• Geomechanics and Engineering
• /
• v.30 no.2
• /
• pp.201-210
• /
• 2022

This paper presents a study regarding the influence of various water levels on the characteristics of subgrade mud pumping through a self-developed test instrument. The characteristics of mud pumping are primarily reflected by axial strain, excess pore water pressure, and fine particle migration. The results show that the axial strain increases nonlinearly with an increase in cycles number; however, the increasing rate gradually decreases, thus, an empirical model for calculating the axial strain of the samples is presented. The excess pore water pressure increases rapidly first and then decreases slowly with an increase in cycles number. Furthermore, the dynamic stress within the soil first rapidly decreases and then eventually slows. The results indicate that the axial strain, excess pore water pressure, and the height and weight of the migrated fine particles decrease significantly with a low water level. In this study, when the water level is 50 mm lower than the subgrade soil surface, the issue of subgrade mud pumping no longer exist.

• 한국해양학회지
• /
• v.21 no.3
• /
• pp.146-155
• /
• 1986

Zooplankton samples of upper 50m layer in May, 1985 and of various depth intervals depending on thermal structure in October, 1985 were analyzed. Standing stock represents mean of 538inds/㎥ in spring and 267 inds/㎥ and 508inds/㎥ of whole column mean and surface layer in fall, respectively. A total of 55 and 104taxa is identified in each season and accumulated data list at least 123 species inhabiting in the study area. Copepods dominate in the zooplankton community, followed by protozoans and appendicularians in both seasons. In surface layer, distribution of subtropical species and standing stock seems to illuminate the effects of the Tsushima Current and the North Korean Cold Watermass in cold season, whereas only standing stock shows discernable variation in warm season. Concerning whole water column, depth of permanent thermocline bottom, at about 120m in fall 1985, plays significant role as a barrier to the distribution of mesopelagic cold water species. Serial sampling in October, 1985 does not reveal any perceivable diel vertical migration, which is considered to confirm the earlier suggest that owing to the lack of true abyssal species zooplankton biomass of deeper gayer is very poor, so that diel vertical migration of the East Sea is weak.

• Journal of Korea Water Resources Association
• /
• v.49 no.1
• /
• pp.73-81
• /
• 2016

This study investigates the development of lower channels and sediment sorting processes in the vegetated channels with the mixed sediment. The sediment discharges fluctuate with time and decrease with vegetation density. The bed changes with irregular patterns, and the sediment particles in the vegetated zone at the surface of bed are fine. The dimensionless geometric mean decreases with vegetation density. The fine sediment particles are trapped by vegetation, and the bed between main steam and vegetated zone increases. Moreover, the particle sizes are distributed irregularly near the zone. The hiding functions decrease with dimensionless particle size. However, the functions increase with vegetation density, which is confirmed by decreasing sediment discharge with vegetation. The lower channel is stable and the migration decreases in the condition of $0.5tems/cm^2$. However, the migration of the lower channel in the condition of $0.7stems/cm^2$ increases due to the increased sinuosity and new generated channels in the sedimentated vegetation zone.

• Molecules and Cells
• /
• v.40 no.5
• /
• pp.355-362
• /
• 2017

The ${\beta}2$ integrins are cell surface transmembrane proteins regulating leukocyte functions, such as adhesion and migration. Two members of ${\beta}2$ integrin, ${\alpha}M{\beta}2$ and ${\alpha}X{\beta}2$, share the leukocyte distribution profile and integrin ${\alpha}X{\beta}2$ is involved in antigen presentation in dendritic cells and transendothelial migration of monocytes and macrophages to atherosclerotic lesions. ${\underline{R}}eceptor$ for ${\underline{a}}dvanced$ ${\underline{g}}lycation$ ${\underline{e}}nd$ ${\underline{p}}roducts$ (RAGE), a member of cell adhesion molecules, plays an important role in chronic inflammation and atherosclerosis. Although RAGE and ${\alpha}X{\beta}2$ play an important role in inflammatory response and the pathogenesis of atherosclerosis, the nature of their interaction and structure involved in the binding remain poorly defined. In this study, using I-domain as a ligand binding motif of ${\alpha}X{\beta}2$, we characterize the binding nature and the interacting moieties of ${\alpha}X$ I-domain and RAGE. Their binding requires divalent cations ($Mg^{2+}$ and $Mn^{2+}$) and shows an affinity on the sub-micro molar level: the dissociation constant of ${\alpha}X$ I-domains binding to RAGE being $0.49{\mu}M$. Furthermore, the ${\alpha}X$ I-domains recognize the V-domain, but not the C1 and C2-domains of RAGE. The acidic amino acid substitutions on the ligand binding site of ${\alpha}X$ I-domain significantly reduce the I-domain binding activity to soluble RAGE and the alanine substitutions of basic amino acids on the flat surface of the V-domain prevent the V-domain binding to ${\alpha}X$ I-domain. In conclusion, the main mechanism of ${\alpha}X$ I-domain binding to RAGE is a charge interaction, in which the acidic moieties of ${\alpha}X$ I-domains, including E244, and D249, recognize the basic residues on the RAGE V-domain encompassing K39, K43, K44, R104, and K107.

