• The Journal of Engineering Geology
• /
• v.28 no.2
• /
• pp.267-276
• /
• 2018

Volcanic ash from volcanic eruptions spreads to vast areas hundreds of kilometers away, and when volcanic ash flows into surface waters, it will be damaged by water supply. In case of water supply facilities, it provides to people drinking water and domestic water, be consumed by the people cause social disorder when water supply is cut off due to damage such as water pollution caused by harmful materials of volcanic ash. However, when we looked at the disaster management manual, the establishment of a water supply facility manual to deal with the damage of volcanic ash was found to be insufficient. Therefore, in this study, the existing volcanic and water pollution related manuals were analyzed and problems were derived. In order to make quick situation judgment and response activities, we have suggested the scope of the water supply facility manual, disaster type, major missions and system of related organizations, and scenario of crisis situation by disaster type.

• Journal of Environmental Impact Assessment
• /
• v.25 no.6
• /
• pp.532-541
• /
• 2016

The National Environmental Specimen Bank (NESB) has been collecting broad leave samples to monitor environmental pollution from five different designated sampling areas. In order to ensure the reproducibility and comparability of the results, all the procedures from selecting trees and pooling leaves to make the representative sample are defined in the standard operation procedures(the SOP). The representative samples were subjected to the chemical analyses for some heavy minerals and Polycyclic Aromatic Hydrocarbons(PAHs). The uncertainty levels involved in each step of the SOP, that is, the sampling and the chemical analysis, were derived using the Robust ANOVA, which enables the relative comparison among the different levels of pollutants concentrations with confidence. Furthermore, the effect of the varying degrees of precipitation on the pollutants concentration of the leaves was also examined. Overall, the biological difference estimated from the duplicate samples was found to exceed the variation across the site, implying even aerial deposition over site. Samples from Gwanak Mt. showed highest heavy metal concentrations than the other sites. Washing off effect of the pollutants adhering in the form of particles on the leaf surface was found to be affected by the cumulative precipitation.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.2 no.1
• /
• pp.74-89
• /
• 1999

Distributions and budgets of nitrogen and phosphorus in inner and central areas of Hiroshima bay were investigated for three years from January 1991 to December 1993. The mean loadings of nitrogen and phosphorus Stowed into the entire bay were 870 tonN/month and 129 tonP/month, respectively. About 79 % of nitrogen and 84 % of phosphorus loadings were flowed into the inner area. The TN:TP and DIN:DIP atomic ratios of the discharged freshwater were about 15 and 21, respectively. The PON:POP and DIN:DIP atomic ratios of seawater in the bay varied from 8 to 14 with a mean value of 11, and from 8 to 18 with a mean value of 12, respectively. Estimated fluxes of nitrogen and phosphorus based on the exchange of seawater were 585 tonN/month and 106 tonP/month, respectively, from the inner area to the central area, whereas those fluxes were 62 tonN/month and 107 tonP/month, respectively, from the central area to Akinada. When the remainders of nitrogen and phosphorus substracted outflows from inflows should be sunk, sink fluxes of nitrogen and phosphorus per surface area of the entire bay would be about 9.83 gN/m²ㆍyr and 0.27 gP/m²ㆍyr, respectively. In the central area, the remainders of nitrogen and phosphorus were greater than those in inner area. The residence times of nitrogen and phosphorus were estimated to be about 112 days, respectively, in the entire of Hiroshima Bay.

• Science of Emotion and Sensibility
• /
• v.14 no.4
• /
• pp.593-604
• /
• 2011

This study examines potential growth and different perspectives on green-walls, which are being re-evaluated recently. The aim is to identify the viewer preferences concerning the walls by collecting a wide spectrum of information to create an interior design related comprehensive and intellectual database. Also based on this proposition, choosing a green surface of indoor wall as a specific example stimulus, identifying a relationship betweeationsviewer's preference factors. The relationship will formulate detailed and absolute qualities, which will reach potential areas that the green walls can be widely applied in. As a result of a factor analysis, the viewers classified into the 3 factors as is pleasant, gorgeous and rich about the stimulus. Preferred key factors, which are closely related to emotional image language, were; cool, tidy, comfortable and beautiful. The common factors in preferred design stimulus, in order of importance are color>elements>image/form/plants. Specific levels of design factors according to relevance are contrast>furniture> modern>central/creeper foliage plants. In the meantime, this study is leading the process of quantitative measurement of green-walls to a new design direction and it is critical to consistently experimenting to back up the theory with solid evidence.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.19 no.3
• /
• pp.355-373
• /
• 2017

