• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.34 no.1
• /
• pp.12-16
• /
• 2012

Purpose: The purpose of this study is to evaluate the effect of exposure of hydroxyapatite coating on the amount of bone formation and stability in the dogs. Methods: In this study, hydroxyapatite coated implants (HAPTITE) was placed over the femur bone surface of four dogs about 1 mm. The experimental group was divided into 4 weeks group of 8 implants and 8 weeks group of 8 implants, and then they were sacrificed. The stability of implants was evaluated twice with Osstell$^{TM}$ mentor (Osstell AB, Goteborg, Sweden) at right after placement and sacrifice. The amount of bone formation was evaluated through histomorphometric examination. Results: The stability of implants was in normal range, and tended to increase as time goes by. Mean percentages of new bone formation rates were $90.5{\pm}6.6$ at uppermost 1 mm bone level adjacent to soft tissues (level 1) and $92.9{\pm}4.1$ at next 1 mm bone level (level 2) in 4 weeks group, $90.1{\pm}11.5$ at level 1 and $95.9{\pm}2.3$ at level 2 in 8 weeks group. Mean percentages of bone-implant contact rates were $85.1{\pm}10.8$ at level 1 and $88.1{\pm}13.8$ at level 2 in 4 weeks group, $88.5{\pm}14.4$ at level 1 and $95.3{\pm}3.1$ at level 2 in 8 weeks group. There was no statistically significant difference of new bone formation rate and bone-implant contact rate between uppermost 1 mm bone level adjacent to soft tissues and next 1 mm bone level. However, there was no significant difference in bone formation between 4 and 8 weeks groups. Conclusion: These results suggested that exposed hydroxyapatite coated implants to soft tissue showed favorable bone formation and implant stability.

• Journal of Bio-Environment Control
• /
• v.7 no.1
• /
• pp.71-77
• /
• 1998

The root-zone environment is an important factor to the plant growth and it is closely related to the thermal characteristics of the root media. In this study thermal characteristics of root media with ambient environmental conditions were analyzed. The temperatures of nutrient solution as well as inside air of culture bed were measured in Nutrient Film Technique(NFT) and Deep Flow Technique(DFT) systems, and also the temperatures of root media measured in aggregate culture systems , The temperature of nutrient solution of NFT system with as low as 3$\ell$/min of flow rate was 3$^{\circ}C$ higher than that with 5 $\ell$/min of flow rate in the daytime, and the temperature of inside air was 2$^{\circ}C$ higher at night. And the temperature of nutrient solution of DFT system with as low as 0.8 cm of water level was 1-2$^{\circ}C$ higher than that with 1 8 cm in the daytime, and the temperature of inside air was almost same at night. The root-zone temperatures in the perlite and rockwool granulate systems with film mulching were 3$^{\circ}C$ higher than those without film mulching in the daytime. However, the rockwool slab system with film mulching showed the same trend as rockwool granulate system, but relatively higher temperature than any other medium because of the exposure of media surface to the ambient air. Additionally the temperature below the plant was measured 3$^{\circ}C$ lower than that between plants.

• Journal of Wetlands Research
• /
• v.22 no.2
• /
• pp.161-170
• /
• 2020

Constructed wetlands (CWs) are widely used to solve water quality problems caused by diffuse pollution from agricultural areas; however, phytoplankton blooms in CW systems can occur due to long hydraulic retention time (HRT), high nutrient loading, and exposure to sunlight. This study was conducted to evaluate the efficiency of a CW designed to treat agricultural diffuse pollution and develop a design concept to improve the nature-based capabilities of the system. Monitoring was conducted to assess contribution of individual wetland components (i.e. water, sediments, and plants) in the treatment performance of the system. During dry days, the turbidity and particulates concentration in the CW increased by 80 to 197% and 10 to 87%, respectively, due to the excessive growth of phytoplankton. On storm events, the concentration of particulates, organics, and nutrients were reduced by 43% to 70%, 22% to 49%, and 15% to 69% due to adequate water circulation and constant flushing of pollutants in the system. Based on the results, adequate water circulation is necessary to improve the performance of the CW. Free water surface CWs are usually designed to have a constant water level; however, the climate in South Korea is characterized by distinct dry and rainy seasons, which may not be suitable for this conventional design. This study presented a concept of multifunctional design in order to solve current CW design problems and improve the flood control, water quality management, and environmental functions of the facility.

