• Earthquakes and Structures
• /
• v.15 no.2
• /
• pp.193-202
• /
• 2018

This paper studied the probability of pounding occurred between decks and abutments of a long span high-pier continuous rigid fame bridge subjected to ground motions with local soil effect. A pounding probability analysis methodology has been proposed using peak acceleration at bedrock as intensity measure (IM) for multi-support seismic analysis. The bridge nonlinear finite element (FE) models was built with four different separation distances. Effect of actual site condition and non-uniform spatial soil profiles on seismic wave propagating from bedrock to ground surface is modelled. Pounding probability of the high-pier bridge under multi-support seismic excitations (MSSE) is analyzed based on the nonlinear incremental dynamic analysis (n-IDA). Pounding probability results under uniform excitations (UE) without actual local site effect are compared with that under MSSE with site effect. The study indicates that the required design separation length between deck and abutment under uniform excitations is larger than that under MSSE as the peak acceleration at bedrock increases. As the increase of both separation distance between deck and abutment and the peak acceleration, the probability of pounding occurred at a single abutment or at two abutments simultaneously under MSSE is less than that under UE. It is of great significance considering actual local site effect for determining the separation distance between deck and abutment through the probability pounding analysis of the high-pier bridge under MSSE.

• Journal of the Microelectronics and Packaging Society
• /
• v.10 no.3
• /
• pp.37-42
• /
• 2003

In soldering of electronic packaging, the research on substituting lead-free solder materials for Pb-Sn alloys has become active due to environmental and health concerns over the use of lead. The reliability of the solder joint is very important in the development of solder materials and it is known that it is related to wettability of the solder over the substrate and microstructural evolution during soldering. It is also highly affected by type and extent of the interfacial reaction between solder and substrate and therefore, it is necessary to understand the interfacial reaction between solder and substrate completely. In order to predict the intermetallic compound (IMC) phase which forms first at the substrate/solder interface during the soldering process, a thermodynamic methodology has been suggested. The activation energy for the nucleation of each IMC phases is represented by a function of the interfacial energy and the driving force for phase formation. From this, it is predicted that the IMC phase with the smallest activation energy forms first. The grain morphology of the IMC at the solder joint is also explained by the calculations which use the energy. The Jackson parameter of the IMC grain with a rough surface is smaller than 2 but it is larger than 2 in the case of faceted grains.

• Food Science and Preservation
• /
• v.13 no.2
• /
• pp.119-124
• /
• 2006

This study was conducted to optimize roasting process of Job's tears for utilization as food Optimal condition for masting was investigated with changes in temperature and time by response surface methodology. The qualities of water extract such as browning degree, polyphenol and DPPH radical scavenging ability were affected more by roasting temperature than time. The values increased with temperature and time proportionally. The response variables were more significant with temperature than time and the established polynomial model was suitable (P>0.05) model by Lack-of-Fit analysis. Optimal roasting conditions with the limit of $0.2{\sim}0.3$ browning degree, $2.0{\sim}2.5{\mu}g/mL$ polyphenol, $30{\sim}40%$ scavenging ability and $0{\sim}100$ hue angle were $215^{\circ}C$ and 32 min.

• Journal of the Korean Society for Precision Engineering
• /
• v.30 no.11
• /
• pp.1121-1128
• /
• 2013

Ultrasonic grinding system is that the ultrasonic vibration by ultrasonic actuator is applied on conventional grinding system during grinding process. The Ultrasonic vibration with a frequency of over 20kHz can reduce grinding forces and increase surface quality, material removal rate (MRR) and grinding wheel life. In addition, ultrasonic vibration assisted grinding can be used for the materials that are difficult to cut. In this paper, methodology for ultrasonic tools is studied based on finite element method, and in turn the ultrasonic tools are designed and fabricated. It is found that the ultrasonic tool can vibrate with a frequency of 20kHz and amplitude of $25{\mu}m$. In order to verify the machining performance, the grinding experiment is performed on titanium alloy. By applying ultrasonic vibration, the grinding force and temperature are reduced and MRR is increased compared with the conventional grinding.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2006.06a
• /
• pp.55-60
• /
• 2006

Draw-bead is applied to control the material flow in a stamping process and improve the product quality by controlling the draw-bead restraining force (DBRF). Actual die design depends mostly on the trial-and-error method without calculating the optimum DBRF. Die design with the predicted value of DBRF can be utilized at the tryout stage effectively reducing the cost of the product development. For the prediction of DBRF, a simulation-based prediction model of the circular draw-bead is developed using the Box-Behnken design with selected shape parameters such as the bead height, the shoulder radius and the sheet thickness. The value of DBRF obtained from each design case by analysis is approximated by a second order regression equation. This equation can be utilized to the calculation of the restraining force and the determination of the draw-bead shape as a prediction model. For the evaluation of the prediction model, the optimum design of DBRF in sheet metal forming is carried out using response surface methodology. The suitable type of the draw-bead is suggested based on the optimum values of DBRF. The prediction model of the circular draw-bead proposes the design method of the draw-bead shape. The present procedure provides a guideline in the tool design stage for sheet metal forming to reduce the cost of the product development.