Tunnelling in urban areas, it is essential to understand existing structure-tunnel interactive behavior. Serviced structures in the city are supported by pile foundation, since they are certainly effected due to tunnelling. In this research, thus, pile load distribution and ground behavior due to tunnelling below grouped pile were investigated using laboratory model test. Grouped pile foundations were considered as 2, 3 row pile and offsets (between pile tip and tunnel crown: 0.5D, 1.0D and 1.5D for generalization to tunnel diameter, D means tunnel diameter). Soil in the tank for laboratory model test was formed by loose sand (relative density: Dr = 30%) and strain gauges were attached to the pile inner shaft to estimate distribution of axial force. Also, settlements of grouped pile and adjacent ground surface depending on the offsets were measured by LVDT and dial gauge, respectively. Tunnelling-induced deformation of underground was measured by close range photogrammetric technique. Numerical analysis was conducted to analyze and compare with results from laboratory model test and close range photogrammetry. For expression of tunnel excavation, the concept of volume loss was applied in this study, it was 1.5%. As a result from this study, far offset, the smaller reduction of pile axial load and was appeared trend of settlement was similar among them. Particulary, ratio of pile load and settlement reduction were larger when the offset is from 0.5D to 1.0D than from 1.0D to 1.5D.

• Journal of the Korean Applied Science and Technology
• /
• v.35 no.3
• /
• pp.935-939
• /
• 2018

3D Printing technology is developing in various prototypes for medical treatment, food, fashion as well as machinery and equipment parts production. 3D printing technology is also able to fully be utilized to other industries in terms of developing its technology which has been reported in many field of areas. 3D printing technology is expected to be used in various applications related to $4^{th}$ industrial revolution such as finished products and parts even it is still carried out in the prototype model. In this study, we have investigated and developed conductive resin for 3d printing application based on reduced graphene oxide(rGO)/Polypyrrole(Ppy) composite and polycaprolactone(PCL) as a biodegradable polymer. The electrical properties and surface morphology of the conductive PCL resin based on therGO/Ppy composite were analyzed by 4point-probe and scanning electron microscope(SEM). The conductive PCL resin based on rGO/Ppy composite is expected to be applicable not only 3D printing, but also electronic materials in other industrial fields.

• The Korean Journal of Pesticide Science
• /
• v.7 no.1
• /
• pp.58-65
• /
• 2003

Various physicochemical parameters for the active ingredients of 245 herbicides were calculated to develope a diagnosis and estimation system for utility as herbicide. The range of physico-chemical parameters for each inhibitors of photo system II (H1), acetolactate synthase (ALS) (H2) and herbicides were confirmed. The distribution ranges of 85% dependence for each physicochemical parameters were Obs.logP :$-0.90\sim4.50$, dipol moment: $1.80\sim12.22$ (debye), molecular refractivity: $53.0\sim104.0(cm^3/mol)$, polarizability: $19.0\sim37.0(\AA^3)$, HOMO energy: $-9.98\sim-7.34$ (eV), LUMO energy:$-2.76\sim0.40$ (eV), Van der Waals molecular volumes: $558.0\sim995.0(cm^3)$, molecular weight: $202.0\sim430.0$ (amu) and surface areas (Grids): $194.0\sim356.0(\AA^2)$, hydration energy: $-10.16\sim114.7$ Kcal/mol, respectively. It is suggested that MR and polarizability constants will be able to distinguish between herbicides and medicinal drugs. Results revealed that various compounds based on the range of physicochemical parameters of herbicides could be diagnosed and estimated.

