• Bulletin of the Korean Chemical Society
• /
• 제34권10호
• /
• pp.3141-3142
• /
• 2013

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제53권12호
• /
• pp.596-600
• /
• 2004

In this study, the surface properties of PET film were analyzed after plasma surface treatment. After plasma treatment of surface roughness and XPS were evaluated to analyze the chemical property, while the surface potential decay and surface resistance rate was measured to analyze the electric관 characteristic. When plasma discharge treatment was conducted for less than 10 minutes, the electrical insulating property was improved by evaporation of low molecular weight materials and cleaning of surface. However, when the treatment was conducted for more than 10 minutes, the insulating property was decreased due to excessive discharge energy. Analyses of chemical characteristics showed that 10-minute treatment resulted in increase of C-O and O=C-O bonds. However, when treated for more than 10 minutes. they were relatively decreased.

• Korean Membrane Journal
• /
• 제4권1호
• /
• pp.12-19
• /
• 2002

Nanofiltration of aqueous dye solutions was carried out using polyamide (PA) nanofiltration (NF) composite membranes. The PA composite membranes were prepared by the interfacial polymerization of piperazine (PIP) and trimesoyl chloride (TMC) on the surface of microporous polysulfone (PSf) ultrafi1tration (UF) membranes. After characterization in terms of their permeation performance and surface ionic property, they were used for the separation of dye solutions such as Direct Red 75, 80, 81, and Direct Yellow 8 and 27. The separation conditions were varied to study the factors affecting on the permeation performance of the membranes: different concentrations of dye solutions, operating temperature and time, and flow rate of a feed solution. The surface property of the membrane, especially its ionic property, as a function of operating time was examined with a zeta-potentiometer and the relationship between the surface chemistry of the membrane and its permeation properties was also studied.

• 한국의류산업학회지
• /
• 제15권3호
• /
• pp.430-436
• /
• 2013

The purpose of this study investigates the effects of electron beam(EB) irradiation on the chemical and morphological properties of Hansan ramie fiber. Hansan ramie fibers were irradiated with electron beam doses of 0, 1, 3, 5 and 10kGy. The effect of electron beam irradiation on the chemical components of fibers as well as the surface chemical and morphological properties were investigated using chemical component analysis methods based on TAPPI standards, XPS, and SEM. The results indicate that the surface layers can be removed under suitable EB irradiation doses. Alcohol-benzene extraction and lignin content increases gradually with an increase in EB irradiation and reaching a maximum at an EB dose of 3kGy, and decreases at 10kGy. The surface chemical changes measured by XPS corresponded to the chemical composition analysis results. The C1 peak and the O/C ratio decreased with the removal of the multi-layer and primary layer by EB irradiation. The SEM images show the inter-fibrillar structure etched by EB irradiation up to 5kGy. At 10kGy, the surface structure of the ramie fiber shows highly aligned and distinctive striations in a longitudinal direction. The removal of these exterior layers of the fiber was confirmed by changes in surface morphology as observed in SEM images.

• 한국표면공학회지
• /
• 제30권6호
• /
• pp.382-390
• /
• 1997

Good appearance of insulation coating is required for non-oriented silicon steel sheets, The property is influenced by both the chemical composition of coating solution and the species of resin. The composition of inorganic-organic coating was studied to obtain good surface quality for non-oriented silicon steel. The greenish degree of coating surface depended on $Cr^{3+}$ content in the coating layer, which was satisfied when chromate content was more than 54.60 wt. %, in the coating solution. The homogeneous pattern and roughness of the coating surface depended on spreading property of the resin. Surface appearance of the coating could be improved by using resin with good spreading property at the chemical composition of chromate 59.00 wt.%.. resin 34.23wt.%, and etyhylene glycol 6.67 wt.% without colloidal sillica.

• 폴리머
• /
• 제32권4호
• /
• pp.397-402
• /
• 2008

과불소 에테르 화합물(PFPE)은 높은 접촉각 및 낮은 표면에너지, 우수한 윤활제 성질과 방오성의 특성을 가지고 있어 산업적으로 많은 관심을 받아왔다. 반면에, 합성단계의 복잡성과 위험성을 갖고 있어 많은 연구가 되어 오지 못했다. 본 연구에서는 과불소 폴리에테르 올리고머 형태의 새로운 실란화합물을 합성하고 $^{19}F$-NMR 및 $^1H$-NMR을 통하여 구조분석 하였다. 또한 코팅필름의 접촉각 및 흐름각, 내오염성 등 표면 특성을 조사하였다. 그 결과, 기존의 방오성 필름보다 낮은 흐름각과 우수한 내오염성의 특징을 보여 방오성 필름 코팅 제로서 산업적 가능성을 확인하였다.

