• 대한치과보철학회지
• /
• 제40권3호
• /
• pp.275-286
• /
• 2002

Statement of problem. Surface alteration of the implant screws after function may be associated with mechanical failure. Theses metal fatigue appears to be the most common cause of structural failure. Purpose. The purpose of this study was to evaluate surface alteration of the implant screws after function through the examination of used and unused implant screws in SEM(scanning electron microscope). Materials and methods. In this study, abutment screws(Steri-oss, 3i), gold retaining screw(3i) and titanium retaining screw(3i) were retrieved from patients. New, unused abutment and retaining screws were prepared for control group. Each of the old, used screws was retrieved with a screwdriver. And retrieved implant complex of Steri-oss system was prepared for this study. Then, SEM investigation and EDS analysis of abutment and retaining screws were performed. And SEM investigation of cross-sectioned sample of retrieved implant complex was performed. Results. In the case of new, unused implant screws, as maunfactured circumferential grooves are regularly examined and screw thread are sharply remained. Before ultrasonic cleansing of old, used implant screw, a lot of accumulation and corrosion products were existed. After ultrasonic cleansing of old, used implant screws, circumferential grooves as examined before function were randomly deepened and scratches increased. Also, dull screw thread was examined. More surface alterations after function were examined in titanium screw than gold screw. And more surface alteration was examined when retrieved with driver than retrieved without driver. Conclusions. These surface alteration after function may result in the screw instability. Regularly cleansing and exchange of screws was recommended. We recommend the use of gold screw rather than titanium screw, and careful manipulation of the driver.

• 방사성폐기물학회지
• /
• 제19권4호
• /
• pp.469-477
• /
• 2021

Safe storage of spent nuclear fuel in deep underground repositories necessitates an understanding of the long-term alteration of metal canisters and buffer materials. A small-scale laboratory alteration test was performed on metal (Cu or Fe) chips embedded in compacted bentonite blocks placed in anaerobic water for 1 year. Lactate, sulfate, and bacteria were separately added to the water to promote biochemical reactions in the system. The bentonite blocks immersed in the water were dismantled after 1 year, showing that their alteration was insignificant. However, the Cu chip exhibited some microscopic etch pits on its surface, wherein a slight sulfur component was detected. Overall, the Fe chip was more corroded than the Cu chip under the same conditions. The secondary phase of the Fe chip was locally found as carbonate materials, such as siderite (FeCO₃) and calcite ((Ca, Fe)CO₃). These secondary products can imply that the local carbonate occurrence on the Fe chip may be initiated and developed by an evolution (alteration) of bentonite and a diffusive provision of biogenic CO₂ gas. These laboratory scale results suggest that the actual long-term alteration of metal canisters/bentonite blocks in the engineered barrier could be possible by microbial activities.

• 한국광물학회지
• /
• 제23권2호
• /
• pp.141-150
• /
• 2010

제주도 우도 응회구의 현무암질 화산재는 대부분 미약하게 변질되었으나, 지표부근에서는 연황색으로 변질되었다. 육상 환경에서 화산재의 표성 변질 및 고화과정을 조사하기 위하여 표성 변질 우도 화산재에 대하여 X선회절, 주사 및 투과전자현미경, 전자현미분석을 실시하였다. 분석결과, 화산재 입자는 현무암질 유리 기질과 사장석, 감람석, 휘석 결정으로 구성되어 있었다. 입자 가장자리로부터 유리가 선택적으로 변질되어 교질상 변질테가 형성되었으며, 큰 입자 중심에는 변질되지 않은 유리가 잔존한다. 변질테와 유리 경계에는 매우 얇은 용탈 유리층이 존재하며, 변질테는 Fe와 Ti이 풍부한 극미립 비정질 규산염과 스멕타이트로 구성되어 있다. 변질 유리에서 방출된 용존물은 공극에 벌집모양 스멕타이트 집합체로 다량 침전되었으며, 화산재의 고화작용에 기여하였다.

• 한국광물학회지
• /
• 제25권4호
• /
• pp.233-247
• /
• 2012

통가국 라우분지(Lau Basin)의 해저열수광상 개발을 위한 해저열수광상 분포 및 산상에 관한 특성을 규명하기 위하여 X선 회절분석을 통하여 해저열수광상 해저퇴적물 및 열수변질대의 광물조성을 연구하였다. 연구에 사용된 시료는 TA 26 해저산 주변에서 채취된 코어 시료, 기반암 및 해저퇴적물 시료이고, 벌크 시료와 점토 부분을 분리한 정방위 시료를 제작하여 X선 회절분석을 실시하였다. TA 26 해저산에서 채취된 기반암은 대부분 사장석과 석영으로 이루어져 있는 데 반하여, 표층퇴적물은 대부분 카올린광물과 스멕타이트로 구성되어 있다. 열수구 퇴적물은 대부분 석고, 중정석, 섬아연석, 황철석 등 황산염광물과 황화광물로 구성된다. 기반암과 해저퇴적물의 광물조성으로 미루어 보아, TA 26 해저산의 열수광화대는 주변에 스멕타이트 또는 카올린광물을 형성시키는 정도의 이질변질작용을 일으켰음을 알 수 있다. MC08H-06 시추 코어 시료는 상부는 비변질대, 하부는 스멕타이트와 카올린광물로 구성된 이질변질대에 해당한다. 다양한 황화광물과 황산염 광물의 존재, 이질변질작용에 해당하는 열수변질대의 존재는 TA 26 해저산 내에 해저열수광상이 존재하고 있음을 지시하는 것으로 판단된다.