• Korean Journal of Oriental Medicine
• /
• v.6 no.1
• /
• pp.123-132
• /
• 2000

Bone is continuously remodeled during adult life with the resorption of old bone by osteoclasts and its subsequent replacement by osteoblast. Bone homeostasis is maintained by a balance between activities of osteoblasts and osteoclasts, but an imbalance between resorption and formation results in bone diseases including osteoporosis. Osteoblasts line up on the bone surface, especially regions of new bone formation, lay down bone matrix (osteoid) in orderly lamellae and induce its mineralization. Thus, the increased activity of osteoblasts is helpful to treat and prevent osteoporosis. In this study, we examined whether 80% EtOH extract of yukmijiwhang-whan is capable of affecting osteoblast proliferation using human osteoblast-like cell line, MG-63 and Saos-2. In an in vivo experiment, extract of yukmijiwhang-whan was administered for 9 weeks to ovariectomized (OVX) rats. At necropsy, uterus weights were measured, and trabecular bone areas (TBAS) of tibia and the sixth lumbar vertebra were measured by bone histomorphology. The maximum cell proliferation of MG-63 caused by extract of yukmijiwhang-whan at $5\;{\times}\;10^{-6}\;mg/ml$ was approximately 115% compared with control. In Saos-2, cell proliferation was approximately 145% of control at $5\;{\times}\;10^{-4}\;mg/ml$ and maximum alkaline phosphatase (ALP) activity was approximately 143% of control at $5\;{\times}\;10^{-5}\;mg/ml$. In animal study, however, the tibia and lumbar TBAS of the yukmijiwhang-whan group did not increased than the OVX control group. In conclusion, the 80% EtOH extract of yukmijiwhang-whan increased proliferation of osteoblasts but did not prevent bone loss in OVX rats.

• The KIPS Transactions:PartB
• /
• v.9B no.2
• /
• pp.255-262
• /
• 2002

The Virtual Reality (VR) is an appealing subject which can be applied to various areas because of its merit - removal of time limits and space. Recently, as the technology of xDSL spreads widely, a concern of VR is on the on-line service of 3D model data in real time. But, the immensity of 3D model is an obstacle to achieve these endeavors. To solve these problems, the image based VR technique is applied. The proposed method in this paper is one of solutions on the immensity problem of 3D model data in the on-line services. This paper exploits the mixed technique of image based VR and surface rendering based on volume rendering. By using the proposed method, we can solve the immensity problem. Consequently, tole service user can explore virtual 2D volume model with almost equal to reality of 3D volume model. Furthermore, this paper explains a method to implement this service on general web environments. Of course, to fulfill these procedures, additional skills which reduce consuming time in data mining are also mentioned. The contribution of this paper is to provide a practical method for handling of large volume data web service in real-time. illustrative examples are presented to show the effectiveness of the proposed method.

• Journal of radiological science and technology
• /
• v.21 no.2
• /
• pp.36-42
• /
• 1998

Treatment of a large diseased area with electron often requires the use of two or more adjoining fields. In such cases, not only electron beam divergence and lateral scattering but also fields overlapping and separation may lead to significant dose inhomogeneities(${\pm}20%$) at the region of junction of fields. In this study, we made Acrylic Electron Wedges to improve dose inhomogeneities(${\pm}5%$) in these junction areas and to apply it to clinical practices. All measurements were made using 6, 9, 12, 16, 20 MeV Electron beams from a linear accelerator for a $10{\times}10\;cm$ field at 100cm of SSD. Adding a 1 mm sheet of acryl gradually from 1 mm to 15 mm acquires central axis depth dose beam profile and isodose curves in water phantom. As a result, for all energies, the practical range was reduced by approximately the same distance according to the acryl insert, e.g. a 1 mm thick acryl insert reduces the practical range by approximately 1 mm. For every mm thickness of acryl inserted, the beam energy was reduced to approximately 0.2 MeV. These effects were almost Independent of beam energy and field size. The use of Acrylic Electron Wedges produced a small increase(less than 3%) in the surface dose and a small increase(less than 1%) in X-ray contamination. For acryl inserts, thickness of 3 mm or greater, the penumbra width increased nearly linear for all energies and isodose curves near the beam edge were nearly parallel with the incident beam direction at the point of penumbra width($35\;mm{\sim}40\;mm$). We decide heel thickness and angle of the wedge at this point. These data provide the information necessary to design Acrylic Electron Wedge which can be used to improve dose uniformity at electron field junctions and it will be effectively applied to clinical practices.