• 펄프종이기술
• /
• 제30권3호
• /
• pp.74-83
• /
• 1998

The phenomenon of decrease in sizing efficiency when the stock temperature is increased is well recognized as summer sizing, and this is believed to be caused by uneven distribution of sizing agents on paper surface most often incurred by coagulation of sizing agents. When unevenly sized paper is used as coating base stock, nonuniform consolidation of the coating layer may result, which, in turn, causes uneven distribution of binder on coating surface. This causes nonuniform ink absorption to produce print mottle. In this study the effects of simple or polymeric electrolytes, storage temperature and time on the coagulation of cationic dispersed rosin size were investigated using a turbidity measurement method which was verified to correlate well with the particle size of rosin emulsion or its coagulates. Handsheets sized with rosin dispersions coagulated under various conditions were prepared and their sizing degree and coated paper properties including gloss and ink density were examined. The relationship between the sizing nonuniformity of coated papers and its ink absorption property was evaluated. Turbidity of rosin emulsion increased as the storage temperature and time were increased. Addition of simple or polymeric electrolytes caused reduction in $zeta$ -potential of the rosin dispersion and accelerated the coagulation tendency substantially. Reversion of the $zeta$ -potential of rosin dispersion, however, did not occur when coagulation was induced with simple electrolytes. On the other hand, addition of an anionic polyelectrolyte reversed the $zeta$ -potential of the flocculated rosin dispersion. This indicated that electrical double layer compaction and bridging flocculation were coagulation mechanisms for simple and polymeric electrolytes, respectively. Sizing degree decreased as coagulation of rosin was increased. Paper gloss, ink gloss and ink density were increased when sizing degree of base stock was increased most probably due to prevention of base paper swelling and increased binder migration to coating surface. This suggested that uneven printing ink density occurred when uneven sizing development was induced by coagulation of rosin particles.

• 한국인쇄학회지
• /
• 제24권1호
• /
• pp.13-22
• /
• 2006

We investigated the effects of the enzyme treatment of fiber for printability of coated paper. The results could summarized as follows, 1. The samples with enzyme treatment (average 87.8%) have higher ink gloss than the blank (85.6%). Printed density showed same trends with the ink gloss. However, the ${\beta}$-Glucosidase treated sample showed the lowest printed density (2.14 %) due to the lowest thickness of the ink layer, which is influenced by coated weight and surface smoothness. 2. The samples whose base paper was Xylanase and ${\beta}$-Glucosidase treated showed higher surface strength (4.2% and 4.0%, respectively) than the blank while the samples with the Hernicellulase and ${\beta}$-Glucuronidase treatment showed lower surface strength (3.2%and 3.7%, respectively) due to the influence of air permeability. 3. Hemicellulase and ${\beta}$-Glucuronidase treated base paper, which have relatively low air permeability, showed better ink repellence (4.3 and 4.4 %, respectively) than the blank (3.8 %). 4. The blank and the Xylanase treated base paper showed high set-off, which is the last category of printability.

• 보존과학회지
• /
• 제24권
• /
• pp.43-56
• /
• 2008

현재 철제유물 강화처리 시 사용하는 아크릴계 수지인 Parabid NAD10은 용제로 VM&P Naphtha만을 사용하고 있다. 그러나 이를 사용하여 강화처리 할 경우 코팅 후의 광택이 높아 전시 및 관람에 불편함을 준다는 문제가 제기되고 있다. 이러한 단점 보완을 위해 대체 용제로 YK-VMP를 선정하여 각 용제별 코팅 특성을 비교 분석하였다. 표면관찰, 박막 두께, 접착력, 접촉각 및 표면에너지, 광택도, 황변실험, EIS 평가 등의 일련의 분석을 통해 용제별 코팅 특성을 비교한 결과, 기존의 VM&P Naphtha를 대신하여 YK-VMP를 사용하여도 강화처리 효과에는 큰 영향을 주지 않으면서도 광택을 더 낮춰주는 효과가 나타나는 것을 확인하였다.

