• 한국재료학회지
• /
• 제19권11호
• /
• pp.569-575
• /
• 2009

In this study, the effects of silver treatment and activation on the physical and chemical properties of spherical activated carbon (SAC) were studied. The textural properties of SAC were characterized by BET surface area, XRD, SEM, iodine adsorption, strength intensity, pressure drop and antibacterial effects. BET surface areas of SACs decreased with an increase of the amount of PR before and after activation, and the BET surface areas of SACs were found to be about 2-3 times the size of those before activation. The XRD patterns showed their existing state as stable Ag crystals and carbon structure. The Ag particles are seaweedlike and uniform, being approximately 5-10 μm in size deposited on the surface of activated carbon. All of the samples had much more iodine adsorption capability after activation than before activation. The strength values of SACs increased with an increase of the amount of PR, and there was a smaller drop in the strength values of SACs with silver treatment than with non-silver treatment after activation. The Ag-SAC composites showed strong antibacterial activity against Escherichia coli (E. Coli).

• 한국표면공학회지
• /
• 제39권4호
• /
• pp.190-197
• /
• 2006

The effects of blasting and acidic treatment on the corrosion characteristics of dental implant fabricated with Cp-Ti and Ti-6Al-4V alloy have been researched by using electrochemical methods. The fabricated implants were cleaned and sandblasted by $Al_2O_3$ powder and then acidic treatment was carried out in nitric acid solution. The surface morphology were observed using scanning electron microscope. The corrosion behaviors were investigated using potentiosat and EIS in 0.9% NaCl solution at $36.5{\pm}1^{\circ}C$. The potentio-dynamic test in 0.9% NaCl indicated that the corrosion potential of blasting and acidic treated implant was lower than that of non treated implant, but current density was higher than that of non treated implant. From the cyclic potentiodynamic test results of Ti implant, the passivation current density of blasting and acidic treated implant slightly higher than that of non treated implant. From A.C. impedance test results in 0.9% NaCl solution, polarization resistance($R_p$) value of blasting and acidic treated implant was lower than that of non treated implant. In case of blasting and acidic treated implant surface, the pits were observed in valley and crest of implant surface.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2011년도 춘계학술대회 및 Fine pattern PCB 표면 처리 기술 워크샵
• /
• pp.102-102
• /
• 2011

• Carbon letters
• /
• 제11권3호
• /
• pp.224-234
• /
• 2010

Four activated carbons were produced by two-stage process as followings; semi-carbonization of indigenous biomass waste, i.e. cotton stalks, followed by chemical activation with KOH under various activation temperatures and chemical ratios of KOH to semi-carbonized cotton stalks (CCS). The surface area, total pore volume and average pore diameter were evaluated by $N_2$-adsorption at 77 K. The surface morphology and oxygen functional groups were determined by SEM and FTIR, respectively. Batch equilibrium and kinetic studies were carried out by using a basic dye, methylene blue as a probe molecule to evaluate the adsorption capacity and mechanism over the produced carbons. The obtained activated carbon (CCS-1K800) exhibited highly microporous structure with high surface area of 950 $m^2/g$, total pore volume of 0.423 $cm^3/g$ and average pore diameter of 17.8 ${\AA}$. The isotherm data fitted well to the Langmuir isotherm with monolayer adsorption capacity of 222 mg/g for CCS-1K800. The kinetic data obtained at different concentrations were analyzed using a pseudo-first-order, pseudo-second-order and intraparticle diffusion equations. The pseudo-second-order model fitted better for kinetic removal of MB dye. The results indicate that such laboratory carbons could be employed as low cost alternative to commercial carbons in wastewater treatment.

• 한국재료학회지
• /
• 제30권7호
• /
• pp.327-332
• /
• 2020

Laser induced surface activation (LISA) technology requires refined selection of process variables to fabricate conductive microcircuits on a general polymer material. Among the process variables, laser mode is one of the crucial factors to make a reliable conductor pattern. Here we compare the continuous wave (CW) laser mode with the pulse wave (PW) laser mode through determination of the surface roughness and circuit accuracy. In the CW laser mode, the surface roughness is pronounced during the implementation of the conductive circuit, which results in uneven plating. In the PW laser mode, the surface is relatively smooth and uniform, and the formed conductive circuit layer has few defects with excellent adhesion to the polymer material. As a result of a change of laser mode from CW to PW, the value of Ra of the polymer material decreases from 0.6 ㎛ to 0.2 ㎛; the value of Ra after the plating process decreases from 0.8 ㎛ to 0.4 ㎛, and a tight bonding force between the polymer source material and the conductive copper plating layer is achieved. In conclusion, this study shows that the PW laser process yields an excellent conductive circuit on a polymeric material.