• 광물과산업
• /
• 제29권
• /
• pp.56-66
• /
• 2016

열수변질대가 폭넓게 분포하고 있는 우리나라에서 자연사면이나 인공사면에서 열수변질대 내에 산출되는 점토맥이 산사태 발생에 중요한 역할을 할 수 있다. 점토맥이 존재하는 지반에 지표수가 침투되면 점토광물의 팽윤성 때문에 국지적으로 간극수압이 급격히 상승할 수 있다. 간극수압의 상승으로 세립의 점토광물이 침식될 수 있다. 침식된 점토광물은 수두가 큰 곳에서 작은 곳으로 유동하면서 동수경사가 작은 부분에서 유속이 느려져 퇴적된다. 점토광물이 퇴적된 곳에서 국지적인 간극수압의 증가로 인한 지하수의 유출이 사면파괴를 일으킬 수 있다. 이에 본고에서는 열수변질 점토맥과 산사태와 관련한 국내외 자료를 소개하고자 한다.

• 한국광물학회지
• /
• 제2권1호
• /
• pp.37-46
• /
• 1989

X-ray, optical and electron microscope studies exhibit that the amphiboles in anorthositic saprolite from kaolin deposits, located in Suryun-myeon, Seongju-gun, Kyungsangbuk-do, have altered under weathering conditions to smectite, mixed-layer mineral, vermiculite and goethite. In early supergene alteration stage when rock structure is still preserved, smectite occurs as initial weathering product of amphibole. Further weathering leads to the formation of mixed-layer mineral, vermiculite and goethite as indicated by XRD and SEM studies. Scanning electron microscopy studies of amphibole show that the dissolution of amphibole proceeds by selective etching at the surface along weaker zones producing distinct etch pattern, The calcic amphiboles according to electron microprobe analyses, show leaching of the most mobile elements (Mg, Ca and Fe) during alteration.

• Journal of Periodontal and Implant Science
• /
• 제36권3호
• /
• pp.705-716
• /
• 2006

The present study was performed to evaluate the effect of tetracycline-HCl on the change of implant surface microstructure according to application time. Implant with pure titanium machined surface, GBA surface and RBM surface were utilized. Implant surface was rubbed with 50mg/ml tetracycline-HCl solution for ${\frac{1}{2}}$min. 1min. $1{\frac{1}{2}}$min. 2min. and $2{\frac{1}{2}}$min. respectively in the test group. Then, specimens were processed for scanning electron microscopic observation. The results of this study were as follow. 1. Both test and control group showed a few shallow grooves and ridges in pure titanium machined surface implants. There were not significant differences between two group. 2. In GBA surfaces, control group exhibit many porous depression, and each depression were divided by strict border. Experimental group applied with tetracycline-HCl for 2min. were similar with control group. But when applied for $2{\frac{1}{2}}$min. surface alteration and border breakdown started, resulting enlargement of the porous depression. 3. In REM surface, control group exhibit rough, uneven surface with crater-like depression can be found. The surface alteration started when tetracycline-HCl was applied for 30sec. resulting breakdown of the crater-like depression. Depression became larger as applying time increased.

• 터널과지하공간
• /
• 제30권4호
• /
• pp.417-431
• /
• 2020

이 연구에서는 라이다(LiDAR) 반사강도를 이용하여 암반 풍화도 및 변질도를 산정하는 작업의 기초연구를 진행하였다. 실내 시험을 통하여 라이다 반사강도에 직접적으로 영향을 미치는 인자와 그 영향 정도를 정량적으로 고찰하고자 하였다. 영향 인자로는 주사거리, 입사각, 표면거칠기, 표면색상, 암석물성, 광물조성, 포화도를 선정하였다. 실험에서는 FARO 라이다 장비와 12가지 종류의 시험편을 사용하였다. 실험 결과 반사강도는 표면색상, 입사각, 주사거리, 암석물성, 포화도 혹은 표면습윤상태, 표면거칠기 순으로 영향을 크게 미치는 것으로 나타났다.

• 한국환경복원기술학회지
• /
• 제19권1호
• /
• pp.185-193
• /
• 2016

Purpose of this study is to classify damaged lands according to the cause of the damage and their influences based on characteristic of the damaged lands in DeMilitarized Zone(DMZ) area, and utilize this study as a fundamental study for establishment of ecosystem restoration system. Literature review and field survey have been conducted to review the damage status of DMZ area. For field survey, first year and second year have been conducted, in which type of the damage has been reviewed in this study. In the result, types of damage have been classified into 6 categories: 'alteration of initial landform', 'loss of surface layer', 'land pollution', 'alteration of soil chemical property', 'decline of vegetation', and 'invasion of foreign species'. Restoration for each damage type is as following. First, for alteration of initial landform, the land is restored to the original landform prior to the damage and connection to surrounding ecosystem is considered. Second, for loss of surface layer, lost surface layer is restored or further loss is prevented with stabilization. Third, for land pollution, source of the pollution is eradicated or self-circulation with purification of polluted land is encouraged. Fourth, for alteration of soil chemical property, soil is restored of its original property with eradication of the pollution source and improvement of soil. Fifth, for decline of vegetation, current vegetation and anticipated alteration in future are considered and number of wild species is to be increased based on structure and characteristic of nearby vegetation. Sixth, for invasion of foreign species, prevention of dominance by risky species and facilitation ecological stability with ecological management are to be considered. Influence according to the cause of damage has occurred in secondary(indirect) influence or simultaneous occurrence of several damage types. Considering all these aspects, when type of the damage is complex, restoration process for each of former mentioned 6 damage types with solitary influence should be considered in unison.

• 대한치과보철학회:학술대회논문집
• /
• 대한치과보철학회 2001년도 추계학술대회
• /
• pp.44-44
• /
• 2001