• Journal of Advanced Marine Engineering and Technology
• /
• 제24권2호
• /
• pp.82-89
• /
• 2000

에지검출은 영상인식의 첫 단계임을 동시에 영상인식의 성능을 좌우하는 아주 중요한 단계이다. 기존의 기울기연산자나 표면접합에 의한 에지검출과 달리 본 논문에서는 에지의 영역정보를 이용한 에지검출 알고리즘을 제시한다. 먼저 에지의 적합한 위치, 에지의 두께 그리고 에지의 길이에 대한 정의를 제시하고, 제시된 에지정의를 기본으로한 12개의 에지검출 윈도우와 알고리즘을 제안하였다. 제안된 12개의 윈도우는 모든 형태의 에지를 추출할 수 있는 에지검출윈도우로써 일반적으로 많이 사용되고 있는 기울기 연산자나 0점교차 연산자인 LoG 연산자보다 좋은 에지검출 성능을 보여 주었다.

• 대한의용생체공학회:의공학회지
• /
• 제14권1호
• /
• pp.63-72
• /
• 1993

In this paper, the effect of background grey levels on the visual perception of target image displayed on CRT monitor has been investigated. The purpose of this study is to investigate the efficacy of CRT monitor as a display medium of image Information especially in medical imaging field. Tllree sets of experiments have been performed in this study : the first was to measure the luminance response of CRT monitor and to find the best fitting equation, and the second was the psychophysical experiment measuring the threshold grey level differences between the target image and the background required for visual discrimination (or various background grey levels, and the third was to develop a visual model that is predictable of the threshold grey level difference measured in the psychophysical experiment. The result of psycophysical experiment shows that the visual perception performance is significantly degraded in the range of grey levels lower than 50, which is turned out due to she low luminance change of CRT monitor in this range while human eye has been adapted lo relatively bright ambient illumination. And it Is also shown in the simulation study using the developed visual model that the dominant factor degrading the visual performance is the reflected light from the monitor surface by ambient light in general illumination condition.

• 물과 미래
• /
• 제29권5호
• /
• pp.235-244
• /
• 1996

호수에서의 수직온도분포를 모의하기 위하여, 수리학적 특성 즉 유속분포가 필요없는 일차원 와확산모델 및 혼합층모델이 개발, 적용되었으며 각 모델의 결과가 비교, 검토되었다. 전자는 지배방정식 유도시 분자확산을 모델적용시 년간 수면변화를 무시했으며, 후자는 간단한 해석을 위하여 일정한 층의 두께를 가정하였다. 호수표면과 바닥에서의 온도경계조건이 각각 열 에너지의 이동에 의해서 결정되도록 하는 와확산모델은 explicit 유한차분법을, 두층을 이용하는 혼합층모델은 Runge-Kutta 방법을 사용하였다. 측정된 데이타와 와확산모델 및 혼합층모델의 계산치와 비교해본 결과, 만족한 결과를 도출하였다. 따라서, 호수관리의 수단으로 이 모델들을 유용하게 이용할 수 있을 것으로 사료된다.

• 대한화학회지
• /
• 제40권1호
• /
• pp.20-27
• /
• 1996

분광학적 실험 자료들로부터 안정하고 정확한 위치에너지를 역으로 얻어내는 방법에 대하여 연구하였다. 이러한 역과정 방법은 비선형 역과정 문제에서 야기되는 불안정성을 위치에너지가 유연하게 연속적이라는 제한 조건을 사용하여 최적의 해를 얻어내는 Tikhonov의 규칙화에 기초를 두고 있다. 이 방법의 장점은 특정한 형태의 위치에너지 변수를 맞추는 보통의 방법과는 달리 위치에너지를 분자간 거리의 연속함수로 다루었다. 이 방법을 실험적으로 얻은 Ar-Ar계의 분광학적 자료에 적용하여 전 구간에서 정확한 위치에너지를 찾아가는 것을 보여주었고, Morse나 RKR 방법으로 얻은 위치에너지의 부정확한 먼거리 인력 부분을 보정할 수 있음을 보여주었다.

• 한국기계가공학회지
• /
• 제4권2호
• /
• pp.37-42
• /
• 2005

Recently $6{\sigma}$ quality control is an most important strategy to many enterprises in order to be a top company in the world, because it is an excellent scientific method to achieve the best quality control for their management and products. SY company is a small and medium one that has the quality problem for a long time such as occurring cracks on the surface of commutator at his assembly line while being assembled a rotor shaft and commutator of DC motor. This research was started to improve this problem by $6{\sigma}$ process, and as the results of this study, first, to find three vital fews, second, to get an achievement of about 21% improvement for the fracture strength of commutator, and third, to be recognized to change into $6{\sigma}$ quality control in SY company.