• 한국표면공학회지
• /
• 제41권1호
• /
• pp.33-37
• /
• 2008

Polycarbonate has a high transmittance to light, low specific gravity, flexibility and cost-effectiveness that extends the application field of the polymer to bio-engineering, optics, electronic parts, etc. Moreover, electro plating of metallic film on PC could endow the parts the electromagnetic interference shielding capability. However, poor adhesion of copper on PC limited the wide usage in the industry. In this work, a composite(PC/ABS) and MmSH(Momentary mold Surface Heating) injection process were used to improve the plating characteristics; plating thickness, gloss and adhesion. Also plasma treatment and chemical treatment were employed for improving adhesion. Plating characteristics on PC/ABS were better than those on PC due to the anchoring effect of butadiene. MmSH injection process could ameliorate the gloss and coating adhesion. Also plating thickness and adhesion of PC and PC/ABS were increased by plasma treatment.

• 폴리머
• /
• 제38권1호
• /
• pp.1-8
• /
• 2014

표면 색상과 모폴로지가 우레탄-아크릴 코팅 소재 표면의 긁힘 거동에 미치는 영향을 조사하였다. 동일한 실험 조건에서, 흰색, 적색, 검정색 시험편의 순으로 긁힘 저항성이 우수함을 보였다. 이런 결과는 명암 대비효과를 가지고 설명될 수 있다. 즉 검정색 시험편의 경우, 긁힘이 생성된 손상 영역은 빛을 확산 반사하여 백화현상이 일어나고, 그 결과 주변 검정색과 대비되어 더욱 뚜렷이 구별된다. 반면, 흰색 시험편은 주변 흰색이 보호색 역할을 하여, 긁힘 손상 부위를 인지하기 어렵게 된다. 광택도가 높은 시험편 표면일수록 에틸렌, 실리카 성분 및 카르보닐 그룹의 증가를 관찰할 수 있었다. 실리카 입자에 의한 표면 강성의 증가와 산화에 의한 카르보닐기 생성은 긁힘 저항성의 증가를 유도하고, 폴리에틸렌 왁스의 증가는 표면을 매끄럽게 하여 광택도의 향상에 기여한 것으로 보인다. 연구결과를 바탕으로 우레탄-아크릴 코팅 소재의 긁힘 저항성을 향상시킬 수 있는 기술적 접근 방법에 대해 토의하였다.

• 한국인쇄학회지
• /
• 제14권2호
• /
• pp.81-99
• /
• 1996

The characteristics of printing inks are affected, to a greater or lesser extent, by the size and distribution of the pigment particles in the dispersion. Color strength, transparency and gloss increase with a decrease in particle size of pigments and with an increase in surface area of pigments. On the contrary, opacity and lightfastness tend to increases with an increase in particle size of pigments and with a decrease in surface are and particle size if pigments on the physical properties of printing ink which made up vehicles for sheet fed and organic pigment Lake Red C(C.I Pigment Red 53:1) that different surface area and particle size.

