• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2014.11a
• /
• pp.110-111
• /
• 2014

RGB laser 를 이용하여 rf-magnetron sputtering 법으로 합성한 a-IGZO 박막의 photoresponse 를 관찰하였다. Air 분위기에서 red 파장을 조사 할 경우 비교적 slow recovery 특성을 보였으며, green 과 blue 파장을 조사 할 경우 red 보다 fast recovery 특성을 나타내었다. 그러나 진공에서 측정할 경우, red 파장에서는 recovery 가 빨라졌으며, green 과 blue 파장의 경우 recovery 가 매우 느려짐을 확인하였다. 이는 passivation 을 하지 않은 소자의 oxygen gas 의 흡/탈착 때문으로 예상할 수 있었으며, red 파장이 gas 탈착에 기여하는 정도가 매우 작고, green 과 blue 파장이 gas 탈착에 기여하는 정도가 매우 크기 때문인 것으로 생각할 수 있었다. 온도를 증가시킬 경우, 모든 경우에서 recovery 가 빠르게 나타났는데 이는 흡/탈착에 필요한 barrier 및 $V_o{^{2+}}$에서 Vo 로 돌아오기 위한 barrier 를 쉽게 넘어갈 수 있기 때문으로 이해 할 수 있었다. 이러한 결과를 stretched exponential equation 을 이용하여 해석하였으며 수치화 하였다.

• Journal of Service Research and Studies
• /
• v.6 no.4
• /
• pp.1-13
• /
• 2016

Emotional labor may lead to service failure in service industries. Managers of an organization or a company can contribute to service recovery by reducing stress related to emotional labor. The aim of this study is to identify the antecedents and consequences of service recovery in respect of emotional labor. Data was surveyed from frontline employees to achieve the research purpose. The hypotheses were examined empirically using statistical tools. Results are as follows. First, surface acting had a negative impact on service recovery performance and deep acting had a positive impact. Second, empowerment and motivation had an influential relationship positively on service recovery performance. Third, service recovery performance was negatively related to intention to quit. In conclusion, managing employees' emotional labor strategies and work environment will bring high service recovery performance and low intention to quit.

• Korean Journal of Food Science and Technology
• /
• v.29 no.4
• /
• pp.752-757
• /
• 1997

Crude papain extracted at optimum condition was purified with an ethanol precipitation method. Four factors of protein recovery method were optimized by response surface methodology (RSM) and the function was expressed in terms of a quadratic polynomial equation. Adequacy of the model equation for optimum response values was tested and optimum conditions of protein recovery were 38.2 mg/mL of protein, ethanol concentration of 40% and precipitation temperature of $-8^{\circ}C$. The experimental value (68.97%) for recovery yield was closed to the predicted value (77.28%) under these conditions.

• Proceedings of the Korea Multimedia Society Conference
• /
• 1998.04a
• /
• pp.385-388
• /
• 1998

The main interest of previous researches for shape from shading was only on Lambertian surface which consists of diffuse reflectance surface. In practice, natural objects have hybrid reflectance, which limits the recovery of shape from intensity distribution[1][2]. In this paper, we propose the method of determining shape using neural network and diffuse illumination. The segmented region of sphere surface is used for training set, which can be determined by shadow line and edge of surface. Diffuse illumination is used to avoid specular spike and highlight which usually cause many problems such as intensity disparities. Diffuse illumination method using flat paper allows us to reduce these phenomena with simple scheme. Neural network and Diffuse illumination method are useful for shape from shading, because it can be applied to objects of unknown reflectance properties, but it is applied only to Torrance-Sparrow style reflectance.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.23 no.8
• /
• pp.1139-1148
• /
• 1999

This paper discussed the assessment of hand of denim fabrics finished by enzymatic hydrolysis. The semantic differential scale established using the database collected from university students. Analyzing the subjective rating by common factor analysis with oblimin rotation five factors expressing the hand were induced. Factor one was the surface property related to the surface roughness or softness Factor two was the durability which was related to the compactness and bearing strength Factor three was the sense of weight which was related to the thickness and weight. The moisture related properties and the sense of shape recovery were the forth and fifth factors respectively. the evaluations on the surface property weight and moisture related properties were similar by men and women However the shape recovery and the durability were evaluated differently. Surface and weight related properties were important factors judging the hand of fabrics by both group.

