• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2021년도 학술발표회
• /
• pp.204-204
• /
• 2021

Terrestrial water storage (TWS) includes all components of water (e.g., surface water, groundwater, snow and ice) over the land. So accurately predicting and estimating TWS is important in water resource management. Although many land surface models are used to predict the TWS, model output has errors and biases in comparison to the observation data due to the model deficiencies in the model structure, atmospheric forcing datasets, and parameters. In this study, Gravity Recovery And Climate Experiment (GRACE) satelite TWS data is assimilated in the Community Land Model version 5 with a biogeochemistry module (CLM5.0-BGC) over East Asia from 2003 to 2010 by employing the Ensemble Adjustment Kalman Filter (EAKF). Results showed that TWS over East Asia continued to decrease during the study period, and the ability to simulate the surface water storage, which is the component of the CLM derived TWS, was greatly improved. We further investigated the impact of assimilated TWS on the vegetated and carbon related variables, including the leaf area index and primary products of ecosystem. We also evaluated the simulated total ecosystem carbon and calculated its correlation with TWS. This study shows that how the better simulated TWS plays a role in capturing not only water but also carbon fluxes and states.

• 한국항공우주학회지
• /
• 제43권12호
• /
• pp.1048-1053
• /
• 2015

고온 환경에 노출되는 열 보호 시스템의 삭마 현상에 의한 표면 침식은 주로 재료의 두께 방향으로 진행된다. 본 논문에서는 0.4MW 아크 가열 풍동을 통한 삭마 실험을 수행하고 삼차원 표면 측정기를 이용하여 삭마 재료의 표면 상태를 측정하였다. 특히, 정밀한 삼차원 이미지 데이터를 획득하여 고온 플라즈마 환경에서 진행된 삭마 재료의 표면 거칠기와 침식량을 산출하였다. 이와 같은 삭마 실험 전후에 발생된 시편의 질량 감소도 함께 측정함으로써 표면 특성의 변화를 정량적으로 비교 및 분석하였다.

• Nuclear Engineering and Technology
• /
• 제54권6호
• /
• pp.1947-1953
• /
• 2022

As the plasma facing material in the nuclear fusion reactor, tungsten has to bear the irradiation impact of high energy particles. The surface quality of tungsten may affect its irradiation resistance, and even affect the service life of fusion reactor. In this paper, tungsten samples with different surface quality were polished by mechanical processing, subsequently conducted by D₂⁺ implantation and thermal desorption. D₂⁺ implantation was performed at room temperature (RT) with the irradiation dose of 1 × 10²¹ D₂⁺/m² by 5 keV D₂⁺ ions, and thermal desorption spectroscopy measurements were done from RT to 900 K. In addition, He irradiation was also performed by 50 eV He⁺ ions energy with the fluxes of 5.5 × 10²¹ m^-2s^-1 and 1.5 × 10²² m^-2s^-1, respectively. Results reveal that the hydrogen/helium irradiation behavior are both related to surface quality. Samples with high surface quality has superior D₂⁺ retention behavior with less D₂ retained after implantation. However, such samples are more likely to generate fuzzes on the surface after helium irradiation. Different morphologies (smooth, wavy, pyramids) after helium irradiation also demonstrates that the surface morphology is related to tungsten crystallographic orientation.

• 대한원격탐사학회지
• /
• 제30권6호
• /
• pp.743-754
• /
• 2014

본 연구에서는 2005년부터 2008년 사이 한반도에서 고농도 $SO_2$가 관측된 날에 대하여 Ozone Monitoring Instrument (OMI) 이산화황자료 및 역궤적 계산을 통해서 중국으로부터 한반도로 장거리 수송되는 이산화황 flux의 계산 방법을 처음으로 소개하였다. 지표공기에서 측정된 이산화황 농도값과 OMI 센서에서 측정된 이산화황 층적분농도값을 이용하여 장거리 수송된 지표공기에서의 이산화황 flux와 지표부터 특정고도 사이 공기층 내에서의 평균 이산화황 flux를 각각 계산하였다. 위성관측을 이용하여 산출된 평균 flux값은 0.81 이고 최대 $2.11g{\cdot}m^{-2}{\cdot}h^{-1}$ 까지 산출되었고, 지점관측을 통한 지표공기로 유입되는 이산화황의 flux값은 평균 0.50 이고 최대 $1.18g{\cdot}m^{-2}{\cdot}h^{-1}$ 까지 산출 되었다. OMI센서와 지점관측 자료를 바탕으로 산출된 각각의 flux를 상호 비교하였으며 대부분의 경우 수용지역의 지표공기로 유입되는 이산화황 flux 값들이 지표부터 최대 1.5 km 사이의 장거리 수송되어 유입된 공기층 내의 평균 이산화황 flux 값들보다 높은 것으로 계산되었다. 발생원 지역에서 강한 저기압이 발견되는 경우를 포함하여 중국 발생원 지역으로부터 장거기 수송된 공기덩어리가 수용지역의 1.0에서 1.5 km 고도로 빠르게 유입되는 경우 지표부터 최대 1.5 km 사이 공기층 내의 평균 이산화황 flux 는 지표공기에서 산출된 flux 보다 높게 산출되는 경향을 보였다. 추가적으로 산출된 $SO_2$ flux값의 오차를 계산하고 오차값에 영향을 주는 인자들에 대해서 논의 하였다.

