• 한국산학기술학회논문지
• /
• 제21권6호
• /
• pp.490-497
• /
• 2020

국내 아스팔트 포장 도로는 전체 포장의 약 90%이상을 차지하고 있으며, 건설구조물 중에서는 가장 광범위하게 시공되어지고 있다. 아스팔트 포장의 열전달 특성은 도심지 열섬효과(Heat island effect)에 원인이 되고 있으며, 높은 아스팔트 표면 온도 증가로 인해 파손에 원인이 되고 있다. 이처럼 본 연구에서는 열 변화에 민감한 포장 재료인 아스팔트 혼합물에 태양열 에너지 누적에 따른 열전달 특성 인자를 평가하였다. 평가한 아스팔트 혼합물은 3종류로 밀입도인 WC-2와 배수성 입도인 PA-13, 순환골재를 적용한 WC-2 입도에 대해서 열전달 특성인자(열전도도, 비열용량, 열확산율)와 열에너지 누적에 따른 열전도도변화를 평가하였다. 해당 연구에서 진행한 열누적에 따른 열전도도 실험과 HFM실험 비교 결과, 1.2~2.0배의 차이를 나타냈다. 이는 아스팔트혼합물이 열에너지 누적에 따라 열전도도가 변화한다는 것을 의미한다. 실험결과를 이용하여 아스팔트 혼합물의 표면온도와 입도에 따른 열전도도의 상관관계를 분석하였으며, WC-2 입도의 경우 로그형태의 상관관계를 PA-13의 입도의 경우 선형상관관계를 나타내고 있다. 향후 이러한 열전달 특성 인자는 열에너지에 의한 아스팔트 혼합물의 파손평가 및 모형 개발 연구에 활용 가능한 선행연구가 될 것이라 판단된다.

• Ocean and Polar Research
• /
• 제24권4호
• /
• pp.331-343
• /
• 2002

The southern tidal flat of Kanghwa Island with an area of approximately $90km^2$ is one of the biggest flats on the west coast of Korea. Surface sediments for sedimentary analyses were sampled at 83 stations in August 1997, September 1999 and August 2000. The very poorly-sorted mud sediments were predominant in the eastern part of the tidal flat, whereas the poorly-sorted sand-mud mixed sediments were dominant in the western part. The area of muddy sediment distribution diminished, but that of sandy mud sediment extended to southeastward tidal flat for three years. In the western part of tidal flat, deposition occurred during the period of spring to summer, whereas erosion occurred in winter. Sediment accumulation rates during three years indicated that the sediments deposited continuously in the eastern part of tidal flat, whereas eroded in the western part of tidal flat. Recently, construction of artificial structures such as new airport, island-connecting bridges and dikes near the tidal flat might change tidal current and river flow pattern. In order to reduce the ecological damage and to preserve tidal-flat environment, it is necessary to Investigate long-term impacts on sedimentary environment and ecology.

• 한국환경복원기술학회지
• /
• 제21권4호
• /
• pp.1-10
• /
• 2018

Use of de-icing salts results in accumulation of high concentrations of ions on roadside soils and tree. The purpose of this study isto determine translocation of seasonal impact of exchangeable cations originating from de-icing salt on roadside surface soil-plant influenced by the intensity of foliar damage (NY = 0-25%, SY = 26-50%, CY = 51-75%) of trees. This paper investigated the concentration of four exchangeable cations ($K^+$, $Ca^{2+}$, $Na^+$, and $Mg^{2+}$) on the roadside surface soil. The tree (Ginko biloba) samples were collected from the Konkuk and Judeok intersections in Chung-ju city. The sequential extraction procedure was applied to 120 soil samples of the soilsurface and 30 tree samples. Four cation exchange ions were determined by ICP-OES. The content of four exchangeable cations present on roadside soil was found to be the lowest in NY but highest in CY from tree pits in the order of NY < SY < CY. Especially, the results were apparent during spring time compared to other seasons. Soil collected from tree pits had the highest concentration of $Ca^{2+}$ possibly due to a higher volume of traffic on those streetsresulting in splashing of more calcium chloride ($CaCl_2$). The analysis of three exchangeable cations ($K^+$, $Mg^{2+}$, and $Na^+$) in the tree leaves revealed higher levels than roadside surface soil when foliar damage ratio increased in the order of NY < SY < CY in summer. In addition, a strong positive linear relationship was observed between the concentration of exchangeable cations in soil and trees. It is hypothesized that the results of this study can be a valuable baseline for managing de-icing salt on roadside soil and trees, in order to mitigate the salt stress that can damage the roadside soil and trees.