• Corrosion Science and Technology
• /
• 제2권2호
• /
• pp.102-108
• /
• 2003

The surface treatments. Chrome/Manganese and Modified Chrome Pickle, that are treated to improve the anti-corrosion property which is needed to increased the probability of prototype product enabled the sand cast Magnesium test specimens to have better corrosion resistance than non-treated one. Sand cast Magnesium specimens which was treated only with chemical conversion coating had same corrosion resistance with the Steel specimens plated by Zinc, and the another one that had the finishing treatment(painting) worked on the chemical surface treatment had the corrosion resistance property to meet to FPO-3 requirement. We also investigated the multiple finishing system(chemical surface treatment + 3 coating) to test the severe condition that magnesium should to endure.

• Membrane and Water Treatment
• /
• 제9권5호
• /
• pp.317-325
• /
• 2018

Polyvinyl chloride (PVC) ultrafiltration (UF) membrane was modified by silica sol in the coagulation bath during non-solvent induced phase separation (NIPS) process. The effects of silica sol concentrations on the morphology, surface property, mechanical strength and separation property of PVC UF membranes were systematically investigated. PVC membranes were characterized by Fourier transform infrared spectroscopy (FTIR), energy dispersive spectroscopy (EDS), scanning electron microscopy (SEM), contact angle goniometry and tensile strength measurement. The results showed that silica had been successfully assembled on the surface of PVC UF membrane. With the increase of silica sol concentration in the coagulation bath, the morphologies of PVC UF membranes changed from cavity structure to finger-like pore structure and asymmetric cross-section structure. The hydrophilicity and permeability of PVC UF membranes were further evaluated. When silica sol concentration was 20 wt.%, the modified PVC membrane exhibited the highest hydrophilicity with a static contact angle of $36.5^{\circ}$ and permeability of $91.8(L{\cdot}m^{-2}{\cdot}h^{-1})$. The structure of self-assemble silica had significant impact on the surface property, morphology, mechanical strength and resultant separation performance of the PVC membranes.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 C
• /
• pp.1682-1684
• /
• 2004

In this study, the surface properties of PET film were analyzed after plasma surface treatment. After plasma treatment of surface roughness and XPS were evaluated to analyze the chemical property, while the surface potential decay and surface resistivity was measured to analyze the electrical characteristic. When plasma discharge treatment was conducted for less than 10 minutes, the electrical insulating property was found to be improved through evaporation of low molecular weight materials and cleaning of surface. However, when the treatment was conducted for more than 10 minutes, the insulating property was decreased due to excessive discharge energy. Analysis of chemical characteristics showed that 10-minute treatment resulted in increase of C-O and O=C-O. However, when treated for more than 10 minutes, they were relatively decreased.

• 대한화학회지
• /
• 제54권6호
• /
• pp.749-754
• /
• 2010

본 연구에서는 IR과 CR의 블렌딩을 통하여 물성 개선 및 내구 성능 개선을 목적으로 IR/CR의 비율을 다양하게 블렌딩하여 제조한 고무시료의 가교 특성, 물성 변화, Morphology의 변화 및 화학적 특성을 조사하였다. 한편으로 블렌딩 된 고무에 다양한 조건으로 염소 표면처리를 하였을 때 고무시료의 Morphology를 관찰하고 마찰 시험을 통해 염소의 표면처리가 마찰계수에 미치는 영향을 조사하였다. 고무의 가교특성에서는 CR의 함량이 증가할수록 가교 속도가 감소하였으나 가교밀도는 일정하였고,경도, 모듈러스가 증가하였는데 이것은 가교특성의 변화와 밀접한 관계가 있으며, 가교 반응의 활성화에 의한 결정화 영향으로 기계적 강도가 증가하는 것으로 나타났다. 노화 후 물성 변화는 IR/CR Blend가 상호 기계적 물성의 단점을 보완하여 노화에 의한 물성 변화를 감소시키는 역할을 하는 것으로 나타났다. 염소 표면처리 한 시료의 노화 전, 후 상태물성의 변화는 감소하였다. 현미경 사진 관찰 결과 CR 함량 증가에 따라 표면 분산도가 증가함을 알 수 있었다. 염소 표면처리된 고무의 표면은 일정한 방향으로 균일하게 표면처리되었고 매끄러움과 광택이 증가하였다. 고무 표면의 개질 정도는 표면염소잔류량으로 확인할 수 있었으며, 마찰계수는 고무와 결합된 염소함량에 의존하는 것으로 나타났다. CR 함량이 10 - 40 phr까지는 표면처리 초기단계에서 마찰계수가 급격히 감소하였으나, 처리용액의 염소농도가 증가할수록 마찰계수의 감소는 둔화되었고, CR 함량이 50 phr에서는 처리용액의 염소농도 변화에 따라 마찰계수의 감소가 둔화되었다.