• 제목/요약/키워드: surface debris

검색결과 292건 처리시간 0.03초

지상 LiDAR를 이용한 토석류 발생에 의한 침식, 퇴적량 측정 (Analysis of Erosion and Deposition by Debris-flow with LiDAR)

  • 전병희;장창덕;김남균
    • 한국지리정보학회지
    • /
    • 제13권2호
    • /
    • pp.54-63
    • /
    • 2010
  • 2009년 7월 9일부터 14일까지 누적강우 455mm의 집중호우에 의해 제천시 일대에 다수의 토석류 사태가 발생하였다. 토석류 발생에 따른 지형변화를 분석하기 위하여 수치지도와 라이다(LiDAR) 자료를 이용하여 고해상도의 수치고도모델(DEM)을 생성하였다. 라이다측량을 위해서 고해상도의 디지털 카메라와 GPS가 탑재된 3차원 스캐너 시스템 (RIEGLE LMS-Z390i)을 이용하였다. 라이다 스캐닝에 의해 생성된 포인트 자료는 클리핑과 필터링 작업을 거친 후 수치지도에 중첩시켜 토석류 발생 후의 지형의 DEM을 생성한다. 이렇게 토석류 발생 전후의 DEM 비교결과, 토석류 발생에 의한 침식과 퇴적량은 각각 $17,586m^3$, $7,520m^3$으로 평가되었다. 이러한 고해상도 지상라이다시스템을 이용하여 지형변화 관측을 통해 장래 토석류 모델 연구에 기여할 수 있을 것으로 판단되었다.

Evaluation of the effects of two novel irrigants on intraradicular dentine erosion, debris and smear layer removal

  • Gorduysus, Melahat;Kucukkaya, Selen;Bayramgil, Nursel Pekel;Gorduysus, Mehmet Omer
    • Restorative Dentistry and Endodontics
    • /
    • 제40권3호
    • /
    • pp.216-222
    • /
    • 2015
  • Objectives: To evaluate the effects of copolymer of acrylic acid and maleic acid (Poly[AA-co-MA]) and calcium hypochlorite ($Ca(OCl)_2$) on root canal dentin using scanning electron microscope (SEM). Materials and Methods: Twenty-four single-rooted teeth were instrumented and the apical and coronal thirds of each root were removed, leaving the 5 mm middle thirds, which were then separated into two pieces longitudinally. The specimens were randomly divided into six groups and subjected to each irrigant for 5 min as follows: G1, $Ca(OCl)_2$; G2, Poly(AA-co-MA); G3, $Ca(OCl)_2$ + Poly(AA-co-MA); G4, sodium hypochlorite (NaOCl); G5, ethylenediaminetetraacetic acid (EDTA); G6, NaOCl+EDTA. The specimens were prepared for SEM evaluation. Smear layer, debris and erosion scores were recorded by two blinded examiners. One image from G3 was analyzed with energy dispersive spectroscopy (EDS) on suspicion of precipitate formation. Data were analyzed using the Kruskal-Wallis and Dunn tests. Results: G1 and G4 showed the presence of debris and smear layer and they were statistically different from G2, G3, G5 and G6 where debris and smear layer were totally removed (p < 0.05). In G1 and G4, erosion evaluation could not be done because of debris and smear layer. G2, G3 and G5 showed no erosion, and there was no significant difference between them. G6 showed severe erosion and was statistically different from G2, G3 and G5 (p < 0.05). EDS microanalysis showed the presence of Na, P, and Ca elements on the surface. Conclusions: Poly(AA-co-MA) is effective in removing the smear layer and debris without causing erosion either alone or with $Ca(OCl)_2$.

하드디스크의 표면 파손 기구에 관한 고찰 (Surface Damage Mechanism of Hard Disk)

  • 정구현;김대은;김상국
    • 한국정밀공학회:학술대회논문집
    • /
    • 한국정밀공학회 1996년도 추계학술대회 논문집
    • /
    • pp.716-720
    • /
    • 1996
  • In this work the surface damage mechanism of hard disk was investigated. Experiments were peformed to simulate the contact during start and stop. Evidence of significant surface damage appeared after 20,000 cycles. It was found that despite higher hardness, the slider showed more signs of damage than the disk. Optical microscopy showed that the surface was damaged by abrasive action as well as adhesion of wear debris.