• Journal of Korean Society of Forest Science
• /
• v.82 no.4
• /
• pp.337-346
• /
• 1993

Experiments were performed to find out the effects of simulated acid rain(SAR) of pH 4.0 or pH 2.5 for 12 weeks on stomatal resistance, wettability and anatomical changes in Quercus acutissima and Ginkgo biloba seedlings. As a control, distilled water with a pH 6.5 was also sprayed. Stomatal resistance of Q. acutissima and of G. biloba remarkably increased after exposure to SAR. SAR increased the wettability of Q. acutissima leaves measured with water blue solution and of G. biloba leaves measured by leaf contact angle method. Anatomical changes in the leaves of Q. acutissima affected by SAR were the partial damage of epidermis and parenchymatous cells. Scanning electron microscopical observation showed that the number of trichomes in the leaves of Q. acutissima treated with SAR markedly decreased and the erosion of epicuticular wax was significant. No distinct damage was found in the G. biloba leaves at pH 4.0, while epidermis and vascular tissue were collapsed at pH 2.5. No significant alteration of surface structures in this tree species was observed.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.19 no.1
• /
• pp.120-127
• /
• 2015

The purpose of this study is to improve the fire prevention performance using the fire venetian blind louver subjected to burning by fire flame. The investigation is based on testing 2 full scale specimens, which is $3m{\times}3m$ module, $850mm{\times}1,500mm$ open, and $900mm{\times}900mm{\times}175mm$ venetian blind louver. Two louver thickness (1.5 and 2.0mm) were adopted. The specimens were exposed to fire flame temperature levels of ISO834 at the lower surface of the fire venetian blind louver specimens with exposure duration of one hour in Korea Institute of Construction Technology (KICT). It was found from the test results that the values of distributed temperature, decreased for all specimens for protecting to fire flame by venetian blind louver. The results of tests were a good fire prevention performance between in initial to 6 mins. At 60 minutes around ISO 834 fire loading, the percentages of distributed temperature in 500mm and 800mm height ranged between 11 and 10% respectively, regardless of louver thickness. This study, therefore, will improve the fire venetian blind louver for fire protection and prevention performance.

• Journal of Periodontal and Implant Science
• /
• v.29 no.4
• /
• pp.821-838
• /
• 1999

On the basis of the evidences that electrical stimulation could enhance proliferation and differentiation of bone cells and promote healing and regeneration of bone, this study was performed to investigate the effects of electrical stimulation on human periodontal ligament cells and gingival fibroblasts in vitro, which also have important roles in regeneration of periodontium, and to evaluate the potential of clinical application of electrical stimulation. Human periodontal ligament cells and gingival fibroblasts were primarily cultured from the root surface of extracted premolar and the adjacent gingiva without periodontal diseases. In control group, the cells ($5{\times}10^4$ cells/ml)were incubated only in Dulbecco's Modified Eagle's Medium contained with 10% fetal bovine serum. In test groups, electrical stimulation was given at the current intensity of $0.25{\mu]A$(test group 1), $1.0{\mu}A$(test group 2), and $2.5{\mu}A$(test group 3) for 12 hours to the same culture media with the control group. After 12 hour exposure of electrical stimulation, the cells were incubated for 2 and a half days(60 hours), and then each group of cells was analyzed for cell proliferation, protein level, and activity of alkaline phosphatase. The results were as follows ; 1. The Rate of cell proliferation of every test group increased significantly in both periodontal ligament cells and gingival fibroblasts, and in periodontal ligament cells, test group 3 showed significantly increased proliferation compared to the other test groups(p<0.05). 2. In the protein levels, neither periodontal ligament cell nor gingival fibroblast showed statistically significant differences between control and test groups. 3. The activity of alkaline phosphatase in periodontal ligament cells increased significantly in all test groups(p<0.05), but there were no significant differences between 3 test groups. In gingival fibroblasts, the activity of alkaline phosphatase increased significantly only in test group 3(p<0.05). From the above results, it is concluded that electrical stimulation may have beneficial effects on the regeneration of destructed periodontal tissue in regard of the stimulation of periodontal ligament cells and gingival fibroblasts as well as electrically stimulated bone formation that has been known, and that electrical stimulation may have the potential of clinical application.

• Journal of Periodontal and Implant Science
• /
• v.29 no.4
• /
• pp.803-823
• /
• 1999

