• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 추계 학술발표회
• /
• pp.904-909
• /
• 2008

Most of current slope safety analysis consider only the effect of the rise of underground water level. However, because the infiltration of surface water into the ground is believed to have signification effect on slope stability, the present study performed slope safety analysis in case of the rise of underground water level, infiltration of surface water, and both resulting from rainfall, and examined their effect.

• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2004년도 춘계학술발표회논문집
• /
• pp.203-208
• /
• 2004

Recently, digital image is increasing greatly practical use degree in several industry fields including construction. And interest about 3D digital image that can express practical object realistically is augmented greatly. In this study, developed 3D digital image generation system based on digital photogrammetry and created 3D digital image for object. And, wished to verify of 3D digital image through comparative analysis with processing result by digital photogrammetry system been using much the latest for acquisition of 3D information. Also, wished to apply to surface information acquisition about rock slope and execute investigation about discontinuity of joint etc. As the result, could created 3D digital image for object using the 3D digital image generation system developing in this study, and acquire surface information about rock slope efficiently.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1991년도 추계학술발표회 논문집 지반공학에서의 컴퓨터 활용 COMPUTER UTILIZATION IN GEOTECHNICAL ENGINEERING
• /
• pp.34-46
• /
• 1991

The slope stabi1ity analyses for Carsington dam were performed by using the computer program STABL and PC-SLOPE. The slip surface predicted by STABL can differ from the true slip surface. This is due to the characteristics of searching technique of the program STABL. Hence various possible potential slip surfaces must be examined using the program STABL. Various methods of analysis are employed in the program PC-SLOPE. A resonable factor of safety can be obtained by comparing the various values, and the potential slip surface can be predicted well relatively. The shear strength parameters of ctitical or residual state must be investigated as well as the peak strength for the case of the Carsington dam, where the deformation took place over long periods.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1999년도 봄 학술발표회 논문집
• /
• pp.277-284
• /
• 1999

This study describes the influence factors related to slope failure pattern and dimension in the southern Kyounggi area. Intrusive and metamorphic rocks are distributed in the study area. Geological condition, rainfall property and slope geometry are influence on slope failure characteristics in the study we& Geological factors related to slope failure are rock type, geological structure and weathering condition. Because of deep soil (RS-CW) depth of granite region, circular failure type is major failure pattern in granite region. Almost granite slopes with circular or surface failure pattern are failed during heavy rainfall season. But typical wedge failure type related to geological structure factor is a main failure pattern of metamorphic rock slope. Additionally failure dimension is influenced by geological factors and several factors, i.e. natural slope condition, failure type, rainfall intensity and etc. failure height/width ratio and thickness/length ratio of granite slope are 0.88 and 0.23. But the ratios of metamorphic rock slope are 1.36 and 0.19.

• Communications for Statistical Applications and Methods
• /
• 제11권1호
• /
• pp.121-137
• /
• 2004

Kim(2002) proposed a second type of central composite design (CCD2), in which the positions of the axial points are indicated by two numbers. In this paper, we study properties of CCD2 when we are interested in estimating the slope of a response surface. Conditions are obtained for CCD2 to be slope-rotatable over axial directions, and some CCD2's are presented that have slope rotatability over axial directions. Also values of a measure of slope rotatability over axial directions are tabulated for various CCD2's. Finally, it is shown that CCD2 is always slope-rotatable over all directions.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.735-738
• /
• 2005

The purpose of this study is the infiltration characteristics of soil cut-slope by rainfall. Stability analysis of soil cut-slopes has been conducted by limit equilibrium method on Seep/w and finite element method on Slope/w. Result is same as following. First. the hour when seepage line and groundwater in contact is proportionate from rainfall rate condition and upper natural slope gradient condition which is identical. Second, when seepage line and groundwater is contact, seepage line moves gradually at soil cut-slope surface. Finally, seepage line is formed similarly with soil cut-slope gradient. Third, when rainfall is ended, from the recording upper natural slope where the hour will pass it is stabilized

• 토지주택연구
• /
• 제9권2호
• /
• pp.51-57
• /
• 2018

The causes of landslides are dependant on rainfall events and the soil characteristics of a slope. For the conventional slope stability, the slope stability analysis has been carried out assuming the saturated soil theory. But, in order to clearly explain a proper soil slope condition by rainfall, the research should be performed using the unsaturated soil mechanism suitable for a soil slope in the field. In the study, by using two major categories of soils in Korea, such as granite and gneiss weathered soils, landslide model test and finite element method have been compared with the difference of seepage and soil stability analysis. The hydraulic conductivity of gneiss weathered soil is slower than that of granite weathered soil, and the gneiss weathered soil contains much finer soils than the granite weathered soil. It was confirmed that the instability of the slope was progressing slowly due to the slow rate of volumetric water content of the surface layer.

• 한국정밀공학회지
• /
• 제16권4호통권97호
• /
• pp.138-147
• /
• 1999

For autonomous navigation, a legged robot should be able to walk over irregular terrain and adapt itself to variation of supporting surface. Walking through slope is one of the typical tasks for such case. Robot needs not only to change foot trajectory but also to adjust its configuration to the slope angle for maintaining stability against gravity. This paper suggests such adaptation algorithm for stable walking which uses feedback of reaction forces at feet. Adjusting algorithm of foot trajectory was studied with the estimated angel of slope without visual feedback. A concept of virtual slope angle was introduced to adjust body configuration against slope change of the supporting terrain. Regeneration of foot trajectory also used this concept for maintaining its stable walking against unexpected landing point.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1996년도 가을 학술발표회 논문집
• /
• pp.209-218
• /
• 1996

• 대한토목학회논문집
• /
• 제33권3호
• /
• pp.1017-1025
• /
• 2013

본 연구에서는 강우 침투에 의한 사면의 모관흡수력 분포특성을 분석하기 위하여 수리학적-역학적 특성을 고려한 동시연계해석을 수행하였다. 이를 위해, 국내 3가지 지역에서 채취한 풍화토를 대상으로 함수특성곡선(SWCC)을 산정하였으며, 이를 토대로 지반조건, 강우특성, 사면경사에 따른 모관흡수력의 변화를 관측하였다. 그 결과, 강우강도가 증가함에 따라 사면내의 모관흡수력은 급격히 감소하는 경향이 나타났으며, 사면 경사에는 큰 영향을 받지 않는 것으로 나타났다. 또한 강우강도보다 포화투수계수가 작은 지반은 표층에서 포화가 쉽게 일어나는 것을 확인하였으며, 다층으로 존재하는 경우에도 사면표층 지반의 수리학적 특성이 모관흡수력 분포에 큰 영향을 주는 것으로 나타났다.