• Proceedings of the KSME Conference
• /
• 2004.04a
• /
• pp.1424-1429
• /
• 2004

Distillation is one of many processes that can be used for the purification of water. It requires an energy input such as heat and solar radiation is a possible source of energy. In this process, water is evaporated, thus separating water vapor from the solute. The vapor is then condensed to pure water. The temperature of the water, the cavity of the enclosure and the surface of the glass was measured everyday. Fifteen points were chosen for the temperature measure using a thermocouple. The inner wall and the bottom of each still was painted black for good absorption of heat. The enforced glass was used for the cover for the entering of solar energy. The size of all of the water baths was the same, but the glass of the rectangular form had a tilted angle. In the case of fine or general weather, the volume of condensed water produced by $45^{\circ}$ and $60^{\circ}$ is very irregular compared to that of $15^{\circ}$ and $30^{\circ}$, In case of a rainy day, the occurrence of the volume of condensed water was similar to that of $15^{\circ}$ and $30^{\circ}$, but the volume of condensed water produced by $30^{\circ}$ was the highest.

• Proceedings of the SCSK Conference
• /
• 2003.09b
• /
• pp.218-218
• /
• 2003

Recently we showed the prototype portable device for the determination of human skin moisture by using near infrared spectroscopy. In order to optimize the acquiring condition of NIR spectrum of skin and control the target information of water depending the site such as epidermis and dermis, skin depth profiling was investigated changing the distance between illuminations and receiving of radiation in the terminal of fiber probe. The colleted light information could be controlled by changing the distance of the fiber optic probes. It was confirmed that the longer distance we used, the deeper site from the skin surface we could get information from in this study. Four kinds of probes with distances such as 0.03 mm, 0.1 mm, 0.5 mm, and 1.0 mm were used. In addition, the gap size from 0.3 mm to 3.0 mm was studied to control the intensity of water absorbance effectively and to avoid saturation of water absorption. We also investigated the reference materials depending the reflectance ratio for water absorption not to be saturated because of the strong absorptivity of water. Furthermore, spectroscopic information regarding free water and bound water around 1850 nm was investigated by using the different distance of fiber optic probes. This study would be great help to control the spectroscopic information of water to be measured depending the site where water exists.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.37 no.12
• /
• pp.1-8
• /
• 2000

The analysis of cavity-backed circular microstrip antenna is performed, based on the method of moments, and verified with experimental results. The proposed algorithm was used to analyze the return loss and radiation characteristics of antenna by the variation of each associated parameter. This result was used to provide the optimum design guideline. Finally active reflection coefficient of infinite cavity-backed microstrip away was calculated to show the effect of suppressing surface wave to eliminate scan blindness.

• Publications of The Korean Astronomical Society
• /
• v.30 no.2
• /
• pp.761-763
• /
• 2015

Colors have been derived from the observed optical spectrum of Mars and Jupiter. It is known that the planets and the Moon emit reflected sunlight and thus their spectra are similar to the spectrum of solar radiation. The question was then why is the color of Mars different from that of other planets, i.e. red, although it would share the same spectrum of reflected sunlight. Can one derive color from the spectrum? Therefore, we observed the optical spectra of the scattered sunlight in day time for the Moon and Mars using a 1-D array spectrograph on the 12-inch reflecting telescope in the Korea Science Academy of KAIST in Busan, Korea. We adopted the International Commission on Illumination (CIE) in 1931 of three spectral sensitivity peaks for the human eye in short, medium and long wavelengths in visible light. The observed spectra were imposed on CIE sensitivities and the color detected by the human eye was derived. The Mars spectrum represents red color and the Moon white. It is a similar color to that which a human would see. This result means that color is easily derived from astronomical spectra. The appearance of the planets surface can be determined for Mars, which is the result of iron oxide.

• Proceedings of the SCSK Conference
• /
• 1992.09a
• /
• pp.5-26
• /
• 1992

Many methods of in vitro SPF evaluation have been developed in order to measure SPF of sunscreen products. In this study, we compared two spectrophotometric in vitro measurements using the skin cast made of Luviset CAP- $X^{R}$ resin and Transpor $e^{R}$ tape as substrate with two in vivo measurements using guinea pig and human. And we also observed the radiation reaching on the earth's surface in Seoul for one year and the change of the primary skin irritancy along the change of SPF value. According to the our research, the first, in vivo measurement using guinea pig had the close agreement with SPF measurement using human and showed the tendancy that guinea pig SPF was lower than human SPF. The second, there was the good relationship between in vitro SPF by using Transpor $e^{R}$ tape and in vivo SPF, and it is possible to predict human SPF from Protection Index(PI) by using tape. The third, it is thought that SPE 20 is reasonable value because of UV intensity in Seoul and the primary skin irritancy of higher SPF than 25. So we propose that it is important to distinguish the sunscreen product having higher than approximate 25 from the category of general cosmetics including lower SPF sunscreen product.oduct.