• Ocean and Polar Research
• /
• 제28권4호
• /
• pp.395-405
• /
• 2006

We measured the fugacity of $CO_2$ $(fCO_2)$, temperature, salinity, nutrients and chlorophyll a in the surface water of the western North Pacific $(4^{\circ}30'{\sim}33^{\circ}10'N,\;144^{\circ}20'{\sim}127^{\circ}35'E)$ in September 2002. There were zonally several major currents which have characteristics of specific temperature and salinity (NECC, North Equatorial Counter Current; NEC, North Equatorial Current; Kuroshio etc.). Surface $fCO_2$ distribution was clearly distinguished into two groups, tropical and subtropical areas of which boundary was $20^{\circ}N$. In the tropical Int surface $fCO_2$ was mainly controlled by temperature, while in the subtropical area, surface $fCO_2$ was dependent on total inorganic carbon contents. Air-sea $CO_2$ flux showed a large spatial variation, with a range of $-0.69{\sim}0.79 mmole\;m^{-2}day^{-1}$. In the area of AE (Anticyclonic Eddy), SM(Southern Mixed region) and NM (Northern Mixed region), the ocean acted as a weak source of $CO_2$ $(0.6{\sim}0.79 mmole\; m^{-2}day^{-1})$. In NECC, NEC, Kuroshio and ECS (East China Sea), however, the fluxes were estimated to be $-0.3mmole\; m^{-2}day^{-1})$ for the first three regions and $-1.2mmole\; m^{-2}day^{-1})$ for ECS respectively, indicating that these areas acted as sinks of $CO_2$. The average air-sea flux in the entire study area was $0.15mmole\;m^{-2}day^{-1})$, implying that the western North Pacific was a weak source of $CO_2$ during the study period.

• Advances in Computational Design
• /
• 제7권1호
• /
• pp.57-68
• /
• 2022

A simulation study of the distribution of magnetic flux induced by a U-shaped electromagnet into a two-layer massive object with variations in the depth and properties of the surface layer has been carried out. It has been established that the hardened surface layer "pushes" the magnetic flux into the bulk of the magnetized object and the magnetic flux penetration depth monotonically increases with increasing thickness of the hardened layer. A change in the thickness and magnetic properties of the surface layer leads to a redistribution of magnetic fluxes passing between the poles of the electromagnet along with the layer and the bulk of the steel object. In this case, the change in the layer thickness significantly affects the magnitude of the tangential component of the field on the surface of the object in the interpolar space, and the change in the properties of the layer affects the magnitude of the magnetic flux in the magnetic "transducer-object" circuit. This difference in magnetic parameters can be used for selective testing of the surface hardening quality. It has been shown that the hardened layer pushes the magnetic flux into the depth of the magnetized object. The nominal depth of penetration of the flow monotonically increases with an increase in the thickness of the hardened layer.