• 한국표면공학회지
• /
• 제55권6호
• /
• pp.353-362
• /
• 2022

Recently, transmittance of photomasks for ultra-violet (UV) region is getting more important, as the light source wavelength of an exposure process is shortened due to the demand for technologies about high integration and miniaturization of devices. Meanwhile, such problems can occur as damages or the reduction of yield of photomask as electrostatic damage (ESD) occurs in the weak parts due to the accumulation of static electricity and the electric charge on chromium metal layers which are light shielding layers, caused by the repeated contacts and the peeling off between the photomask and the substrate during the exposure process. Accordingly, there have been studies to improve transmittance and antistatic performance through various functional coatings on the photomask surface. In the present study, we manufactured antireflection films of Nb₂O₅, | SiO₂ structure and antistatic films of ITO designed on 100 × 100 × 3 mmt sodalime glass by DC magnetron sputtering system so that photomask can maintain high transmittance at I-line (365 nm). ITO thin film deposited using In/Sn (10 wt.%) on sodalime glass was optimized to be 10 nm-thick, 3.0 × 103 𝛺/☐ sheet resistance, and about 80% transmittance, which was relatively low transmittance because of the absorption properties of ITO thin film. High average transmittance of 91.45% was obtained from a double side antireflection and antistatic thin films structure of Nb₂O₅ 64 nm | SiO₂ 41 nm | sodalime glass | ITO 10 nm | Nb₂O₅ 64 nm | SiO₂ 41 nm.

• 조명전기설비학회논문지
• /
• 제24권4호
• /
• pp.149-155
• /
• 2010

본 연구는 터널구간 내 설치된 각종 애자류의 오염도를 평가하여 각 터널구간마다 세정주기를 마련하기 위해 연구를 수행하였다. 세정주기는 전국의 각 지역을 대상으로 공해, 산업단지, 염해지역을 샘플링하여 애자류에 부착된 오염도에 의해 평가되었다. 그 결과, 오염물의 증가에 의해 포집량과 도전율은 증가하였고, 각 터널마다 그 값은 서로 다르게 나타났다. 특히, 공해 및 염해가 심한 지역은 도전율이 높게 나타났으며, 주기적인 세정계획을 수립하여 관리하는 것이 사고를 미연에 방지할 수 있을 것으로 판단된다. 또한 기존에 애자 표면에 도포하는 절연그리스는 사용을 자제하는 것이 장기적으로 사고를 방지할 수 있을 것으로 판단된다.

• 한국안전학회지
• /
• 제20권3호
• /
• pp.42-46
• /
• 2005

The static electricity by thinner flow and discharge energy is investigated experimentally for the purpose of preventing the electrostatic discharge and damage. Test system for evaluating streaming electrification consists of a teflon pipe, a reservoir tank a pump, flowmeters and an electrometer. When dielectric liquid flows through a pipe from one vessel to another, the potential difference generated in the collecting vessel is due to the accumulation of charges. These charges result from the convection of a part of the electrical double layer existing in the tube at the contact between the liquid and the inner wall. When the fluid velocity increases, the electric current increases proportionally. The charging current and accumulated charges by streaming electrification at the thinner velocity of 40cm/s are measured a range of 5 nA and $0.27{\mu}C$ respectively. This amount of static discharge energy generated by streaming electrification is enough to ignite flammable solvent. Therefore surface electric potential should decrease by using electrostatic shielding and ground.

• Applied Microscopy
• /
• 제31권1호
• /
• pp.37-47
• /
• 2001

화상에 의한 피부 손상이 간에 미치는 영향을 알아보기 위하여 흰쥐를 이용하여 피부 화상을 유도한 다음 각각 5시간, 24시간 후 생화학적 정량법과 형태학적 관찰을 통해 간 조직 손상의 발병기전을 검토해 보고자 하였다. 흰쥐의 화상 유발은 등쪽면의 털을 깎고(total burn surface area $20\sim25%$) $100^{\circ}C$ 물로 10초간 흡입손상 없이 피부 화상만을 가하였다. 생화학적 정량으로는 혈청 내 xanthine oxidase(XO)와 aniline aminotransferase (ALT)의 활성변화, 그리고 혈장 단백질 함량 변화를 측정하였고, 형태학적 관찰은 혈액 중 다형핵 백혈구 수의 산정과 간 세포의 미세구조 변화를 관찰하였다. 실험 결과, 화상 후 혈청 내 XO의 활성 증가(P<0.01)와 함께 체중 당 간 무게(p<0.05)와 혈청 내 ALT의 활성이 증가되었다. 화상 직후 allopurinol의 복강투여로 XO활성, 간 무게, 그리고 ALT의 활성은 모두 감소되었다. 화상 손상에 의한 간 조직의 미세구조적 변화로는 소포체 종창, 리보솜 탈락, 지방소적의 축적, 그리고 담모세관과 세포간질의 확장이 관찰되었다. 뿐만 아니라 염증세포인 호중구의 침윤과 함께 혈관 내피세포의 손상, 쿠퍼세포의 활성화, 그리고 미세융모의 손상들이 관찰되었다. 또한 혈 중 다형핵 백혈구의 수적인 변화에서 화상 유발 5시간 후에 현저히 감소되어 내부 장기에 호중구 침윤의 가능성을 알 수 있었다. 하지만 allopurinol의 투여로 이러한 미세구조의 변화를 예방할 수 있는 것으로 나타났다. 이러한 결과들을 종합해 볼 때, 피부 화상으로부터 간 손상을 유발하는데 있어서 혈 중 XO의 활성증가가 매우 핵심적인 역할을 담당하는 것으로 사료되었다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.178-178
• /
• 2016

