• Carbon letters
• /
• v.8 no.2
• /
• pp.134-136
• /
• 2007

In this work, activated carbons (ACs) were prepared from polystyrene-based cation-exchangeable resin (PSI) by a chemical activation with KOH as an activating agent. The surface morphologies were observed by using SEM, and the textural properties were investigated by using nitrogen adsorption at 77 K. From the experimental results, it was found that the well-developed micro- and mesopores were produced by a chemical activation, and the textural properties including specific surface areas and pore volumes were greatly enhanced. The electrochemical behaviors of the ACs showed similar phenomena with that of textural properties. These results indicated that KOH activation played an important role in the changes of surface, and pore structures, resulting in enhancing the electrochemical properties of the ACs prepared in present work.

• The Journal of Korean Physical Therapy
• /
• v.28 no.3
• /
• pp.189-194
• /
• 2016

Purpose: This study focuses on influence of ankle stabilization training on balance ability and lower limb muscle activation of soccer player with functional ankle instability. Methods: Subjects were grouped into ankle stabilization training group using biofeedback comprised of 15 subjects and general exercise group of 15. The training was conducted for 30 minutes, 3 times a week for 8 weeks in total. All 30 football players conducted plyometric training for 30 minutes before main training. To evaluate balance ability, biorescure was used to measure whole path length and surface area and surface electromyography (EMG) system was used to measure tibialis anterior, tibialis posterior, and soleus to evaluate lower limb muscle activation. Results: The experiment group showed significant difference to the comparison group in regard of whole path length and surface area which represents balancing capability and muscle activation of tibialis anterior, tibialis posterior, and soleus. Conclusion: Therefore, ankle stabilization training using biofeedback is more effective in enhancing balance ability and lower limb muscle activation than general exercise.

• The Journal of Korean Physical Therapy
• /
• v.30 no.6
• /
• pp.211-217
• /
• 2018

Purpose: This study is to investigate influence of tDCS on lower limb muscle activity and balance ability in soccer player. Methods: Sessions were conducted with 15 subjects in tDCS group and 15 in action observation training group for 20 minutes, 5 sessions a week, for 8 weeks. All soccer players underwent 30 minutes of plyometric training before main exercise. To evaluate lower limb muscle activation, rectus femoris and biceps femoris were taken measure using surface electromyogram system and to evaluate balance ability, surface area, whole path length, limited of stability were measured using biorescue. Results: Regarding balance shown in surface area, whole path length, limited of stability and muscle activation in rectus femoris and biceps femoris, tDCS group showed more significant change than action bservation training group. Conclusion: Therefore, intervention using tDCS is more effective in improving lower limb muscle activation and balance ability than action observation training.

• Journal of Adhesion and Interface
• /
• v.23 no.4
• /
• pp.101-107
• /
• 2022

Adhesive joints have many advantages such as weight savings, corrosion and fatigue resistance and now developed even withstand of high impact and dynamic loads. However, an adhesion has cumbersome and complicated surface preparation processes. The surface preparation step is critical in adhesive joint manufacturing in order to obtain the prescribed strength for adhesive joints. In this study, it was attempted to simplify and reduce the number of surface preparation steps, and abrasion and rapid adhesive application (ARAA) process is developed for an alternative solution. The abrasion processes are performed only for creating surface roughness in standard procedures (SP), although the abrasion processes cause surface activation itself. The results showed that there is no need the long procedures in laboratory or chemical agents for adhesion. After the abrasion process, the attracted and highly reactive fresh surface layer obtained, and its effect on bonding success is observed and analyzed in this research, in light of the essential physic and adhesion theories. Al 6061 aluminum adherends and epoxy-based adhesives were chosen for bonding processes, which is mostly used in light vehicle parts. The adherends were cleaned, treated and activated only with abrasion, and after the adhesive application the specimens were tested under quasi-static loading. The satisfied ARAA results were compared with that of the specimens fabricated by the standard procedure (SP) of adhesion processes of high impact loads.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2015.11a
• /
• pp.141-141
• /
• 2015

In this study, a series of hydroxyaptite (HAp) are produced on Ti dental implant using electrochemical deposition. Based on the preliminary analysis of the coating structure, composition and morphology. In vitro studies were performed with MC3T3-E1 cell to investigate the effect of biological change on different surface conditions.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2011.05a
• /
• pp.104-104
• /
• 2011

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2015.05a
• /
• pp.66-66
• /
• 2015

• Bulletin of the Korean Chemical Society
• /
• v.35 no.1
• /
• pp.57-61
• /
• 2014

In this study, carbon aerogel (CA) was synthesized using a soft-template method, and the optimum conditions for the adsorption of carbon dioxide ($CO_2$) by the carbon aerogel were evaluated by controlling the activation temperature. KOH was used as the activation agent at a KOH/CA activation ratio of 4:1. Three types of activated CAs were synthesized at activation temperatures of $800^{\circ}C$(CA-K-800), $900^{\circ}C$(CA-K-900), and $1000^{\circ}C$(CA-K-1000), and their surface and pore characteristics along with the $CO_2$ adsorption characteristics were examined. The results showed that with the increase in activation temperature from 800 to $900^{\circ}C$, the total pore volume and specific surface area sharply increased from 1.2165 to $1.2500cm^3/g$ and 1281 to $1526m^2/g$, respectively. However, the values for both these parameters decreased at temperatures above $1000^{\circ}C$. The best $CO_2$ adsorption capacity of 10.9 wt % was obtained for the CA-K-900 sample at 298 K and 1 bar. This result highlights the importance of the structural and textural characteristics of the carbon aerogel, prepared at different activation temperatures on $CO_2$ adsorption behaviors.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2015.05a
• /
• pp.63-63
• /
• 2015

• Carbon letters
• /
• v.10 no.4
• /
• pp.339-344
• /
• 2009

Henequen fiber was air-stabilized, carbonized, and steam-activated to obtain high surface area activated henequen fiber (AHF). Thermal behavior of henequen fibers has been studied by TGA. The structural morphology and characteristics were observed by SEM and BET surface area measurement. The yield of AHF from natural henequen was in the range of 20~25 wt%. Mesopores (2~2.5 nm) were developed on the AHF as the activation temperature was raised up to $700^{\circ}C$, and the band of mesopore size distribution moved to 15~30 nm when the activation were carried out at $900^{\circ}C$ for 30 min. The specific surface area and the total pore volume were about $1394\;m^2/g$ and $1.30\;cm^3/g$, respectively at this activation conditions.