• 한국화재소방학회:학술대회논문집
• /
• 한국화재소방학회 2008년도 춘계학술논문발표회 논문집
• /
• pp.333-336
• /
• 2008

This study is the result between the variation of fuel moisture and the risk of forest fire through measuring the change of moisture containing ratio on-site and its average analysis for each diameter of surface dead fuels in the forest. The measurement was performed on six days from the day after a rainfall. The fuel moisture on-site was measured on the day when the accumulated rainfall was above 5.0mm, and the measurements was 2 times in spring. From the pine forest which were distributed around Samcheok and Donghae in Kangwondo, three regions were selected by loose, medium, and dense forest density, and the fuel moisture was measured on the ranges which are less than 0.6cm, 0.6-3.0cm, 3.0-6.0cm, and more than 6.0cm in the forest for six days from the day after a rainfall. The study showed that the moisture containing ratio converged on 3 - 4 days for surface deads fuels which diameter are less than 3.0cm and the convergence was made more than six days for ones which diameters are more than 3.0cm except the surface dead fuel of 3.0-6.0cm diameter of loose forest density.

• Journal of electromagnetic engineering and science
• /
• 제10권4호
• /
• pp.212-218
• /
• 2010

The radar backscatter from various earth surfaces is sensitive to the frequency of the incident wave. This study examined the radar sensitivities for surface parameters such as soil moisture content and surface roughness of both bare and vegetated surfaces at X-band. Because L-band frequencies are often used for sensing the surface parameters, the sensitivities of X-band are also compared with those of the L-band. The sensitivities of the X-band radar backscatter were examined with respect to soil moisture content and surface roughness of rough bare soil surfaces. These sensitivities were also examined using the same parameters for vegetated surfaces for various vegetation densities and incidence angles. Use of the X-band radar for soil moisture detection was as effective as L-band radar for bare soil surfaces. For vegetated surfaces, the soil moisture could be detected using an X-band radar at lower incidence angles, where the upper limit of the incidence angles was dependent on vegetation density.

• 한국식품영양학회지
• /
• 제6권3호
• /
• pp.178-188
• /
• 1993

This research was attempted to investigate changes in physicochemical properties of rice extrudate with added ginger powder extruded by single screw extruder. Graphic three dimensional analysis on response surface regression was used to evaluate effects of extrusion variables on quality factors of the extrudate according to two independent variables, ginger consent 0∼12%, moisture content 14∼26%. The summarized results are as follows : 1) Regarding proximate composition of rice extrudate with added ginger powder, as ginger powder content of raw material Increased, crude tat, crude protein, crude ash and crude fiber increased, while soluble nitrogen free extract decreased. 2) Graphic three dimensional analysis on response surface regression was conducted for each dependent variable which revealed statistically significant relationship with independent variables, 0∼120A ginger and 14∼26% moisture content. Expansion ratio had a critical point as moisture content changed. As ginger and moisture content Increased, bulk density, break strength and water absorption Index Increased, while water solubility Index decreased. The predicted maximum degree of gelatinization in 6.15% ginger and 15.56% moisture content is 88.27%, and lightness decreased as ginger content Increased. According to the microstructure for the cross section of extrudate obsorbed with image analyzer, air cell number and perimeter revealed saddle point, meanwhile total area and fractarea of air cell had critical points as moisture content changed. In view of the results, quality of rice extrudate with added ginger powder was optimum when rice flour was fed to the extruder with 2∼7% singer powder and 15∼20% moisture content.

