• 제목/요약/키워드: surface ozone

검색결과 369건 처리시간 0.029초

오존처리가 몬모릴로나이트의 표면특성 및 몬모릴로나이트/폴리프로필렌 나노복합재료의 열안정성에 미치는 영향 (Influence of Ozone Treatment on the Surface Characteristics of Montmorillonite and the Thermal Stability of Montmorillonite/polypropylene Nanocomposites)

  • 진성열;이재락;박수진
    • Composites Research
    • /
    • 제18권1호
    • /
    • pp.23-29
    • /
    • 2005
  • 본 연구에서는 몬모릴로나이트(montmorillonite, MMT)의 오존처리가 몬모릴로나이트의 표면특성과 폴리프로필렌(polypropylene, PP) 나노복합재료의 열안정성에 미치는 영향에 대하여 살펴보았다. MMT의 표면 특성은 XRD, FT-IR 그리고 XPS를 통해 관찰하였고, 나노복합재료의 열안정성은 열중량 분석기(TGA)를 이용하여 조사하였다 실험 결과, 실리케이트의 층간 간격은 유기적으로 개질된 MMT(D-MMT)가 개질되지 않은 MMT에 비해 약 11${\AA}$ 증가한 것을 알 수 있었고, FT-IR 결과로부터 D-MMT의 경우 $2800\~2900\;cm^{-1}$ 부근에서 $CH_2$의 피크가 형성된 것을 확인할 수 있었다. 또한 오존처리는 MMT 표면에 Si-O와 $SiO_2$ 관능기를 증가시켰는데, 이는 산소를 포함하는 관능기들이 발달하기 때문으로 판단된다. 오존처리된 MMT가 도입된 나노복합재료에서 열안정성이 증가하는 것을 확인할 수 있었으며, 이는 PP와 MMT 사이의 산-염기 계면 상호작용으로부터 계면 결합력이 향상되었기 때문으로 판단된다.

오존발생시스템을 이용한 하천수질 개선기법 (Techniques of Water Quality Improvement by Using Ozone Generation System)

  • 김민영;류재욱;이승윤;지홍기
    • 한국수자원학회:학술대회논문집
    • /
    • 한국수자원학회 2008년도 학술발표회 논문집
    • /
    • pp.2122-2126
    • /
    • 2008
  • With the degradation of water quality and, at the same time increased water usage, the sources of high quality, for examples, river/stream, municipal reservoir, wells, artisan and surface water, are diminishing. Therefore, the importance of water quality has been emphasized over the years through publications and various literature sources. Even though considerable research has resulted in significant strides for providing interpretive information and mitigation strategies for improvement of waters, the quality of which is still questionable. This study aims to propose a completely independent self-contained system for purifying waters, solar-powered ozone generator. It is a semi-permanent and cost effective environmental solution. Functions of ozone treatment are: 1) to maintain oxidative flexibility, 2) remove harmful chemicals, wastes, and other substances, and 3) prevent epizootic microbial outbreaks. Recent advances in technology have allowed the development of the practical, self-contained and independent solar powered device. Solar electrical producing panels that charge batteries are the key to using these systems anywhere electrical power is not available. This paper invites the readers to examine the problem and consider the viable, proven solution the solar powered ozone purifying system. This paper also introduces basic concept and background of solar powered ozone generators and examine its feasibility for improving water quality in rivers and streams.

  • PDF

산화질소 첨가에 의한 오존 기반 탄소입자상물질 촉매연소반응 속도의 개선 (The addition of nitrogen oxides for improving the rate of catalytic ozone-induced oxidation of soot)

  • 이남훈;박태욱;이진수;이대원
    • 산업기술연구
    • /
    • 제39권1호
    • /
    • pp.1-5
    • /
    • 2019
  • In this study, we examined the effect of NO addition on the ozone-induced soot oxidation activity of $LaMnO_3$ perovskite catalysts. The addition of 10~20% NO ($NO_2$) with respect to the concentration of ozone effectively enhanced the rate of ozone-induced soot oxidation rate over $LaMnO_3$. However, the excessive addition of NO ($NO_2$) was detrimental to ozone-induced soot oxidation activity. It is supposed nitrogen oxides would adsorb on the catalyst and then react with carbon-oxygen species developed on soot surface, but an excessive addition of nitrogen oxide would inhibit the formation of carbon-oxygen species, which is a key intermediate in the reaction, and consequently suppress the oxidation rate of soot.

