearization-reduced order observer/sliding mode controller (NFL-ROO/SMC). The closed-loop stability is proved by a Lyapunov function candidate using an addition form of the sliding surface vector and the estimation error.

  • PDF

Stability Proof of NFL-O/SMMFC : Part 3 (NFL-O/SMMFC의 안정도 증명 : Part 3)

  • Lee, Sang-Seung;Park, Jong-Keun;Lee, Ju-Jang
    • Proceedings of the KIEE Conference
    • /
    • 1998.07c
    • /
    • pp.979-981
    • /
    • 1998
  • This paper presents a stability proof for the nonlinear feedback linearization-observer/sliding mode model following controller (NFL-O/SMMFC). The separation principle is derived, and the closed-loop stability is proved by a Lyapunov function candidate using an addition form of the sliding surface vector and the estimation error.

  • PDF

Stability Proof of NFL-ROO-based SMC : Part 6 (NFL-ROO에 기준한 SMC의 안정도 증명 : Part 6)

  • Lee, Sang-Seung;Park, Jong-Keun;Lee, Ju-Jang
    • Proceedings of the KIEE Conference
    • /
    • 1998.07c
    • /
    • pp.988-990
    • /
    • 1998
  • This paper presents the stability proof of a nonlinear feedback linearization-reduced order observer-based sliding mode controller (NFL-ROO-based SMC). The closed-loop stability is proved by a Lyapunov function candidate using an addition form of the sliding surface vector and the estimation error.

  • PDF

Stability Proof of NFL-O-based SMMFC : Part 7 (NFL-O에 기준한 SMMFC의 안정도 증명 : Part 7)

  • Lee, Sang-Seung;Park, Jong-Keun;Lee, Ju-Jang
    • Proceedings of the KIEE Conference
    • /
    • 1998.07c
    • /
    • pp.991-993
    • /
    • 1998
  • This paper presents a stability proof for the nonlinear feedback linearization-observer-based sliding mode model following controller (NFL-O-based SMMFC). The closed-loop stability is proved by a Lyapunov function candidate using an addition form of the sliding surface vector and the estimation error.

  • PDF

Effects of Temperature on the Activity of Pulmonary Surfactant of the Rabbit (온도(溫度)가 가토(家兎) 폐포표면(肺胞表面) 활성물질(活性物質)의 활성도(活性度)에 미치는 영향(影響))

  • Kwon, Koing-Bo
    • The Korean Journal of Physiology
    • /
    • v.7 no.2
    • /
    • pp.1-8
    • /
    • 1973
  • Though it has been reported by Clements et al. and Avery et al. that the activity of the pulmonary surfactant can be altered by the temperature changes, a conclusive evidence of the effects of temperature on the surfactant system of the lung is yet to come. In the present study, an attempt was made to observe possible effects of a few different degrees of temperature on the activity of the pulmonary surfactant of the rabbit in vivo and in vitro. The rabbit was sacrificed by blood shedding and both lungs were completely removed. The lung washings, obtained by gently lavaging the left lung with saline, was placed at 1) 4C for 1, 5, 10, 15, 30 and 40 days, and 2) 20C for 1, 2, 3, 4, 5 and 7 days for in vitro experiment. For in vivo experiment, the rabbit was placed at 4C for 4, 8, 12 and 24 hours, and the lung lavage was prepared as described above in the in vitro experiment. Tension-area (T-A) diagram of the lung lavage was recorded automatically by a modified. Langmuir-Wilhelmy balance with a synchronized recording system. The surface tensions thus obtained were compared with those of the normal rabbit, and the results are summarized as follows: 1. The maximal surface tension, minimal surface tension and stability index of the normal rabbit lung lavage were $52.5{\pm}2.3\;dynes/cm,\;4.9{\pm}2.3\;dynes/cm$ and 1.65, respectively. 2. In the group where the lung lavage was placed at 4C in vitro, the maximal and minimal surface tensions, and stability index did not show any noticeable changes comparing with the normal values up to 30 days. On the 40th day of the experiment, a tendency of a slight increase in the surface tensions was observed but the change was not significant. 3. When the lung lavage was placed at 20 C in vitro, the maximal surface tension did not show any appreciable change comparing with the normal except on the 7 th day with a slight increase. The minimal surface tension showed an increased value from the 2nd day, and on the 5 th and 7 th experimental day, markedly increased value was observed. The stability index, on the other hand. showed a marked decrease throughout the entire experiment with the value of 0.71 and 0.53 on the 5th and 7 th day, respectively. 4. In the group where the rabbit was placed at 4 C in vivo, the maximal surface tensions and stability index of the lung lavage showed little change from the normal. The minimal surface tension at 12 experimental hour showed a slight increase, but it returned to the normal value at 24 hour.

  • PDF

Strategies in Protein Immobilization on a Gold Surface

  • Park, Jeho;Kim, Moonil
    • Applied Science and Convergence Technology
    • /
    • v.24 no.1
    • /
    • pp.1-8
    • /
    • 2015
  • Protein immobilization on a gold surface plays an important role in the usefulness of biosensors that utilize gold-coated surfaces such as surface plasmon resonance (SPR), quartz crystal microbalance (QCM), etc. For developing high performance biosensors, it is necessarily required that immobilized proteins must remain biologically active. Loss of protein activity and maintenance of its stability on transducer surfaces is directly associated with the choice of immobilization methods, affecting protein-protein interactions. During the past decade, a variety of strategies have been extensively developed for the effective immobilization of proteins in terms of the orientation, density, and stability of immobilized proteins on analytical devices operating on different principles. In this review, recent advances and novel strategies in protein immobilization technologies developed for biosensors are briefly discussed, thereby providing an useful information for the selection of appropriate immobilization approach.

Interfacial and Thermal Characteristics of Natural Fiber Composites Reinforced with Henequen Surface-Treated with EBI

  • Pang Yansong;Han Seong Ok;Cho Donghwan;Drzal Lawrence T.
    • Proceedings of the Korean Society For Composite Materials Conference
    • /
    • 2004.10a
    • /
    • pp.88-91
    • /
    • 2004
  • In this study, a number of natural fiber henequen reinforced polymer matrix composites were successfully fabricated by means of a compression molding technique using chopped henequen fibers surface-treated with different electron beam irradiation (EBI) dosages, thermoplastic poly(butylene succinate), thermosetting unsaturated polyester and phenolic resins. Their interfacial and thermal characteristics were studied in terms of interfacial shear strength, fracture surface, dynamic mechanical properties, dimensional stability, and thermal stability using single fiber microbonding test, SEM, DMA, TMA, and TGA. The results show that their interfacial and thermal properties significantly depend on the intensity of EBl treatment on the natural fiber surface.

  • PDF