  • PDF

Preliminary Studies on the Relationship between Reed and Bacterial Communities in the Salt Marsh Environment of Namyang Bay, Korea

  • Kwon, Kae-Kyoung;Je, Jong-Geel
    • Ocean and Polar Research
    • /
    • 제24권1호
    • /
    • pp.47-53
    • /
    • 2002
  • To evaluate the effect of reed population on the distribution and activities of microorganisms, vertical distribution of heterotrophic bacteria, degradation rate of cellulose, extracellular aminopeptidase activity (APA) and metabolic diversity based on GN2 Microlog plate were measured at two salt marsh stations in Hogok-ri, Namyang Bay, west coast of Korea. The number of heterotrophic bacteria at station 1 (reed population inhabited area) showed 2 to 6 times higher than that of station 2 (exposed area) with exception in the surface layer. Cellulose degradation rates in station 1 showed more than 50%. month-I and higher than that of station 2 (10.2 to 38.4%. $month^{-1}$). Yet the APA at two stations did not show difference except surface layer and suggested that APA might not be a significant factor in degrading marsh plant debris. Lipid class compounds, cell wall polymers and L-alanine were widely used by microorganisms. The number and activities of bacterial populations especially concerned in plant debris degradation seemed to be stimulated by the reed communities.

쓰레기 수거용 무인 수상로봇 (Unmanned Surface Vehicle for Collecting Marine Debris)

  • 오명훈;김재형;김현민;신동아;김동헌
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2015년도 제46회 하계학술대회
    • /
    • pp.61-62
    • /
    • 2015
  • This study presents a movable USV (Unmanned Surface Vehicle) based on Micro Controller. Recently, Micro Controller has widely used in application programming such as industry and education application. In particular, Robot is capable of collecting Marine Debris in any sea area is needed so We propose USV used IP camera for automatic driving, distance detection to control movement of USV in order to prevent of collision based on Arduino. Also, Surrounding situation taken by IP camera can be transmitted to monitor and smartphone.

  • PDF

SEM 관찰에 의한 세라믹의 구름마모기구 (Rolling Wear Mechanism of Ceramics by SEM Observation)

  • Kim, Seock-Sam;Kato, Kohji;Hokkirigawa, Kazuo
    • Tribology and Lubricants
    • /
    • 제5권1호
    • /
    • pp.36-43
    • /
    • 1989
  • Scanning electron microscopic observations were carried out on the worn surface and the wear debris of ceramic materials to investigate the wear mechanism of those in dry rolling contact. It was found from the scanning electron microscopic observations that the wear in ceramic materials is related to brittle fracture and has two types of wear mechanisms, small scale wear and larvae scare wear. Plate-like wear debris were created from the initial surface cracks and defects. The small scale wear was related to real contact area and large scale wear was related to HertzJan contact area. A wear model was proposed on the basis of scanning electron microscopic observations.

낙동강 유출 부유쓰레기의 거동 특성 (Behavior Characteristics of Floating Debris Spilled from the Nakdong River)

  • 장선웅;김대현;정용현;윤홍주
    • 대한원격탐사학회지
    • /
    • 제30권1호
    • /
    • pp.127-136
    • /
    • 2014
  • 낙동강은 하구의 수문 개방 시 연간 수천 톤의 쓰레기가 남해로 유입되어 인근 연안을 이동하며 사회 경제적 피해를 유발하고 있다. 이에 본 연구에서 낙동강 유출 부유쓰레기의 거동 특성을 파악하기 위해 2012년 장마, 태풍 내습 시를 대상으로 피해지로 추정되는 거제도 북동측 해안 1개소에 대한 조사와 부이를 활용한 이동 경로 추적 시험을 수행하였다. 또한, 해양기상 환경에 대한 분석을 통해 부유쓰레기의 이동과 관련된 흐름을 파악하였다. 연구 결과 장마 시기인 7월 16일 초목류를 비롯한 총 40톤 정도의 쓰레기가 흥남해수욕장으로 유입되었다. 또한 9월 14일 태풍 '산바' 내습 시기에 투하된 위치 추적 부이는 가덕도 남쪽 해상을 지나 1 ~ 2일 후 거제도 해안가로 유입되는 결과를 보여주었다. 부유쓰레기와 위치 추적 부이가 거제도 북동측 해안가로 유입될 당시 거제 해역에서 북동풍계열의 풍향이 지배적이었으며 연안으로 유입되는 공통적인 해수 표층 흐름이 나타났다.