오존처리에 의한 카본 블랙의 산화와 표면 작용기 분석 (Oxidation and Surface Functional Group Analyses under Ozone Treatment of Carbon Black)

  • 양세인;김기여;류해윤;조상제;윤광의
    • Elastomers and Composites
    • /
    • 제40권3호
    • /
    • pp.188-195
    • /
    • 2005
  • 본 연구에서는 카본 블랙을 오존 처리 후, 표면의 물리 화학적 변화와 표면 작용기 변화를 조사하였다. 표면의 물리 화학적 변화는 원소 분석, PH, tint strength, DBP, $N_2SA$, IA를 통하여 분석하였고, 표면 작용기의 변화는 금속 수산화물과 표면의 산, 염기 반응을 통하여 조사하였다. 산화 전 후 입자의 구조, 크기, 표면적의 변화는 거의 없었으나, 오존 처리 시간이 길어짐에 따라 산소의 함량이 증가하고 그에 따라 pH는 감소하다가 정체되는 양상을 보였다. 금속 수산화물 $NaHCO_3,\;Na_2CO_3,\;NaOH,\;NaOC_2H_5$을 사용하여 표면의 카르복실기, 락톤기, 하이드록실기, 카르보닐기를 각각 정량하였다. 산화 전에는 소량의 카르보닐기만이 표면에 존재하는 것으로 측정되었으나, 오존처리 시간이 길어짐에 따라 카르복실기와 카르보닐기의 양이 서서히 증가하다가 포화 상태에 이르렀다. 락톤기와 하이드록실기는 산화 전 후 거의 표면에 존재하지 않는 것으로 나타났다. 이러한 실험 결과는 기존의 에틸렌과 오존 반응 메커니즘에 의해 알려진 실험 결과들과 유사하다. 오존 산화 후에 카본 블랙은 AIBN을 처리하면 무게가 증가하였으며 ESR 분석을 통한 자유 라디칼은 약간 감소하였다. 머캅토 작용기를 가진 유기 화합물과 반응시킨 카본블랙은 자유 라디칼의 피크가 거의 다 감소하였다.

오존 처리에 의해 산소 작용기가 도입된 활성탄소의 세슘 흡착 특성 (Cesium Adsorption Properties of Activated Carbon with Oxygen Functional Groups Introduced by Ozonation Treatment)

  • 채은선;민충기;임채훈;이영석
    • 공업화학
    • /
    • 제35권1호
    • /
    • pp.23-28
    • /
    • 2024
  • 세슘은 높은 수용성으로 인하여 인체에 쉽게 침투하여 암 또는 DNA의 변형을 유발하는 잠재적인 독성 오염물질이다. 본 연구에서는 활성탄소의 세슘 흡착 능력을 향상시키고자 오존 처리를 통하여 활성탄소 표면에 산소 작용기를 도입하였다. 오존 처리 시간의 증가에 따라 활성탄소 표면의 산소함량이 증가하였다. 이후 활성탄소와 세슘 사이의 정전기적 상호작용이 더욱 원활하게 이루어져 모든 시료의 세슘 이온 흡착 효율이 향상되었다. 특히 반응기 내부 오존 농도를 50000 ppm으로 하여 7 min 동안 오존 처리한 시료는 약 12%의 높은 산소 작용기 함량을 보이며 97.6%의 가장 높은 세슘 제거 효율을 보였다. 한편, 5 min 동안 처리된 시료는 7 min간 반응한 시료와 비교하여 0.3%의 근소한 세슘 제거율 차이를 보였으며, 이는 오존 기체의 반응 특성으로 인한 두 시료의 표면화학적 유사성에 기인한다. 그러나, 오존 처리된 활성탄소의 세슘 흡착 성능은 활성탄소의 비표면적 및 기공 구조도 중요하지만 표면에 도입된 산소 작용기 양이 주된 영향을 미치는 것으로 판단된다.