• Ocean and Polar Research
• /
• 제25권1호
• /
• pp.41-52
• /
• 2003

Sediment trap samples were collected to find out characteristic behaviors of metals in the settling particles by using time-series sediment traps at 678m and 1678m water depths in the Bransfield Strait from December 27th, 1999 to December 26th, 2000. Total mass fluxes at the intermediate water depth (678m water depth) were high in the austral summer and low in the austral winter, whereas at the deep water depth (1678m water depth) they showed high values in both the summer and winter. Total mass fluxes were generally higher in the deep water depth than in the intermediate water depth, which indicates that a substantial amount of sediments are laterally transported by strong currents into the deep basin from the shallow water depths. Aluminium contents also showed large seasonal variations with high values in the winter and low values in the summer. On the contrary, organic carbon contents were high in the summer and low in the winter. Al contents were negatively correlated with organic carbon contents, which may be ascribed that detrital particles are diluted by organic matter produced by phytoplankton in the surface waters. Metals measured in this study exhibited three characteristic behaviors; 1) a positive correlation with Al-Ti, Fe, Mn, V, Co, and Ba, 2) a negative correlation with Al-Cd and Zn, 3) no relationship with Al-Sr, Cu, Cr, Ni. Terrestrial materials may act as a major source fer metals that are positively correlated with Al, and organic matter may be a major source for metals that are negatively correlated with Al. Enrichment factor (EF) of Fe, Mn, Ba, Vi Co, Sr, Cr, and Ni ranged from 0.5 to 1.5, whereas EF of Zn, Cu, and Cd showed much higher values than 1.

• 한국전산유체공학회지
• /
• 제18권2호
• /
• pp.66-71
• /
• 2013

In this paper, the supersonic flows around space launch vehicles have been numerically simulated by using a 3-D RANS flow solver. The focus of the study was made for investigating plume-induced flow separation(PIFS). For this purpose, a vertex-centered finite-volume method was utilized in conjunction with 2nd-order Roe's FDS to discretize the inviscid fluxes. The viscous fluxes were computed based on central differencing. The Spalart-Allmaras model was employed for the closure of turbulence. The Gauss-Seidel iteration was used for time integration. To validate the flow solver, calculation was made for the 0.04 scale model of the Saturn-5 launch vehicle at the supersonic flow condition without exhaust plume, and the predicted results were compared with the experimental data. Good agreements were obtained between the present results and the experiment for the surface pressure coefficient and the Mach number distribution inside the boundary layer. Additional calculations were made for the real scale of the Saturn-5 configuration with exhaust plume. The flow characteristics were analyzed, and the PIFS distances were validated by comparing with the flight data. The KSLV-1 is also simulated at the several altitude conditions. In case of the KSLV-1, PIFS was not observed at all conditions, and it is expected that PIFS is affected by the nozzle position.

• 한국해안·해양공학회논문집
• /
• 제32권4호
• /
• pp.242-251
• /
• 2020

본 연구에서는 직립 안벽 앞에 설치된 2차원 진동수주형 파력발전장치의 추출효율과 반사율을 규칙파와 불규칙파에 대하여 살펴보고 둘 사이의 상관관계를 조사하였다. 해석이론으로 선형포텐셜 이론에 기반을 둔 고유함수전개법을 사용하였다. 공기실이 완전 개방되었을 때 입사파에 의한 산란문제와 공기실이 닫혀 있을 때 공기실내의 변동압력에 의한 파의 방사문제를 풀어 공기실 내부의 유량을 구하고, 이를 공기실내의 공기 흐름에 대한 연속방정식에 대입하여 변동압력을 구한다. 추출파워가 최대가 되는 최적 터빈계수를 적용하여 진동수주형 파력발전장치의 최대 추출효율과 반사율을 규칙파와 불규칙파에 대하여 구하였다. 파랑에너지를 효율적으로 흡수하도록 설계된 진동수주형 파력발전장치는 동시에 반사파를 줄이는데 기여하였다.

• Nuclear Engineering and Technology
• /
• 제48권2호
• /
• pp.525-532
• /
• 2016

High-energy linear accelerators are increasingly used in the medical field. However, the unwanted photo-neutrons can also be contributed to the dose delivered to the patients during their treatments. In this study, neutron fluxes were measured in a solid water phantom placed at the isocenter 1-m distance from the head of an18-MV linac using the foil activation method. The produced activities were measured with a calibrated well-type Ge detector. From the measured fluxes, the total neutron fluence was found to be $(1.17{\pm}0.06){\times}10^7n/cm^2$ per Gy at the phantom surface in a $20{\times}20cm^2$ X-ray field size. The maximum photo-neutron dose was measured to be $0.67{\pm}0.04$ mSv/Gy at $d_{max}=5cm$ depth in the phantom at isocenter. The present results are compared with those obtained for different field sizes of $10{\times}10cm^2$, $15{\times}15cm^2$, and $20{\times}20cm^2$ from 10-, 15-, and 18-MV linacs. Additionally, ambient neutron dose equivalents were determined at different locations in the room and they were found to be negligibly low. The results indicate that the photo-neutron dose at the patient position is not a negligible fraction of the therapeutic photon dose. Thus, there is a need for reduction of the contaminated neutron dose by taking some additional measures, for instance, neutron absorbing-protective materials might be used as aprons during the treatment.