• Korean Journal of Materials Research
• /
• v.5 no.2
• /
• pp.197-202
• /
• 1995

The surface morphology and grain growth of amophous silicon (a-Si) films deposited by low pressure chemical vapor deposition (LPCVD) have been investigated as a function of deposition and in sltu annealing condition. The film deposited at the amorphous to polycrystalline transition temperature has an extra-rough, rugged surface with (311) t.exture. At the same deposition temperature, the grain structure tends to shirr. from the polycrystalline to the amorphous phase with increasing the film thickness. It is found that nucleation of a-Si during in situ annealing at the transition temperature without breaking the vacuum starts to occur from surface Si atom migration in contrast to a heterogeneous nucleation during film deposition.

• Journal of the Korean housing association
• /
• v.24 no.1
• /
• pp.51-59
• /
• 2013

This study aims to improve the thermal comfort level of detached housing area by reducing the impact of thermal environment. The study focused on reducing surface temperature that is generated in buildings and adjacent spaces as a result of sensible heat load and presented a proposal on implementing planting method considering its outdoor condition and structure and composed materials. To perform the study, we utilized 3D-CAD to examine the outdoor condition and structure and composed materials that impact on surface temperature and conducted space design after reflecting climatic elements in simulations. The result is as follows. In reviewing temperature distribution of Heat Island Potential (HIP) of buildings and adjacent spaces, in case where green coverage ratio is increased, there was a $6^{\circ}C$ temperature difference and in regard to changes in the thermal environment in detached housing area, in case where rooftop planting, surface improvement, planting, and overall green coverage ratio is increased, there was a $10^{\circ}C$ temperature difference. In addition, there was difference in temperature in detached housing area following the changes in wind.

• Current Photovoltaic Research
• /
• v.3 no.1
• /
• pp.27-31
• /
• 2015

It is known that sulfide at the $Cu(In,Ga)Se_2$ ($CIGSe_2$) surface plays a positive role in $CIGSe_2$ solar cells. We investigated the substitution of S with Se on the $CIGSe_2$ surface in S atmosphere. We observed that the sulfur content in the $CIGSe_2$ films changed according to sulfurization temperature and Cu/(In+Ga) ratio. The sulfur content in the $CIGSe_2$ films increased with increasing the annealing temperature and Cu/(In+Ga) ratio. Also Cu migration toward the surface increased at higher temperature. Since high Cu concentration at the $CIGSe_2$ surface is detrimental role, it is necessary to reduce the S annealing temperature as low as $200^{\circ}C$. The cell performance was improved at $200^{\circ}C$ sulfurization.

• Current Applied Physics
• /
• v.18 no.12
• /
• pp.1558-1563
• /
• 2018

We demonstrate improved surface pit and phase separation in thick InGaN grown on a GaN/Si (111) substrate, using plasma-assisted molecular beam epitaxy with an indium modulation technique. The formation of surface pit and compositional inhomogeneity in the InGaN epilayer are investigated using atomic force microscopy, scanning electron microscopy and temperature-dependent photoluminescence. Indium elemental mapping directly reveals that poor compositional homogeneity occurs near the pits. The indium-modulation epitaxy of InGaN minimizes the surface indium segregation, leading to the reduction in pit density and size. The phase separation in InGaN with a higher pit density is significantly suppressed, suggesting that the pit formation and the phase separation are correlated. We propose an indium migration model for the correlation between surface pit and phase separation in InGaN.

• Economic and Environmental Geology
• /
• v.41 no.3
• /
• pp.327-334
• /
• 2008

Understanding the chemical characteristics of sediments and the nutrient diffusion from sediments to the water body is important in the management of surface water quality. Changes in chemical properties and nutrient concentration of a submerged soil were monitored for 6 months using a microcosm with the thickness of 30cm for upland soil and 15cm of water thickness above the soil. The soil color changed from yellowish red to grey and an oxygenated layer was formed on the soil surface after 5 week flooding. The redox potential and the pH of the pore water in the microcosm decreased during the flooding. The nitrate concentration of the surface water was continuously increased up to $8\;mg\;l^{-1}$ but its phosphate concentration decreased from $2\;mg\;l^{-1}$ to $0.1\;mg\;l^{-1}$ during flooding. However, the concentrations of $NH_4^+$, $PO_4^{3-}$, Fe and Mn in the pore water were increased by the flooding during this period. The increased $NO_3^-$ in the surface water was due to the migration of $NH_4^+$ formed in the soil column and the oxidation to $NO_3^-$ in the surface water. The increased phosphate concentration in the pore water was due to the reductive dissolution of Fe-oxide and Mn-oxide, which scavenged phosphate from the soil solution. The oxygenated layer played a role blocking the migration of phosphate from the pore water to the water body.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.18 no.1
• /
• pp.83-94
• /
• 2000

The mottling in coated paper is one of the most difficult problems to solve in the area of offset printing. The prevention of mottling requires optimization of coating color formation, especially the minimum of binder migration. In this paper, we studied a mottling. Kaolin clay and CaCO3 as pigment, starch and latex as binder of coating color were used in this study. We have measured surface property of 24 coated samples through k value, mottle value and transferred ink. In the equation of Walker and Fesko, the value of k was the highest and that of mottle and the mount of transferred ink were the lowest in kaolin 60 part. And it is more easy to analyze the various surface of coated paper when sample was exposed on IR.