Every display is equipped with a cover glass to protect the underneath displaying devices from mechanical and environmental impact during its use. The strengthened glass such as Gorilla glass.$^{TM}$ has been exclusively adopted as a cover glass in many displays. Conventionally, the strengthened glass has been manufactured via ion-exchange process in wet salt bath at high temperature of around $500^{\circ}C$ for hours of treatment time. During ion-exchange process, Na ions with smaller diameter are substituted with larger-diameter K ions, resulting in high compressive stress in near-surface region and making the treated glass very resistant to scratch or impact during its use. In this study, PIIID (plasma immersion ion implantation and deposition) technique was used to implant metal ions into the glass surface for strengthening. In addition, due to the plasmonic effect of the implanted metal ions, the metal-ion implanted glass samples got colored. To implant metal ions, plasma immersion ion implantation technique combined with HiPIMS method was adopted. The HiPIMS pulse voltage of up to 1.4 kV was applied to the 3" magnetron sputtering targets (Cu, Ag, Au, Al). At the same time, the sample stage with glass samples was synchronously pulse-biased via -50 kV high voltage pulse modulator. The frequency and pulse width of 100 Hz and 15 usec, respectively, were used during metal ion implantation. In addition, nitrogen ions were implanted to study the strengthening effect of gas ion implantation. The mechanical and optical properties of implanted glass samples were investigated using micro-hardness tester and UV-Vis spectrometer. The implanted ion distribution and the chemical states along depth was studied with XPS (X-ray photo-electron spectroscopy). A cross-sectional TEM study was also conducted to investigate the nature of implanted metal ions. The ion-implanted glass samples showed increased hardness of ~1.5 times at short implantation times. However, with increasing the implantation time, the surface hardness was decreased due to the accumulation of implantation damage.

• Journal of Periodontal and Implant Science
• /
• 제30권2호
• /
• pp.455-472
• /
• 2000

Instrumentation for periodontal therapy may induce marginal damage which increases plaque accumulation and result in periodontal disease. But there have not been many reports of instrumentations on the artificial crown so far. Therefore this study is conducted to evaluate the effects of various repeated instrumentations on the porcelain crown marginal portion. Of the 10 extracted periodontally diseased maxillary first premolars, were 12 proximal surface used in this study. The finishing line of the preparation was placed on the root surface below CEJ and then the crown was cast and cemented in usual manner. Every 4 surfaces of the 3 instruments-curet, ultrasonic scaler, and ultrasonic curet- is used. and four samples used in each instruments. The relevant procedures and measurements were repeated 3 times in each surfaces. Marginal gap is measured by the microscope and surface roughness, Scannig Probe Microscope. Measurements are made at 5 points in each surfaces, making 20 points in each instrument. The results evaluated statistically were as follows 1. As instrumentation was repeated, both marginal gap and roughness were increased in all group 2. In the hand curet, marginal gap was increased every instrumentation and roughness was increased after second. 3. In the ultrasonic scaler, both marginal gap and roughness were increased every instrumentation. 4. In the ultrasonic curet, marginal gap was increased after third instrumentation and roughness was increased after second. 5. Marginal gap and roughness used by the ultrasonic curet were lower than the others and no difference was seen between the hand curet and ultrasonic scaler From the results of this study, the ultrasonic curet was useful in some aspect, but careful instrumentation was needed. Furthermore it was important to minimize the instrumentation through complete periodontal therapy before setting and adequate plaque control.

• 대한기계학회논문집A
• /
• 제26권11호
• /
• pp.2219-2227
• /
• 2002

In a nuclear power plant, reactor pressure vessel (RPV) is the primary pressure boundary component that must be protected against failure. The neutron irradiation on RPV in the beltline region, however, tends to cause localized damage accumulation, leading to crack initiation and propagation which raises RPV integrity issues. The objective of this paper is to estimate the integrity of RPV under hot leg leaking accident by applying the finite element analysis. In this paper, a parametric study was performed for various crack configurations based on 3-dimensional finite element models. The crack configuration, the crack orientation, the crack aspect ratio and the clad thickness were considered in the parametric study. The effect of these parameters on the maximum allowable nil-ductility transition reference temperature ($(RT_{NDT})$) was investigated on the basis of finite element analyses.