• Journal of Veterinary Clinics
• /
• v.31 no.1
• /
• pp.40-45
• /
• 2014

Abalone herpes-like virus (AbHV) is a fatal disease of abalones that impose severe economic impacts on the industry of infected regions due to high mortality. The aim of this study was to quantify the risk of introducing AbHV into Korea through the importation of live abalones for human consumption by import risk analysis (IRA). Monte Carlo simulation models were developed to provide estimates of the probability that a ton of imported abalone contains at least one AbHV-infected individual, using historical trade data and relevant literatures. A sensitivity analysis with 5,000 iterations was also conducted to determine the extent to which input parameters affect the outcome of the model. Although many uncertainties were present in the data, the results indicated that, if 5,000 tons of abalone were imported from a hypothetical exporting country with low prevalence of AbHV (model 1), there would be at least one AbHV-infected abalones in 4,816 of those tons (96.3%), while there would be at least one AbHV-infected abalones in 100% of those tons imported from country with high prevalence (model 2). Sensitivity analysis indicated that for model 1, prevalence was the strongest influence factor on the predicted number of infections. For model 2, background mortality and washing to reduce the risk of surface contamination during processing were the major contributing factors. Risk management strategies need to be enforced to reduce the risk of AbHV introduction in that at least one infected abalone would remain in a consignment from country even with a low prevalence of AbHV infection. The methodology and the results presented here will contribute to improve the development of AbHV management program, and with more accurate data this IRA model will aid science-based decision-making on mitigation strategies to reduce the risk of AbHV introduction in Korea.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.49 no.4
• /
• pp.436-444
• /
• 2016

Clamshells, which comprise more than 50% of a clam’s weight, are a major byproduct of the clam industry and are mainly composed of insoluble calcium carbonate. This study investigates the use of clamshells as a natural calcium resource. Highly soluble powdered calcium lactate (LCCL) was prepared from the calcined powdered shells of littleneck clams (LCCP) using response surface methodology (RSM) to predict optimum conditions. These conditions, as derived from pH, solubility, and yield of 11 LCCLs manufactured according to the RSM model, were 1.80 M lactic acid and 1.13 M LCCP. The actual values of pH (6.98), solubility (93.99%), and yield (351.23%) under the optimized conditions were as predicted. The derived LCCL exhibited a strong buffering capacity in the range of pH 2.78-3.90 when combined with less than 2 mL of 1 N HCl. The ranges of calcium content and solubility of LCCL were 7.7-17.5 g/100 g and 96.6-98.9%, respectively. Fourier transform infrared spectroscopy (FT-IR) of the LCCL identified it as calcium lactate pentahydrate, and field emission scanning electron microscopy (FESEM) revealed an irregular and rod-like microstructure. These results confirm the potential use of clamshells, converted to highly soluble organic acid calcium, as an additive to enhance calcium content in food ingredients.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.44 no.3
• /
• pp.197-206
• /
• 2011

This study was conducted to optimize processing of functional seasoning sauce for instant noodles (SSIN) using response surface methodology (RSM), and to compare the functional properties of commercial SSIN. Central composite designs were adopted in the SSIN processing for ingredient formula optimization. Concentrations of sea tangle ($X_1$), traditional soy sauce ($X_2$), yeast extract ($X_3$) and Ecklonia cava extract (ECE) ($X_4$) were chosen as independent variables. The dependent variables were glutamic acid content ($Y_1$), score of sensory evaluation ($Y_2$), and antioxidative activity ($Y_3$). We found the optimal conditions to be $X_1$=3.91%, $X_2$=20.57%, $X_3$=3.04% and $X_4$=3.78%. The predicted values of the multiple response optimal conditions were $Y_1$=124.0 mg/100 g, $Y_2$=7.6 and $Y_3$=1.95. The antioxidative activity (PF, PF=oil induction period with sauce/oil induction period with distilled water) and ACE inhibitory activity of ECE-added SSIN were 1.98 and 29.0%, respectively, which were significantly higher than those of commercial SSIN (1.09 and 4.4%, respectively).

• 한국생물공학회:학술대회논문집
• /
• 2002.04a
• /
• pp.381-384
• /
• 2002

Response surface methodology (RSM) was successfully applied to optimize for the production of Ganoderma lucidum in batch fermentations using the whey (40,000 mg latose/L) as substrate. This study was performed according to the central composite design (CCD) with respect to pH and temperature, where the designed intervals were 3.3$22.9^{\circ}C$$37.1^{\circ}C$, respectively. A second-order factorial design of the experiments was used to build empirical models providing a quantitative interpretation of the relationships between the two variables. The optimum conditions to maximize the production of G. lucidum were pH 4.2 and $28.3^{\circ}C$. At optimum conditions, the mycelial dry weight (MDW) and residual soluble COD (SCOD) were simultaneously used to evaluate the biokinetic coefficients assocoated with substrate inhibition model by nonlinear least squares method with 95% confidence interval. The. maximum microbial growth rates (${\mu}m$), half saturation coefficient ($K_s$), and the inhibition substrate concentration ($K_{is}$) were determined to be 0.095 l/hr, 128,000 mg SCOD/L and 49,000 mg SCOD/L, respectively. And the microbial yield coefficient (Y), biomass decay rate coefficient ($K_d$), and the maintenance energy coefficient ($m_s$) were determined to be 0.37 mg MDW/mg SCOD, 0.001 1/hr, and 0.0015 1/hr, respectively.

• Korean Chemical Engineering Research
• /
• v.58 no.2
• /
• pp.266-272
• /
• 2020

In this study, the production of ethyl levulinate from chitosan using successive acid-catalyzed hydrolysis and esterification was investigated. To optimize and analysis the reaction factors and heir reciprocal interaction, response surface methodology was introduced. In the effect of water content in ethanol solvent, the production yield of ethyl levulinate was high at 5% water content (or 95% ethanol). As a result of optimization of reaction factors, 30.1% ethyl levulinate yield was obtained under the condition of 200 ℃, 3.19% chitosan, 0.49M sulfuric acid, 5% water content, and 58 min. Finally, the formation yield of ethyl levulinate was tended to enhance by increase of combined severity factor. This result indicated that the potential of chitosan as feedstock for production of chemicals and fuels.