• 대한토목학회논문집
• /
• 제14권3호
• /
• pp.535-542
• /
• 1994

원격 측정 방법은 지표로부터 방출된 방사선의 관측으로부터 지표면의 특성을 추정하는데 기초를 두고 있으며 이 방법을 사용하여 연구되어지는 수문학적 인자에는 지표면 온도, 증발산, 토양 함수비, 강우 그리고 강설 등이 있다. 본 연구에서는 관측된 광명온도와 모의된 광명온도로부터 피복이 안된 토양의 함수비 산정에 대한 방법을 소개한다. 피복이 안된 토양에서의 초단파 방출은 함수비, 토양의 온도와 표면 조도에 의존하게 된다. 이 방법은 표면 조도의 영향을 고려하기 위한 Fresnel 반사 계수의 수정과 함께 방사선 전달 모델(radiative transfer model)에 기본을 두고 있는데 피복이 안된 매끈한 표면과 서로 다른 표면 조도를 가진 표면에 대해 분석을 실시한다. 연구의 결과는 표면 조도의 영향이 토양의 광명온도를 증가시키고 광명온도와 함수비 사이의 감소경사를 작게함을 보여주고 있다.

• Journal of the Korean Wood Science and Technology
• /
• 제24권1호
• /
• pp.75-80
• /
• 1996

The purpose of this study is to clarify the mechanism of moisture transfer depend on the thickness of the spruce(Picea sitchensis Carr.). Therefore, as the basic research of moisture transmission, the amount of moisture transmission and the moisture distribution in specimens and temperature of it's surfaces in vapor transmission process were investigated. The experiment was conducted in a steady state. and the moisture distribution was measured by knife cutting and weighing the specimens. The following conclusions were obtained ; 1. It can be found that distribution of moisture in the specimen can be approximated by two different straight lines intersecting at nine or ten percent moisture content. The amount of moisture movement defends on the gradient of moisture in the wood. 2. It is investigated that the wood surface moisture contents(MCs) are less for thinner specimens than for thick ones on the absorption side. On the other hand, the wood surface MCs are greater for thinner specimens than for thick ones on the desorption side. The main factor that affects the EMC of wood would be temperature when the relative humidity of atmosphere is constant. The specimen generate heat with the absorption and desorption process. In addition, the velocities of moisture transmission varied with the thicknesses of specimens. If the temperature of wood becomes greater, its MC decreases. Then the difference between surface MC and EMC of adsorption and desorption side becomes greater for thinner specimens. Therefore it is considered that the coefficients of moisture transfer decreases with the increases of the specimens' thicknesses.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 1999년도 Proceedings of International Symposium on Remote Sensing
• /
• pp.319-322
• /
• 1999

Land surface hydrological conditions have been considered to play an important role in the global and regional climate variability. Especially, snow, soil moisture, surface temperature, vegetation and rain are the key parameters which should be observed in the global scale. In this paper, new algorithms for these land surface hydrological parameters have been developed by introducing frequency and polarization dependencies of these parameters in the microwave radiative-transfer equations. The algorithms were applied to the TRMM Microwave Radiometer. (TMI) and validated by using the ground data obtained in the Tibetan Plateau. The estimated snow, soil moisture, surface temperature, water content of vegetation and rain patterns corresponded reasonably to the observed ones.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2005년도 춘계 학술기술논문발표대회 논문집
• /
• pp.77-80
• /
• 2005

The surface of concrete tiles is weak in moisture that it occurrenced efflorescence, but in the former study we found that it is possible to ensure moisture stability of concrete surface by autoclaving. So this study is to discuss the moisture stability and Physical Properties of high-strength glossy concrete according to time and temperature of autoclave curing. As the results, by increasing time and temperature of autoclave curing, compressive strength and surface hardness increased and glossiness decreased. In the case to 3 hour and $180^{\circ}C$ of autoclave curing, there is not effloescences in mosture stability test.