• The Korean Journal of Ecology
• /
• v.11 no.1
• /
• pp.1-15
• /
• 1988

Studies on species compostion, promary production of benthic algal assemblage were carried out along a channel of the salt marsh near Inch'on, Kyonggi Bay, Korea. Possible biological, physical and KDICical factors controlling the aglal assemblage were also examined. The oveall diatoms were encountered one hundred and thirty-seven taxa, of which the dominant species were Paralia sulcata and Cymatosira belgica. These two species accounted for 32.6% relative abundance throughout the study period. Diatom taxa had no clear seasonal pattern in abundance analysis. But at the algal blooming period in spring, euglenoids occurred with a high abundance. The chlorophyll a content of benthic algae showed definite seasonal pattern. The algal biomass of the appeared to influence the spatial fluctuation in the algal biomass of the channel was regulated primarily by water content of sediment. Grazing by zoobenthos apperaed to influence the spatial fluctuation in the algal biomass of the sediment surface. The algal photosynthesis was measured in the laboratory with oxygen method. Photo-synthetic rate was independent of the temperature under the lower irradiance. The gross production from March to November was estimated to be 190g C/m2 at the channel slope. Photosynthetic efficiency was 0.37% on the basis of the photosyntherically active radiation for the study period.

• Korean Journal of Digital Imaging in Medicine
• /
• v.13 no.4
• /
• pp.145-151
• /
• 2011

The purpose of this study is to know some changes of resolution and image if we remove scattered ray using lead plate when doing lumbar lateral projection. Using 3 DR system(2 FD types, 1 CCD type) equipments and 2 film system equipments, we gain the image whether the phantom of abdomen equivalent sticking resolution chart has lead plate or not, whether we do collimation or not. Also, we use ion chamber, measure radiation exposure rate and change to entrance surface dose from it. we gain that images in the greatest condition of taking in clinic. 5 people in this group decoded resolution with our eyes, measured thickness of images and compared them from each equiments. Resolution has difference to size of collimation in DR FD type. Also there is no difference the original image with the new image which we abbreviated mAs. In DR CCD type, resolution didn't have difference whether lead plate is or not and whether we do collimation or not. In film type, existing or nonexisting of lead plate didn't influence on resolution. Lead plate makes the quality of image higher due to reducing scattered ray, it doesn't influence on resolution.

• Journal of Electrical Engineering and Technology
• /
• v.9 no.3
• /
• pp.984-990
• /
• 2014

Polymers are the most commonly used di-electrics because of their reliability, availability, ease of fabrication and cost. The commercial and industrial demand for advanced polymeric materials which are capable of being used in harsh environment is need of the hour. The study of the effect of electron beam irradiation on polymeric materials is an area of rapidly increasing interest. This paper discusses the resultant beneficial effects of electron beam irradiation on the SiR-EPDM blend having 50:50 composition. The changes in mechanical and electrical properties of SiR-EPDM blend which are exposed to three different doses of electron beam radiation namely 5 Mrad, 15 Mrad and 25 Mrad are presented. The irradiated blends are analyzed for their electro-mechanical and physico chemical properties. The electrical changes induced by irradiation are investigated by arc resistance, surface resistivity and volume resistivity measurements as per ASTM standards. The mechanical changes are observed by the measurement of tensile strength and elongation at break. Physico chemical investigation has been done using the FTIR, in order to investigate the irradiation induced chemical changes.

• Transactions on Electrical and Electronic Materials
• /
• v.14 no.2
• /
• pp.90-93
• /
• 2013

Al:ZnO thin films were deposited using the radio frequency magnetron sputtering technique at various temperatures and sputtering powers. With the increase in the deposition temperature and the decrease in the radio frequency sputtering power, the crystallinity was increased and the surface roughness was decreased, which lead to the decrease in the electrical resistivity of the film. It is also clearly observed that, the intensity of the (002) XRD peak increases with increasing the substrate temperature [1,2]. The electrical resistivity and optical transmittance of the Al:ZnO thin film were analyzed as a function of the post-annealing temperature. It can be seen that with the annealing temperature set at $400^{\circ}C$, the resistivity decreases to a minimum value of $4.1{\times}10^{-3}{\Omega}cm$ and the transmittance increases to a maximum value of 85% of the Al:ZnO thin film.

• Nuclear Engineering and Technology
• /
• v.50 no.3
• /
• pp.462-469
• /
• 2018

The background spectrum of a $3^{{\prime}{\prime}}{\times}3^{{\prime}{\prime}}$ NaI(Tl) well-type scintillation SILENA detector was measured without shielding, in 6 cm thick lead shielding, and with 2 mm thick electrolytic copper covering the detector inside the lead shielding. The relative remaining background of the lead shield lined with copper was found to be ideal for low-level environmental radioactive spectroscopy. The background total count rate in the (20-2160 KeV) was reduced 28.7 times by the lead and 29 times by the Cu + Pb shielding. The effective reduction of background (1.04) by the copper mainly appeared in the energy range from X-ray up to 500 KeV, while for the total energy range the ratio is 1.01 relative to the lead only. In addition, a strong relation between the full-energy peak absolute efficiency and the detector well height was found using gamma-ray isotropic radiation point sources placed inside the detector well. The full-energy peak efficiency at a midpoint of the well (at 2.5 cm) is three times greater than that on the detector surface. The energy calibrations and the resolution of any single energy line are independent of the locations of the gamma source inside or outside of the well.