• Transactions on Electrical and Electronic Materials
• /
• 제1권1호
• /
• pp.6-11
• /
• 2000

The hydrogen plasma treatment of silicon wafers in the reactive ion-etching mode was studied for the application to silicon-on-insulator wafers which were prepared using the wafer bonding technique. The chemical reactions of hydrogen plasma with surface were used for both surface activation and removal of surface contaminants. As a result of exposure of silicon wafers to the plasma, an active oxide layer was found on the surface. This layer was rendered hydrophilic. The surface roughness and morphology were examined as functions of the plasma exposing time and power. In addition, the surface became smoother with the shorter plasma exposing time and power. The value of initial surface energy estimated by the crack propagation method was 506 mJ/㎡, which was up to about three times higher as compared to the case of conventional direct using the wet RCA cleaning method.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2014년도 추계학술대회 논문집
• /
• pp.185-185
• /
• 2014

In this study, we investigated surface characteristics of hydroxyapatite coated surface on nano/micro pore structured Ti-35Ta-xNb alloys. This paper was focus on morphology and corrosion resistance of Anodic oxidation. To prepare the samples, Ti-35Ta-xNb (x= 0, 10 wt. %) alloys were manufactured by arc melting and heat-treated for 12 h at $1050^{\circ}C$ in Ar atmosphere at $0^{\circ}C$ water quenching. Micro-pore structured surface was performed using anodization with a DC power supply at 280 V for 3 min, nanotube formed on Ti-35Ta-xNb alloys was performed using DC power supply at 30 V in 60 min at room temperature. Surface morphology and structure were examined by field-emission scanning electron microscopy, energy-dispersive X-ray spectroscopy and X-ray diffraction.

• 한국세라믹학회지
• /
• 제40권5호
• /
• pp.468-474
• /
• 2003

안정화 PAN(Polyacronitrile)계 섬유를 이용하여 물리적인 방법과 화학적인 방법으로 활성탄소섬유(Activated Carbon Fibers)를 제조하고, 그 특성을 비교평가 하였다. 본 연구에서는 안정화 PAN계 섬유를 수증기 및 $CO_2$를 이용한 물리적 활성화와 KOH를 이용한 화학적 활성화에 의해 여러 등급의 활성탄소섬유를 제조하였고, 비표면적, 요오드흡착량, 미세구조, 세공구조 등을 측정하였다. 물리적 활성화 방법에는 수증기와 $CO_2$가 사용되었는데, 수증기활성화의 경우 99$0^{\circ}C$의 활성화 온도에서 1635 m$^2$/g의 비표면적을 나타내었고, $CO_2$ 활성화의 경우에는 99$0^{\circ}C$의 활성화 온도에서 671 m$^2$/g의 비표면적을 나타내었다. KOH를 이용한 화학적 활성화 방법에서는 KOH와 안정화 PAN계 탄소섬유의 비가 1.5 : 1인 경우 90$0^{\circ}C$의 활성화 온도에서 3179 m$^2$/g의 비표면적을 나타내었다. 물리적 활성화와 화학적 활성화로 제조된 활성탄소섬유의 질소흡착등온선의 결과로 보면 type I의 형태와 type I에서 type II로의 전이형태의 등온흡착곡선을 나타내었다.

• 마이크로전자및패키징학회지
• /
• 제21권3호
• /
• pp.51-56
• /
• 2014

솔더조인트의 신뢰성에는 인쇄회로기판의 표면처리 특성이 많은 영향을 미치고 있다. 본 연구에서는 ENEPIG 표면처리에서 Sn-4.0wt%Ag-0.5wt%Cu (SAC405) 솔더와 Pd 촉매 처리 시간에 따른 high speed shear 에너지 및 파괴 모드를 연구하였다. 또한 Pd 촉매 처리 시간과 무전해 Ni-P 도금의 표면 거칠기 (Ra)와의 관계를 규명하였다. Pd 촉매 처리 시간이 길어질수록 Ni-P nodule의 면적은 넓어지고, Ni-P 도금의 표면 거칠기 (Ra)는 감소한다. 이러한 영향으로 질산 기상 처리한 시편의 high speed shear 평가후 quasi-brittle과 brittle 모드의 점유율은 감소한다. 이는 Pd 촉매 처리 시간의 증가가 SAC405 솔더조인트의 신뢰도를 향상시키는 역할을 한다는 것을 나타낸다.

• 한국표면공학회지
• /
• 제38권4호
• /
• pp.167-173
• /
• 2005

Surface characteristics of HA(hydroxyapatite) coated dental implant alloy by Sol-Gel method were investigated using potentiostat, ICP, SEM, EDX, EPMA and surface roughness tester. Surface roughness of HA coated specimen by Sol-Gel showed higher than that of PVD coated specimen. Corrosion resistance increased in the order of $1\%$ lactic acid, artificial saliva, $0.5\%$ HCI and $0.9\%$ NaCl solution. Amount of Ca element release was higher than that of V and P in the $0.5\%$ HCI and $0.9\%$ NaCl solution.