• 한국농공학회논문집
• /
• 제64권1호
• /
• pp.79-89
• /
• 2022

Soil moisture is significantly related to crop growth and plays an important role in irrigation management. To predict soil moisture, various process-based model has been developed and used in the world. Various models (Land surface model) may have different performance depending on the model parameters and structures that causes the different model output for the same modeling condition. In this study, the three land surface models (Noah Land Surface Model, Soil Water Atmosphere Plant, Community Land Model) were used to compare the model performance (soil moisture prediction) and develop the multi-model simulation. At first, the genetic algorithm was used to estimate the optimal soil parameters for each model, and the parameters were used to predict soil moisture in the study area. Then, we used the multi-model approach based on Bayesian model averaging (BMA). The results derived from this approach showed a better match to the measurements than the results from the original single land surface model. In addition, identifying the strengths and weaknesses of the single model and utilizing multi-model methods can help to increase the accuracy of soil moisture prediction.

• 패션비즈니스
• /
• 제7권2호
• /
• pp.69-81
• /
• 2003

Among the various properties of textile fabrics, the moisture-related properties are important for the textile processes or the apparel comfort characteristics. Alkaline hydrolysis results in pitting on the surface of fibers and increases the amount of hydroxyl and carboxyl end groups of the PET molecules on the fiber surface. The purpose of this study is to investigate the moisture-related properties of PET fabrics treated with quaternary ammonium compound/alkaline solution. The wetting and wicking properties of the PET fabrics were measured using the following experiments: contact angle, surface free energy, work of adhesion, vertical wicking height, moisture regain, and frictional static voltage. It was concluded that by the alkaline hydrolysis process, surface hydrophilicity and reactivity were considerably improved especially at lower levels of weight loss% and that the pitting of the fiber surface resulted in at higher levels of weight loss% was disadvantageous in moisture-related properties of PET.

• 한국수자원학회논문집
• /
• 제31권6호
• /
• pp.795-806
• /
• 1998

토양수분은 기후, 토양 및 지표면의 조건 등에 의해 영향을 받는다. 특히, 급격한 도시화 및 산업화의 영향으로 다른 영향인 자들 보다 지표면 조건의 변화가 크게 바뀌고 있다고 할 수 있으며 본 연구에서는 이러한 지표면 조건의 변화가 토양수분에 어떻게 영향을 미칠 수 있는지를 간단한 토양수분 동역학 모형을 이용하여 평가해 보았다. 먼저, 본 논문에서는 토양수분의 시간적 공간적 통계특성을 정량화 해보기 위해 논문의 전반부를 Washita ’92 자료 및 Monsoon ’90 자료의 1차원 및 2차원의 통계적 특성을 정리하는데 할해하였으며, 논문의 후반부에서 지표면 조건의 변화를 모형 매개변수의 통계적인 특성을 변화시킴으로서 고려하고 각각의 경우 토양수분이 어떻게 반응하는가를 살펴보았다. 사용된 모형은 선형저수지의 개념에 토양상층에서의 공간적 거동을 고려하기 위하여 확산의 개념을 도입하여 구성된 모형이다. 모형의 주요 매개변수는 손실률과 확산계수로 나타나고, 이들은 관측자료의 통계특성을 이용하여 추정될 수 있다. 지표면 조건의 변화는 모형의 매개변수에 다양한 통계특성을 적용하고 고려하게 된다. 특히, 본 연구에서는 지표면 조건의 평균적인 변화보다 이의 공간적인 분산도의 변화에 초점을 맞추어 분석하였다. 이는 평균적인 지표면 조건의 변화는 선형저수지의 이론에 근거하여 그 영향을 쉽게 판단할 수 있기 때문이다. 본 연구의 결과를 정리하면 다음과 같다. (1) 지표면 상태의 분산도가 커질 경우 토양수분은 더 쉽게 손실된다, (2) 토양수분의 분산도는 모의 초기에 강우의 영향으로 크게 나타나나 시간이 경과함에 따라 감소하고 점차 지표면 상태의 분산특성를 나타내게 된다, (3) 지표면 유출이나 토양상층에서의 토양수분 이동에 따른 확산의 영향은 지표면 유출이 존재하는 강우기간으로 제한되며 전체적으로 토양수분의 변화에 미미한 영향을 미친다.