• Journal of the Korean institute of surface engineering
• /
• v.36 no.2
• /
• pp.184-193
• /
• 2003

Cyclic sweep voltametry was performed to investigate the electrochemical behavior of heavy metal ions and the organic additives in surface finishing process. And electrolysis using parallel plate electrode electrolyzer was carried out to simulate the treatment of real waste water. Results showed that more than 99 percent of Cu was recovered and selective recovery of Cu in mixed waste water was possible, but the possibility of economical recovery of Ni and Cr were very low due to the evolution of hydrogen gas. Electrochemical oxidation of cyanide and organic additives on anode showed very excellent removal rate. The complete removal of several hundred ppm of cynide was possible within several tens minutes and organics within 2 or 3 hours. Even in case of concentrate waste water, the complete removal of COD by using NaCl and air stirring seemed to be possible.

• Journal of the Korean institute of surface engineering
• /
• v.49 no.6
• /
• pp.477-485
• /
• 2016

As expensive and valuable metals being used in electronic and semiconducting industries are abandoned as industrial wastes after use of them, it is required to recover them from e-wasted electronics parts. Gold which is used for printed circuit boards or electronic equipments, accessories, etc., is one of e-Wasted materials and recently indium, gallium, zirconium, cobalt, molybdenum and lithium are bacome valuable metals to be recovered from the e-wastes. Since the amount of precious metals is now being faced with scarcity, lean too much on area and instability of supply, and industrial demands are rapidly increasing every year, it becomes more important to recover the valuable metals from the industrial wastes. In this review, we introduced technologies and research trend of the recovery processes of valuable metals from the e-wastes in high-tech devices over the world.

• Membrane Journal
• /
• v.32 no.6
• /
• pp.486-495
• /
• 2022

This study presents the improved recovery efficiency of rare metal ions through the modified separation membrane wettability and hydrogen ion permeation in the anion exchange membrane (AEM) under the recovery process of combined electrodialysis and solvent extraction. Specifically, the wettability of the separator was enhanced by hydrophilic modification on one separator surface through polydopamine (PDA) and lipophilic modification on the other surface through SiO₂ or graphene oxide (GO). In addition, the modified surface of AEM with polyethyleneimine (PEI), PDA, poly(vinylidene fluoride) (PVDF), etc. reduces the water uptake and modify the pore structure for proton ions generation. The suppressed transport resulted in the reduced hydrogen ion permeation. In the characterization, the surface morphology, chemical properties and composition of membrane or AEM were analyzed with Scanning Electron Microscopy (SEM) and Fourier Transform-Infrared Spectroscopy (FT-IR). Based on the analyses, improved extraction and stripping and hydrogen ion transport inhibition were demonstrated for the copper ion recovery system.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.04a
• /
• pp.1097-1100
• /
• 2001

In this paper, the electro-chemical-machining characteristics of Ni-Ti Shape Memory Alloy(SMA) was investigated. From the experimental results, the optimal electro chemical machining conditions for satisfying the machining quality(fine surface & high recovery stress) might be confirmed. And it was concluded that optical electro chemical condition for Ni-Ti SMA could be obtained at approximately 100% current efficiency and high frequency pulse current.

• Journal of the Korean institute of surface engineering
• /
• v.53 no.6
• /
• pp.360-368
• /
• 2020

Wear resistance of cutting tools is one of the most important requirements in terms of the durability of cutting tool itself as well as the machining accuracy of the workpiece. Generally, tungsten carbide ball end mills have been processed with hard coatings for high durability and wear resistance such as diamond coating and tetrahedral amorphous carbon(ta-C) coating. In this study, we developed multilayer ta-C coatings whose wear resistance is comparable to that of diamond coating. First, we prepared single layer ta-C coatings according to the substrate bias voltage and Ar gas flow, and the surface microstructure, raman characteristics, hardness and wear characteristics were evaluated. Then, considering the hardness and wear resistance of the single layer ta-C, we fabricated multilayer coatings consisting of hard and soft layers. As a result, it was confirmed that the wear resistance of the multilayer ta-C coating with hardness of 51 GPa, and elastic recovery rate of 85% improved to 97% compared to that of the diamond coated ball end mill.