ITO 전극의 오존 표면처리에 의한 플렉시블 PCDTBT : PC71BM 유기박막 태양전지의 성능 개선에 관한 연구 (A Study on the Performance Improvement for Flexible PCDTBT : PC71BM Organic Thin Film Solar Cell by Ozone Surface Treatment of ITO Electrode)

  • 노임준;임영택;신백균
    • 조명전기설비학회논문지
    • /
    • 제26권11호
    • /
    • pp.104-108
    • /
    • 2012
  • Flexible organic thin film solar cell device with Bulk Hetero-Junction (BHJ) structure was fabricated with blended conjugated polymer of PCDTBT : $PC_{71}BM$ as active layer. Surface of ITO anode for the organic solar cell device was treated with ozone. The organic solar cell device with bare ITO showed short circuit current density ($J_{sc}$) of $8.2mA/cm^2$, open-circuit voltage ($V_{oc}$) of 0.73V, fill factor (FF) of 0.36, and power conversion efficiency (PCE) of 2.16%, respectively. The organic solar cell device with ozone treated ITO anode revealed distinctively improved performance parameters:$J_{sc}$ of $9.8mA/cm^2$, $V_{oc}$ of 0.82V, FF of 0.43, PCE(${\eta}$) of 3.42%.

울산시 상수원수에서의 오존분해 특성 및 의약물질 분해 거동 연구 (Characteristic behaviors of ozone decomposition and oxidation of pharmaceuticals during ozonation of surface waters in Ulsan)

  • 이혜진;이홍신;이창하
    • 상하수도학회지
    • /
    • 제27권1호
    • /
    • pp.39-47
    • /
    • 2013
  • This study demonstrates the oxidative degradation of pharmaceutical compounds during ozonation of surface waters in Ulsan. Diclofenac, carbamazepine, bezafibrate, and ibuprofen were selected as surrogate pharmaceutical compounds, and ozonation experiments were performed using raw waters collected from the Sayeon Dam and the Hoeya Dam in Ulsan. Diclofenac and carbamazepine which have high reactivity with molecular ozone showed higher removal efficiencies than bezafibrate and ibuprofen during ozonation. The addition of tert-butanol, a hydroxyl radical scavenger, increased the removal efficiencies of diclofenac and carbamazepine by increasing the ozone exposure. However, the oxidation of bezafibrate and ibuprofen was inhibited by the presence of tert-butanol due to the suppression of the exposure to hydroxyl radical. The elimination of the selected pharmaceuticals could be successfully predicted by the kinetic model base on the $R_{ct}$ concept. Depending on the experimental condition, $R_{ct}$ values were determined to be $(1.54{\sim}3.32){\times}10^{-7}$ and $(1.19{\sim}3.04){\times}10^{-7}$ for the Sayeon Dam and the Hoeya Dam waters, respectively. Relatively high $R_{ct}$ values indicate that the conversion of $O_3$ into $^{\cdot}OH$ is more pronounced for surface waters in Ulsan compared to other water sources.

