• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2004년도 Proceedings of ISRS 2004
• /
• pp.512-514
• /
• 2004

The Electro-Optical Camera (EOC) is a high spatial resolution, visible imaging sensor which collects visible image data of the earth's sunlit surface and is the primary payload on KOMPSAT-l. The purpose of the EOC payload is to provide high resolution visible imagery data to support cartography of the Korean Peninsula. The EOC is a push broom-scanned sensor which incorporates a single nadir looking telescope. At the nominal altitude of 685Km with the spacecraft in a nadir pointing attitude, the EOC collects data with a ground sample distance of approximately 6.6 meters and a swath width of around 17Km. The EOC is designed to operate with a duty cycle of up to 2 minutes (contiguous) per orbit over the mission lifetime of 3 years with the functions of programmable gain/offset. The EOC has no pointing mechanism of its own. EOC pointing is accomplished by right and left rolling of the spacecraft, as needed. Under nominal operating conditions, the spacecraft can be rolled to an angle in the range from +/- 15 to 30 degrees to support the collection of stereo data. In this paper, the status of EOC such as temperature, dark calibration, cover operation and thermal control is checked and analyzed by continuously monitored state of health (SOH) data and image data during the mission life of 3 years. The aliveness of EOC and operation continuation beyond mission life is confirmed by the results of the analysis.

• 한국자기학회지
• /
• 제4권2호
• /
• pp.142-149
• /
• 1994

두께가 0.30 mm, 0.27 mm인 3% 방향성 규소강판에서 표면 선긋기의 간격(39~1.22 mm)과 집합조직(texture) 방향에 대한 선긋기 각도의 변화($90^{\circ}~50^{\circ}$)에 따라 Barkhausen Noise를 측정하였다. 두께 0.27 mm의 시편에서 선긋기를 하지 않았을 때와 선긋기의 간격이 39 mm인 경우 에 대체로 Barkhausen noise envelope은 두개의 peak 현상을 보였으며, 그 현상은 $180^{\circ}$ 자구벽(domain wall)이 생성과 소멸과정을 거듭할 때 많은 activation energy가 필요함에 따른 것으로 설명할 수 있었다. 선긋기 횟수를 늘려감에 따라 즉 선긋기의 간격이 줄어듦에 따라 Barkhausen noise envelope의 크기값이 감소하였지만, 선간격 9.75 mm부터는 감소현상이 둔화되는 것으로 나타났다. 이는 선긋기 획수가 늘어남에 따라 선긋기 근처에서 $180^{\circ}$ 자구의 생성과 소멸이 쉽게 일어나기 때문에 Barkhausen Noise의 크기가 감소하는 것으로 설명할 수 있다. 이러한 현상은 0.30 mm의 시편에서도 유사하게 설명될 수 있었다. Barkhausen noise power는 선긋기 간격이 줄어듦에 따라 감소하였으며, 각도변화에 따른 결과는 $50^{\circ}$ 근처에서 가장 적은 값을 보였다.

• 대한기계학회논문집
• /
• 제14권6호
• /
• pp.1603-1612
• /
• 1990

본 연구에서는 5개의 원관으로 이루어진 일행관군에서의 원관 주위의 유동특 성의 해명과 유동장이 열전달에 미치는 영향등을 보다 상세히 밝히는데 목적이 있으며, 이를위해 원관의 표면압력, 관 주위의 유동장의 평균속도 및 난류강도, 관의 표면온도 등을 측정하였다.

• 대한통합의학회지
• /
• 제4권3호
• /
• pp.109-119
• /
• 2016

Purpose : The purpose of this research is to find clinical effects of functional resistance training using weighted vest on gross motor and balance abilities of children with dyskinetic cerebral palsy. Methods : This study selects 3 subjects for 8~12 years old who were diagnosed with children with dyskinetic cerebral palsy. The Design is ABA design of single-subject research design. Baseline(A) and TypeII Baseline(A : 12weeks) phases were received with NDT treatment, Intervention(B : 12weeks) phase provided with 40 minute functional resistance training using weighted vest in a session twice a week. In order to analyze the measure results of gross motor function and performance, balance abilities in children dyskinetic cerebral palsy during baseline, intervention and typeII baseline phase. Result : A statistically significant differences in the total GMFM including walking/running/jumping during baseline, intervention, typeII baseline, but no significant differences in the lying/rolling, sitting, crawling/kneeling and standing. A statistically significant differences in the total GMPM including dissociated movement, coordination, weight shift, stability during baseline, intervention, typeII baseline, but no significant differences in the body alignment domains. A statistically significant differences in the length and surface area ellipse of center of pressure during baseline, intervention, typeII baseline. Conclusion : The intervention method to facilitate multi-joint and closed kinematic chain movement equipped weighted vest applied functional resistance training on children with dyskinetic cerebral palsy effectively improve on gross motor function and performance, balance abilities.