주철의 마모특성에 미치는 미세조직의 영향 (Effects of the Microstructures on the Wear Characteristics of Cast irons)

  • 김석원;박진성;이형철;김기곤
    • 한국주조공학회지
    • /
    • 제24권6호
    • /
    • pp.323-330
    • /
    • 2004
  • This study aims to investigate on the effects of the microstructures on the wear characteristics of the different grey cast iron(GC) and spheroidal ductile cast iron(DCI). Wear test using wear tester of pin-on-disc type was carried out under the conditions of load 47.2N , velocity 0.2m/s, distance 4000m. At the GC, Wear rates depend on graphite type and oxide layer formed at wear surface. Weak rosette graphites are easily broken and formed wear debris over 30 ${\mu}m$. This wear debris occurs scuffing at wear surface. As a result of surface deformation, Narrow regions of the matrix between the graphite flakes and the contact surface lead to the failure of the necks. Wear rate for the DCI depended on hardness of matrix more than size of graphite.

양극산화 제어에 의한 TiO2 나노튜브의 광전기화학 특성 (Photoelectrochemical Properties of TiO2 Nanotubes by Well-Controlled Anodization Process)

  • 정다솔;김동현;정현성
    • 한국표면공학회지
    • /
    • 제52권6호
    • /
    • pp.298-305
    • /
    • 2019
  • We investigated a correlation between morphology and photoelectrochemical properties of TiO2 nanotubes fabricated by well-controlled anodization processes. Anodization in an ethylene-glycol-based electrolyte solution accelerated the rapid grow rate of TiO2 nanotubes, but also cause problems such as delamination at the interface between TiO2 nanotubes and a Ti substrate, and debris on the top of the nanotube. The applied voltages for the anodization of TiO2 were adjusted to avoid the interface delamination. The heat treatment and the anodizing time were also controlled to enhance the crystallinity of the as-prepared TiO2 nanotubes and to increase the surface area with the varied length of the anodized TiO2 nanotubes. Additionally, a 2-step anodization process was utilized to remove the debris on the tube top. The photoelectrochemical properties of TiO2 nanotubes prepared with the carefully tailored conditions were investigated. By removing the debris on TiO2 nanotubes, applied bias photon-to-current efficiency (ABPE) of TiO2 nanotubes increased up to 0.33%.

낙석방지벽에 작용하는 토압의 특성에 대한 실험적 연구 (An Experimental Study on the Characteristics of Earth Pressure to a Debris-fall Prevention Wall)

  • 윤남식;박용원;박명수;최이진
    • 한국도로학회논문집
    • /
    • 제10권1호
    • /
    • pp.41-48
    • /
    • 2008
  • 이 논문은 가파른 경사면 전면에 시공되는 낙석방지벽에 작용하는 토압의 특성에 대한 내용을 다룬다. 낙석방지벽 배면되메움 공간은 주동상태의 흙쐐기가 완전히 형성될 만큼의 공간이 없고, 토압의 특성은 벽체의 이동과 벽체와 절취사면 사이의 좁은 간격에서 발생하는 아칭 효과의 영향을 크게 받기 때문에 해석적으로 신뢰성 있는 규명이 되지 않고 있다. 연구는 실내에서 축소모형에 대한 원심력시험을 통하여 수행되었다. 연구결과는 낙석방지공 배면토압이 지반의 경사각과 벽체이동에 크게 영향 받음을 보여주었다 벽체상반부에서는 벽체이동에 의한 토압감소가. 하반부에서는 아칭 효과가 뚜렷하게 나타남을 보였다. 이 연구결과에 의하면 낙석방지벽 설계에서 벽체에 작용하는 토압은 지반경사와 공사중 또는 완공후의 벽체 이동조건을 고려하여야 함을 알 수 있었다.

  • PDF