In order to reveal immunopathogenesis of periodontal tissue destruction, it is important to clarify the molecular mechanism of trafficking and retention of activated leukocytes, including monocytes/macrophages. Gingival fibroblasts may be involved in the regulation of inflammatory cell accumulation in the extravascular periodontal connective tissues via cytokine production and surface expression of adhesion molecules. In this study, it was investigated the molecular basis for the adhesive interactions between monocytes and fibroblasts such as peri-odontal ligament fibroblast(PDLF), human gingival fibroblast(HGF), and human dermal fibroblast(HDF). First, it was examined the evidence whether monocyte-fibroblast cell contact may cause signal transduction in fibroblasts. Being directly in contact with fixed human monocyte cell line THP-1, or U937, upregulation of IL-6 production, $TNF-{\alpha}$ mRNA expression and increased cell proliferation could be seen for fibroblasts. IL-6 production induced by monocyte- fibroblast coculture were further increased when fibroblasts had been pretreated with $IFN-{\gamma}$ or $IL-1{\beta}$ , and monocytes with LPS. Next, it was examined the expression of ICAM-1 which has been known to be involved in accumulation and activation of leukocytes in inflammatory diseases such as periodontitis. ICAM-1 was upregulated up to 10-fold on PDLF, HGF, and HDF by exposure to $IFN-{\gamma}$ or $IL-1{\beta}$. Furthermore, anti-ICAM-1 monoclonal antibody clearly blocked cocultureinduced IL-6 production by fibroblasts, suggesting that $ICAM-1/{\beta}_2$integrin pathway is involved in periodontal fibroblastmonocyte interaction. Overall, these findings provide evidence that periodontal fibroblasts could be involved in the accumulation and retention of monocytes/macrophages in periodontal inflammatory lesion at least in part by ICAM-1 expression. In addition, periodontal fibroblast-monocyte interaction could cause activation signals in fibroblasts intracellularly which result in cytokine production and cell proliferation. Thus, periodontal fibroblasts are speculated to play an important role in immunoregulation and tissue destruction in chronic periodontal diseases by interaction with monocytes/macrophages.

• Journal of Korean Society of Environmental Engineers
• /
• v.35 no.9
• /
• pp.630-635
• /
• 2013

There is a need to establish systematic procedure of groundwater quality standards, however, there were no specified basis for establishing substances and values in Korean groundwater quality standards for non-drinking water. In this study, we reviewed basis for deriving groundwater quality standard in the developed countries, considering carcinogenic and non-carciongenic risk via inhalation and dermal contact exposure pathways. Also, we reviewed the prior systematic procedure of standards related to water quality (e.g. drinking water, surface water, and wastewater). USEPA RAGS, ASTM RBCA, and Massachusettes presented the formulas for deriving groundwater concentrations of chemicals and there were similarity and differences. We suggests systematic procedure of groundwater quality standards, as follows. (1) Selection of groundwater pollutants population, (2) Possibility of risk assessment, (3) Selection of monitoring priority substances, (4) Monitoring, (5) Risk assessment, (6) Selection of groundwater quality standard candidates, (7) Selection of new substances and values for groundwater quality standards. Especially, groundwater concentration of hazardous material were presented according to revised risk formulas via inhalation and dermal contact.

• Journal of the Korean Society of Radiology
• /
• v.11 no.3
• /
• pp.161-169
• /
• 2017

The cone beam computed tomography(CBCT) which can acquire 3-dimensions images is widely used for confirmation of patient position before radiation therapy. In this study, through the simulation using the Monte Carlo technique, we will analyze the exposure dose by cone beam computed tomography and present the standardized data. For the experiment, MCNPX(ver. 2.5.0) was used and the photon beam spectrum was analyzed after Cone beam was simulated. As a result of analyzing the photon beam spectrum, the average energy ranged from 25.7 to 37.6 keV at the tube voltage of 80 ~ 120 kVp and the characteristic X-ray energy was 9, 60, 68 and 70 keV. As a result of using the water phantom, the percentage depth dose was measured, and the maximum dose appeared on the surface and decreased with depth. The absorbed dose also decreased as the depth increased. The absorbed dose of the whole phantom was 9.7 ~ 18.7 mGy. This is a dose which accounts for 0.2% of about 10 Gy, which is generally used for radiation therapy per week, which is not expected to have a significant effect on the treatment effect. However, it should not be overlooked even if it is small compared with prescription dose.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.35 no.4
• /
• pp.268-274
• /
• 2015

Weld overlay was first used in power plants in the US in the early 1980s as an interim method of repairing the welds of flawed piping joints. Weld overlaid piping joints in nuclear power plants must be examined periodically using ultrasonic examination technology. Portable phased array ultrasonic technology has recently become available. Currently, the application of preemptive weld overlays as a mitigation technique and/as a method to improve the examination surface condition for more complex configurations is becoming more common. These complex geometries may require several focused conventional transducers for adequate inspection of the overlay, the original weld, and the base material. Alternatively, Phased array ultrasonic probes can be used to generate several inspection angles simultaneously at various focal depths to provide better and faster coverage than that possible by conventional methods. Thus, this technology can increase the speed of examinations, save costs, and reduce radiation exposure. In this paper, we explain the general sequence of the inspection of weld overlay and the results of signal analysis for some PAUT (phased array ultrasonic testing) signals detected in on-site inspections.