• 한국정밀공학회지
• /
• 제28권3호
• /
• pp.285-291
• /
• 2011

The error motion of a machine tool spindle directly affects the surface errors of machined parts. The error motions of the spindle are not desired errors in the three linear direction motions and two rotating motions. Those are usually due to the imperfect of bearings, stiffness of spindle, assembly errors, external force or unbalance of rotors. The error motions of the spindle have been needed to be decreased to desired goal of spindle's performance. The level of error motion is needed to be estimated during the design and assembly process of the spindle. In this paper, the estimation method for the five degree of freedom (5 D.O.F) error motions of the spindle is suggested. To estimate the error motions of the spindle, waviness of shaft and bearings, external force model was used as input data. And, the estimation models are considering geometric relationship and force equilibrium of the five degree of the freedom. To calculate error motions of the spindle, not only imperfection of the shaft, bearings, such as rolling element bearing, hydrostatic bearing, and aerostatic bearing, but also driving elements such as worm, pulley, and direct driving motor systems, were considered.

• 한국도로학회논문집
• /
• 제16권6호
• /
• pp.39-50
• /
• 2014

PURPOSES : The objective of this study is to evaluate the curing and adhesive behavior of asphalt emulsions including polymer-modified emulsions for chip seals and fog seals. METHODS : For the laboratory testing, the evaporation test, the bitumen bond strength (BBS) test, and the Vialit test are used. Also, the rolling ball test and the damping test are employed to evaluate the curing properties of the fog seal emulsions. In order to conduct all the tests in controled condition, all test procedures are performed in the environmental chamber. The CRS-2L and the SBS CRS-2P emulsions are used as a polymer-modified emulsion, and then unmodified emulsion, the CRS-2, is compared for the evaluation of chip seal performance. For the fog seal performance evaluation, two types of polymer-modified emulsions (FPME-1 and FPME-2) and one of unmodified emulsion, the CSS-1H, are employed. All the tests are performed at different curing times and temperatures. RESULTS AND CONCLUSIONS : Overall, PMEs show better curing and adhesive behavior than non-PMEs regardless of treatments types. Especially, the curing and adhesive behavior of PMEs is much better than non-PMEs before 120 minutes of curing time. Since all the test results indicate that after 120 minutes of curing time the curing adhesive behavior of emulsions, the early curing time, i.e., 120 minutes, plays an important role in the performance of chip seals and fog seals.

• 한국해양학회지
• /
• 제30권1호
• /
• pp.1-12
• /
• 1995

한반도 남해 대륙붕의 표층퇴적물 216개에 대한 모드분석을 실시하였다. 수심 7 0~100 m에 분포하는 사니질 또는 니사질 혼합퇴적물은 복모드형(모래요소와 뺄요소) 을 나타낸다. 분리한 요소의 조직변수들은 현재 천해저 퇴적물에서 이미 인정된 입도 조직변수간의 상관관계와 잘 일치한다. 복모드형 가운데 모래요소의 특징은 다음과 같 다: (1) 모래요소의 평균입도, 분급도, 패각편 함량 분포는 등수심선과 유청사한 방향 으로 반복성을 보인다. (2) 모래요소는 다량의 패각편, 약간의 잔자갈과 산화된 석영 (iron-stained quartz)을 포함하는 중립 또는 세립다(Mz, 1-3$\psi$)로 구성되어 있다. (3) 석영 (quartz)입자의 표면에는 높은 에너지 환경에서 형성된 조가비 모양 (conchoidal breakage feature), "V"자형구조(V-shaped feature)가 잘 발달하고 있다. (4) CM-pattern에서 뺄요소는 uniform suspension 구간에 도시되었다. 이러한 특징들 은 섬진강으로부터 기원된 세립질 부유퇴적물이 대부분 단모드 뺄형분포해역에 퇴적되 었으며, 더욱 세립한 뺄요소가 외해로 이동되고, 해안전면퇴적물의 특징을 보이는 모 래 요소와 혼합된 것임을 지시한다. 해수면 상승으로 인한 퇴적환경 변화는 대륙붕퇴 적물에 많은 영향을 주었으며, 입도분포는 환경변화를 반응하고 있다, 복모드는 보이 는 대륙붕퇴적물의 퇴적환경 규명은 모드를 분리하고 각 모드의 환경을 추적하는 것이 타당하다는 결론을 얻었다.는 결론을 얻었다.

