• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2008년도 하계학술발표대회 논문집
• /
• pp.1134-1138
• /
• 2008

Electret filter media are used in general ventilation filters, disposable respirators, vehicle cabin filters, vacuum cleaners and room air cleaners. There are basic mechanisms of interception, inertial impaction, diffusion, gravitational settling, electrostatic attraction by which an aerosol particle can be deposited onto a fiber in a filter. The ability of fine particle removal strongly depends on the electrostatic forces between particles and polarized fibers. Thus, the stability of the fiber polarization is a major factor in the reliability of electret filters. In this study, electrical properties and filtration performance of electrospun filter media are quantitatively investigated. Electrical properties of electrospun filters have been studied on surface charge potential and surface charge density. Also the filtration performance of the electret filters are evaluated on collection efficiency. Electrospun filters show same collection efficiency with low pressure drop compare to commercialized HEPA filters. Surface charge potential and surface charge density of electrospun filters are increased with increasing applied voltage. Also collection efficiency of electrospun filters is increased with increasing surface charge potential and surface charge density.

• 한국염색가공학회지
• /
• 제26권4호
• /
• pp.297-304
• /
• 2014

In this study, we investigated the relationship between the adsorption property of Methyl violet or Tartrazine dye onto silica sol surface and surface charge density of the sol. The adsorption ratio of Methyl violet dye on silica sol decreased to 74% and 92% for the 68nm and 94nm silica sol, respectively, at dye concentration of $175{\mu}g/m^2$. However, the adsorption ratio of Tartrazine dye on 68nm and 94nm silica sol was about 0% for both of them. The surface charge density is $-0.40C/m^2$, $-0.26C/m^2$ for 68nm and 94nm silica sol, respectively. The amount of Methyl violet dye adsorbed on silica sol increased with an increase of surface charge density of particle at the same concentration of the dye. The adsorbed amount of the silica having high surface charge density is larger at high pH domain. But adsorbed amount of the silica having low surface charge density is larger at low pH domain.

• Journal of the Korean Wood Science and Technology
• /
• 제18권1호
• /
• pp.24-30
• /
• 1990

This study was attempted to propose a method evaluating fixation of active ingredients in Copper-Chromium-Arsenic preservatives treatment. Fixated amount of active ingredients on wood was obtained by measuring the density of surface electric charge based on $\varsigma$ potential. Data accumulated from density of surface electric charge showed that the fixated amount of preservatives on wood increased linearly as concentration of treating solution increaced, which indicatied quantitative reactions in fixation of preservatives.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 하계학술대회 논문집 A
• /
• pp.89-91
• /
• 1995

This paper deals with calculation of surface charge density on current carrying conductors by FEM. The proposed algorithm is formulated by equation of continutity in conductor region and maxwell's equations outside, respectively, Surface charge density is calculated by electric scalar potential and boundary condition for electrostatic fields.

• 설비공학논문집
• /
• 제20권12호
• /
• pp.820-824
• /
• 2008

Electret filter media are used in general ventilation filters, disposable respirators, vehicle cabin filters, vacuum cleaners and room air cleaners. There are basic mechanisms of interception, inertial impaction, diffusion, gravitational settling, electrostatic attraction by which an aerosol particle can be deposited onto a fiber in a filter. The ability of fine particle removal strongly depends on the electrostatic forces between particles and polarized fibers. Thus, the stability of the fiber polarization is a major factor in the reliability of electret filters. In this study, the electret filter is made by electrospinning process using Polystyrene which is dissolved by 5 : 5 of Tetrahydrofuran (THF) and Dimethylformamide (DMF). Also the electrical properties and the filtration performances of electrospun filter media are Quantitatively investigated. Electrical properties of electrospun filters have been studied on surface charge potential and surface charge density. Also the filtration performance of the electret filters are evaluated on collection efficiency. The surface charge potential and the surface charge density of electrospun PS filters are increased with increasing applied voltage and saturated at 30 kV of applied voltage. Also collection efficiency of electro spun filters is increased with increasing surface charge potential and surface charge density. But the surface charge potential is decreased by natural decay and it causes deterioration of particle collection efficiency.

• 대한전기학회논문지
• /
• 제34권9호
• /
• pp.341-348
• /
• 1985

This paper deals with a surface charge simulation method of calculating three-dimensional electric fields and capacitance. The principle is to divide the electrode surface into rectangular or triangular elements of which charge density is the linear function of the electrode coordinate and to formulate a linear equation for the coefficients of charge density function and to determine those coefficients by boundary conditions. It has been shown that the method can give satisfactory results for thin rectangular plates where the other methods is difficult to be applied.

• 한국세라믹학회지
• /
• 제32권11호
• /
• pp.1276-1282
• /
• 1995

• 한국세라믹학회지
• /
• 제30권11호
• /
• pp.933-940
• /
• 1993

SO42-/Al2O3 powder was prepared by the coprecipitation method from the Al(NO3)3.9H2O and NH4OH and followed by being treated with various concentrations of sulfuric acid. The characterization of these powders was performed with XRD, BET and FT-IR. The surface charge density at alumina/KCl(aq) interface was measured by potentiometric titration method. From the experimental data it was shown that acid strength, specfic surface area, and structure of surface treated alumina were independent on the amount of exchanged SO42-. However, the acid amounts of alumina were increased with the amounts of SO42- formed on alumina surface. The relation between the acid amount of SO42- ion exchanged alumina surface and the surface charge density for SO42-/Al2O3/KCl(aq) interface was investigated.

• 펄프종이기술
• /
• 제32권1호
• /
• pp.26-32
• /
• 2000

The impact of major surface chemical properties of silica sols on the retention and drainage performance of the silica based micrparticle system, Compozil was investigated using four different silica sols. And the effect of silica properties on the interactions with cationic starch and cationic plyacrylamide has also been identified. The surface charge density and the stability over pH of silica sols were increased by introducing aluminosilicate anions at surface. It was found that the charge density of silica sols determined the addition level necessary to attain the maximum retention and drainage. When silica sols were combined with cationic starch, the change density of the product was the critical properties and the degree of microagregation was of minor importance. In the cationic polyacrylamide system the degree of colloid structure appeared to be a more critcial property than the charge density of silica sols.

• 한국진공학회지
• /
• 제4권S2호
• /
• pp.156-162
• /
• 1995

For a stimulating neural electrode, the charge density should be as large as possible to provide adequate stimulation of the nervous system while allowing for miniaturization of the electrode. Since iridium oxide is able to produce high charge densities while preventing undesirable reactions due to charge storage, it has become a promising material for neural prostheses. Successful production of stable Ir and Ir oxide films on various substrates now limits the use of this material. Ir was deposited on two differently prepared surface of (mirror finish, passivation) surgical Ti-6AI-4V with several methods. Ion beam mixing of sputter deposited Ir films on passivated Ti-6AI-4V produced stable and good adherent Ir films. It was found that the increase in charge density of pure Ir on continuous cyclingis due to the accumulation of the oxide phase ( associated with a large surface area) in which the valence state of iridium changes and the double-layer capacitance increases. This study also showed that the double layer capacitance is equally or even more responsible for the high charge density of anodically formed Ir oxide.