• The Journal of Advanced Prosthodontics
• /
• 제10권1호
• /
• pp.32-42
• /
• 2018

PURPOSE. The purpose of this study was to derive and compare the inherent color (hue angle, chroma), translucency ($TP_{SCI}$), surface gloss (${\Delta}E^*_{SCE-SCI}$), and surface roughness ($R_a$) amongst selected shades and brands of three hybrid CAD/CAM blocks [GC Cerasmart (CS); Lava Ultimate (LU); Vita Enamic (VE)]. MATERIALS AND METHODS. The specimens (N = 225) were prepared into square-shaped ($12{\times}12mm^2$) with different thicknesses and shades. The measurements of color, translucency, and surface gloss were performed by a reflection spectrophotometer. The surface roughness and surface topography were assessed by white light interferometry. RESULTS. Results revealed that hue and chroma values were influenced by the material type, material shade, and material thickness (P < .001). The order of hue angle amongst the materials was LU > CS > VE, whereas the order of chroma was VE > CS > LU. $TP_{SCI}$ results demonstrated a significant difference in terms of material types and material thicknesses ($P{\leq}.001$). $TP_{SCI}$ values of the tested materials were ordered as LU > CS > VE. ${\Delta}E^*_{SCE-SCI}$ and $R_a$ results were significantly varied amongst the materials (P < .001) and amongst the shades (P < .05). The order of ${\Delta}E^*_{SCE-SCI}$ amongst the materials were as follows $LU>VE{\geq}CS$, whereas the order of $R_a$ was $CS{\geq}VE>LU$. CONCLUSION. Nano-ceramic and polymer-infiltrated-feldspathic ceramic-network CAD/CAM materials exhibited different optical, inherent color and surface parameters.

• 보존과학회지
• /
• 제27권4호
• /
• pp.415-420
• /
• 2011

금속 유물의 부식 방지를 위하여 우레탄 코팅제를 제조하였다. 제조된 우레탄 코팅제를 이용하여 그 동안 금속유물 코팅제로 주로 사용된 아크릴계 코팅제의 광택성과 코팅 후에 나타나는 변색 등의 문제점을 해결하고자 하였다. 이를 위하여 합성된 우레탄 코팅제는 아크릴계의 코팅제보다 광택이 낮고 색상 변화가 적도록 제조하였다. 이 코팅제는 기존의 코팅제에 비하여 얇은 코팅 층을 형성하면서도 우수한 접착력을 나타내었으며, 다양한 주위 환경에 의해 나타나는 금속 유물의 표면 산화에 대한 저항력과 표면에서의 발수력이 우수하였다. 또한, 아세톤, 톨루엔, 자일렌 등의 유기용매에 쉽게 용해되는 가역성이 우수한 결과를 나타내고 있어 기존의 아크릴계 금속 유물 코팅 재료를 대체할 수 있는 안정적인 코팅제로 사용할 수 있을 것으로 판단된다.

• 펄프종이기술
• /
• 제39권2호
• /
• pp.25-30
• /
• 2007

Recently the use of web offset printing has been increasing, which can provide high print speed, mass production, and high print quality. However, high speed web offset printing has frequently undergone a blistering problem when the printed paper passes through hot air dryers. Blistering occurs in the middle of the base paper or in the coating layer. This paper focused on the blistering occurring in the base paper. In order to elucidate the effect of pigment ratio on blistering, 6 types of coating color were prepared with varying GCC/clay ratios and printability and blistering were investigated focusing on structure changes in the coating layer. When the clay content in the coating layer was increased, surface roughness and surface strength were decreased and paper gloss was increased. In addition, it was found that the coating layer structure with high clay content, which contains lots of discontinuous pores, hindered water vapors to penetrate out and, as a result, blistering occurred.

• 펄프종이기술
• /
• 제38권5호
• /
• pp.47-53
• /
• 2006

To meet the ever increasing quality demand of coated papers and duplex boards, the local gloss variation and print unevenness must be avoid. To do this, surface roughening phenomenon which affects local gloss and print unevenness was investigated. In this study, the effect of roughness and densification of sheet obtained at various calendering conditions on surface roughening was examined. To evaluate the calendering effect properly we introduced a new value of roughening index by moisture for evaluation of surface roughening. Caliper and roughness of sheet decreased with increasing of calendering temperature and pressure, and the remarkable reduction of those properties occurred at the temperature around Tg. Roughening index increased when the amount of water increased and calendaring temperature and pressure increased. And as the sheet became denser by calendering, the roughening index increased to some extent. But roughening index by moisture is the lowest for sheet precalendered at higher temperature condition. When the surface of calendered sheet is rougher, there is more roughening of surface. The severe condition of calendering made the roughening index by moisture small.