• 한국정밀공학회지
• /
• 제7권1호
• /
• pp.37-52
• /
• 1990

In this study, the characteristics of cooling and rolling during strip casting process is obtained in comparison with the experimental and analytical results. The prupose of this study is to effectively analyze the thermal and mechanical deformation of roller applying the results of the heat transfer and the pressure distribution to boundary conditions. And then the relation between strip thickness and roll deformation is shown. The second purpose is to obtain the proper condition of the continuous casting for stainless steel. The summary and conclusions can be made on the basis of the results obtained by the theories and experiments. a) The strip casting condition for the fine surface quality of tin-alloy as-cast material was obtained in accordance with the velocity of roll rotation and initial roll gap. b) The experimental condition that the dimension of the cast strip thickness coincide with that of the initial roll gap was according to the experimental result of continuous casting by twin-roll type. c) The thermoelastic finite element model to calculate the roll deformation is represented. Thermoelastic model prediction for the roll deformation are in good agreement with the experimental results considering the thermal expansion of the roll. d) The higher cooling rates were obtained by a twin-roller quenching technique. Also quenched microstructure of the rapidly solidified shell was verified. e) The magnitude of roll deformation due to the thermal expansion and roll separating force is quantit- atively represented in the analysis of continuous casting for stainless steel.

• 한국주조공학회지
• /
• 제18권4호
• /
• pp.340-348
• /
• 1998

C/V graphite iron has superior tensile strength, toughness and ductility than grey iron, and better castability than ductile iron. The retained austenite content of C/V graphite iron by austempering treatment affects on the mechanical properties such as ductility, hardness, wear properties and machinability. C/V graphite iron alloyed with Cu and Mo were carried out on the austenitizing at $900^{\circ}C$ for 1 hour, and the austempering at $240{\sim}400^{\circ}C$ for 1 hr. And then the mechanical and wear properties of austempered C/V graphite iron have been investigated by the retained austenite content. In consequence, the retained austenite content was found to be 18.2% in austempering temperature at $240^{\circ}C$, and was increased 39.2% at $400^{\circ}C$. Tensile strength and hardness of austempered C/V graphite iron were decreased as the retained austenite content increased, but elongation was increased. The rolling wear loss were increased as the retained austenite content increased. The wear surface of as-cast became to be rough. The microstructure of austempered C/V graphite iron was became to be acicular ausferrite in austempering at $240^{\circ}C$, and feathery ausferrite at $400^{\circ}C$.

• 한국항공우주학회지
• /
• 제30권7호
• /
• pp.105-112
• /
• 2002

높은 받음각 상태에 있는 연장된 앞전을 갖는 편요된 삼각날개 주위의 와류 유동 특성에 대하여 날개 윗면에서의 압력 측정을 통하여 연구하였다. 본 연구에서는 와류 유동의 물리적 현상, 특히 높은 받음각 상태에서 받음각과 옆미끄럼각이 날개 형상 주위의 공력 특성에 미치는 영향에 중점을 두었다. 실험 데이터로부터 LEX 와류가 날개와류에 유익한 효과를 부여함을 명확하게 알 수 있었다. 이는, 작은 옆미끄럼각 상태에서는 비교적 높은 받음각에 이르기까지 와류의 붕괴 없이 날개와류를 안정화시킴을 알 수 있다. 특정 범위의 받음각과 옆미끄럼각 상태에서는 롤링 모멘트가 역전되는 흥미로운 유동 현상을 관찰할 수 있었다.