• The Journal of Advanced Prosthodontics
• /
• 제7권1호
• /
• pp.76-84
• /
• 2015

This article reviews the topic of how to identify and develop a removable partial denture (RPD) path of placement, and provides a literature review of the concept of the RPD path of placement, also known as the path of insertion. An optimal RPD path of placement, guided by mutually parallel guide planes, ensures that the RPD flanges fit intimately over edentulous ridge structures and that the framework fits intimately with guide plane surfaces, which prevents food collecting empty spaces between the intaglio surface of the framework and intraoral surfaces, and ensures that RPD clasps engage adequate numbers of tooth undercuts to ensure RPD retention. The article covers topics such as the causes of obstructions to RPD intra-oral seating, the causes of food collecting empty spaces that may exist around an RPD, and how to identify if a guide plane is parallel with the projected RPD path of placement. The article presents a method of using a surgical operating microscope, or high magnification (6-8x or greater) binocular surgical loupes telescopes, combined with co-axial illumination, to identify a preliminary path of placement for an arch. This preliminary path of placement concept may help to guide a dentist or a dental laboratory technician when surveying a master cast of the arch to develop an RPD path of placement, or in verifying that intra-oral contouring has aligned teeth surfaces optimally with the RPD path of placement. In dentistry, a well-fitting RPD reduces long-term periodontal or structural damage to abutment teeth.

• 한국유체기계학회 논문집
• /
• 제3권4호
• /
• pp.30-37
• /
• 2000

Several reverse design methods are developed and applied to the suction or pressure surface for finding design values of blade geometry for a given axial turbine blade. Re-designed blade profiles using shape parameters are compared with measured blade data. Essential shape parameters for blade design are induced by the procedure of reverse design for best fitting. Characteristics of shape parameters are evaluated through the system design method and restriction conditions of structural stability or aerodynamic flow loss. Some of shape parameters i.e blade radius or exit blade angle etc., are classified to weakly adjustable shape parameters, otherwise strongly adjustable shape parameters which would be applied for controlling blade shape. Average deviation values between the measured data and re-designed blade using shape parameters are calculated for each design method. Comparing with the average deviation for a given blade geometry, minimum shape parameters required to design a blade geometry are obtained.

• ETRI Journal
• /
• 제38권2호
• /
• pp.337-346
• /
• 2016

We propose a data-driven kinematic control method for a robotic spatial augmented reality (RSAR) system. We assume a scenario where a robotic device and a projector-camera unit (PCU) are assembled in an ad hoc manner with loose kinematic specifications, which hinders the application of a conventional kinematic control method based on the exact link and joint specifications. In the proposed method, the kinematic relation between a PCU and joints is represented as a set of B-spline surfaces based on sample data rather than analytic or differential equations. The sampling process, which automatically records the values of joint angles and the corresponding external parameters of a PCU, is performed as an off-line process when an RSAR system is installed. In an on-line process, an external parameter of a PCU at a certain joint configuration, which is directly readable from motors, can be computed by evaluating the pre-built B-spline surfaces. We provide details of the proposed method and validate the model through a comparison with an analytic RSAR model with synthetic noises to simulate assembly errors.

• 상하수도학회지
• /
• 제25권3호
• /
• pp.359-366
• /
• 2011

The feasibility of using volcanic ash for lead ion removal from wastewater was evaluated. The adsorption experiments were carried out in batch tests using volcanic ash that was treated with either NaOH or HCl prior to the use. Volcanic ash dose, temperature and initial Pb(II) concentration were chosen as 3 operational variables for a $2^3$ factorial design. Ash dose and concentration were found to be significant factors affecting Pb(II) adsorption. The removal of Pb(II) was enhanced with increasing volcanic ash dose and with decreasing the initial Pb(II) concentration. Pb(II) adsorption on the volcanic ash surface was spontaneous reaction and favored at high temperatures. Calculation of Gibb's free energy indicated that the adsorption was endothermic reaction. The equilibrium parameters were determined by fitting the Langmuir and Freundlich isotherms, and Langmuir model better fitted to the data than Freundlich model. BTV(base-treated volcanic ash) showed the maximum adsorption capacity($Q_{max}$) of 47.39mg/g. A pseudo second-order kinetic model was fitted to the data and the calculated $q_e$ values from the kinetic model were found close to the values obtained from the equilibrium experiments. The results of this study provided useful information about the adsorption characteristics of volcanic ash for Pb(II) removal from aqueous solution.

• 상하수도학회지
• /
• 제32권5호
• /
• pp.381-388
• /
• 2018

Microbubbles oxygen transfer to water was simulated based on experimental results obtained from the bubbles generation operated under varying liquid supply velocity to the multi-step orifices of the generator. It had been known that liquid supply velocity and bubble size are inversely related. In the oxygen transfer, a non-steady state was assumed and the pseudo stagnation caused the slow movement of bubbles from the bottom to the water surface. Two parameters were considered for the simulation: They represent a factor to correct the pseudo stagnation state and a scale which represented the amount of bubbles in supply versus time. The sum of absolute error determined by fitting regression to the experimental results was comparable to that of the American Society of Civil Engineers (ASCE) model, which is based on concentration differential as the driving force. Hence, considering the bubbles formation factors, the simulation process has the potential to be easily used for applications by introducing two parameters in the assumptions. Compared with the ASCE model, the simulation method reproduced the experimental results well by detailed conditions.