잉크젯 기술자 표면처리 기술을 이용한 나노 실버 잉크 프린팅 (Printing of Nano-silver Inks with Ink-jet Technology and Surface Treatment)

  • 신권용;이상호;김명기;강희석;황준영;박문수;강경태
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2007년도 Techno-Fair 및 추계학술대회 논문집 전기물성,응용부문
    • /
    • pp.104-105
    • /
    • 2007
  • In this study, characteristics of silver ink-jet printing were investigated under various substrate treatments such as substrate heating, hydrophobic coating, and ultraviolet(UV)/ozone soaking. Fluorocarbon(FC) film was spin-coated on the polyimide (PI) film substrate to obtain a hydrophobic surface. Although hydrophobicity of the FC film could reduce the diameter of the printed droplets, the singlet images printed on the FC film surface showed irregularities in the pattern size and the position of the printed droplet along with droplet merging phenomenon. The proposed UV/ozone soaking of the FC film improved the uniformity of the pattern size and the droplet position after printing and substrate heating was very effective way in preventing droplet merging. By heating of the substrate after UV/ozone soaking of the coated FC film, silver conductive lines of 78-116 ${\mu}m$ line were successfully printed at low substrate temperatures of $40^{\circ}C$.

  • PDF

Effects of ozone, ultraviolet and an organic acid-based disinfectant against porcine reproductive and respiratory syndrome virus

  • Yoon, Yong-Dae;Kim, Won-Il
    • 한국동물위생학회지
    • /
    • 제36권3호
    • /
    • pp.157-162
    • /
    • 2013
  • A good level of biosecurity practice is important for efficient porcine reproductive and respiratory syndrome (PRRS) control. In the current study, disinfecting ability of ozone against PRRS virus (PRRSV) was evaluated in comparison with ultraviolet (UV) and an organic acid-based disinfectant to assess the possible use of ozone for disinfecting farm vehicles, equipments, and materials to reduce the risk of new virus introduction. For in vitro evaluation, the levels of infectious virus and viral RNA were determined on the swabs collected from the floor surface of each room treated with either ozone, UV or the disinfectant up to 30 min after contamination with 100 mL of VR2332 ($10^5\;TCID_{50}/mL$). For in vivo evaluation, 3, 4-week old, PRRS-free pigs were housed into those rooms right after the last swab collection. Then the pigs in each room were injected intramuscularly with the corresponding swab samples collected at the last time point and pooled per each room. Although ozone, UV, and the disinfectant significantly reduced the levels of PRRSV RNA contamination, ozone was most effective in removing the viral RNA. In addition, the virus collected after at least 10 min exposure to ozone failed to replicate in pigs while the virus collected after treatment with UV and the disinfectant for 30 min still replicated in pigs. Based on the results, it was concluded that ozone is more effective in inactivating PRRSV as compared with UV and the organic acid-based disinfectant.

유전체 볼 충진 배리어 방전을 이용한 오존 생성 및 TCE 분해처리에 관한 연구 (Study on the Ozone Generation and Decomposition of Trichloroethylene Using Dielectric Ball Materials filled Barrier Discharge)

  • 한상보
    • 전기전자학회논문지
    • /
    • 제23권2호
    • /
    • pp.431-437
    • /
    • 2019
  • 논문은 유전체 볼 충진 배리어 방전 리액터를 이용하여 오존 생성 및 TCE 분해 특성에 대하여 논하였다. 오존 발생량은 $Al_2O_3$ 또는 $TiO_2$ 유전체 볼을 충진한 경우가 유전체 볼을 충진하지 않은 배리어 방전리액터에 비하여 크게 증가됨을 보였으며, 이러한 방전구조는 오존 생성량을 증가시키기에 적절한 것으로 판단되었다. 또한, TCE 분해효율과 COx 전환율은 $MnO_2$ 충진 방전리액터를 사용한 경우가 높았으며, 이것은 방전공간에 위치한 촉매 표면에서 오존 분해에 따른 화학반응에 기인된 것으로 파악되었다. 촉매 표면 화학반응을 파악하기 위하여 Al2O3 유전체 볼 충진 방전리액터와 촉매 리액터를 직렬로 배치하여 TCE 분해 효율이 100[%]에 도달하였음을 확인하였으며, $MnO_2$ 촉매는 오존 분해에 매우 좋은 재료이며, 이러한 오존 분해 촉매 반응을 이용하여 TCE와 같은 VOCs 분해에 유용하게 활용될 것으로 사료된다.