• Transactions on Electrical and Electronic Materials
• /
• v.3 no.4
• /
• pp.10-15
• /
• 2002

Surface states of polydimethylsiloxane (PDMS) treated by plasma were investigated by the analysis by x-ray photoelectron spectroscopy (XPS) and surface voltage decay. Plasma treatment causes the silica-like(SiO$\_$x/, x=3∼4) oxidative layer, which is confirmed with XPS, and lowers surface resistivity from 1.78$\times$1014 Ω/square to 1.09$\times$10$\^$13/ Ω/square with increasing the plasma treatment time. By measuring the decay time constant of surface voltage, the calculated surface resistivity was compared with the value directly measured by a voltage-current method, so good agreement between two methods was obtained. It was observed that the plasma treatment led to decrease of the thermal activation energy of the surface conduction from 31.0 kJ/mol of untreated specimen to 21.8 kJ/mol. It is found that our results allow the examination of effects of plasma on electrical properties of PDMS.

• Journal of the Korean institute of surface engineering
• /
• v.41 no.5
• /
• pp.181-188
• /
• 2008

A.C. impedance properties of HA/Ti compound layer coated Ti-30Ta-($3{\sim}15$)Nb alloys have been studied by electrochemical method. Ti-30Ta binary alloys contained 3, 7, 10 and 15 wt% Nb were manufactured by the vacuum furnace system. And then specimen was homogenized at $1000^{\circ}C$ for 24 hrs. The sample was cut and polished for corrosion test and coating. It was coated with HA/Ti compound layer by magnetron sputter. The non-coated and coated morphology of Ti alloy were analyzed by X-ray diffractometer (XRD), energy X-ray dispersive spectroscopy (EDX) and filed emission scanning electron microscope (FE-SEM). The corrosion behaviors were investigated using A.C. impedance test (PARSTAT 2273, USA) in 0.9% NaCl solution at $36.5{\pm}1^{\circ}C$. Ti-30Ta-($3{\sim}15\;wt%$)Nb alloys showed the ${\alpha}+{\beta}$ phase, and $\beta$ phase peak was predominantly appeared in the case of increasingly Nb contents. The microstructures of Ti alloy were transformed from needle-like structure to equiaxed structure as Nb content increased. From the analysis of coating surface, HA/Ti composite surface uniformed coating layer with 750 nm thickness. The growth directions of film were (211), (112), (300) and (202) for HA/Ti composite coating on the surface after heat treatment at $550^{\circ}C$, whereas, the growth direction of film was (110) for Ti coating. The polarization resistance ($R_p$) of HA/Ti composite coated Ti-alloys were higher than those of the Ti and HA coated samples in 0.9% NaCl solution at $36.5{\pm}1^{\circ}C$. Especially, corrosion resistance of Ti-Ta-Nb system increased as Nb content increased.

• Journal of the Korean Ceramic Society
• /
• v.38 no.10
• /
• pp.928-935
• /
• 2001

In this study, two kinds of activated carbon fibers were prepared from PAN-based stabilized fibers by physical activation with steam. The variations in specific surface area, amount of iodine adsorption and pore size distribution of the activated carbon fibers after the activation process were discussed. The activated carbon fibers were prepared by two different methods, namely a 1- and 2-step method. For the 2-step method, carbonization of fibers in $N_2$ atmosphere was carried out to make carbon fibers and then activated by steam. In normal two step steam activation, BET surface area of about $1019m^2/g$ was obtained in the study. In the 1-step steam activation process, the carbonization and activation were simultaneously carried out. In the one step steam activation, BET surface area of $1635m^2/g$ was obtained after heat-treatment at $990^{\circ}C$. However, nitrogen adsorption isotherms for oxidized PAN based activated carbon fibers that were prepared by both methods were type I in the Brunauer-Deming-Deming-Teller (BDDT) classification even though they have different BET surface areas, amounts of iodine adsorption and pore size distributions.

• Journal of Biomedical Engineering Research
• /
• v.29 no.4
• /
• pp.316-322
• /
• 2008

The purpose of this study was to investigate muscle activation of lower extremity such as rectus femoris, tibialis anterior and soleus according to 0cm(bare foot), 4cm and 7cm heel height of shoe on the rocking surface in older women. 20 older women who did not have any lower musculoskeletal and neurological disorders in the past were participated in this study. Each subject was standing for 15 seconds on the level 8 of Biodex Stability System (BSS) while wearing 4cm and 7cm heel height shoes including bare foot. Electromyography was used to measure muscle activation of lower extremity, and the muscle activation was expressed as a percentage of maximal voluntary isometric contraction (% MVIC). We measured % MVIC of three muscles during 5 seconds except for the first 5 seconds and last 5 seconds. SPSS 12.0 program was used for this study. Repeated one-way analysis of variance(ANOVA) was performed to compare the significant difference among the muscles of lower extremities according to heel heights of shoe on the rocking plate. % MVIC of each muscle such as rectus femoris, tibialis anterior and soleus regarding heel heights of shoe had statistically significant differences (p<0.05). The results of contrast test were as follows; 1) % MVIC of rectus femoris had significant differences between barefoot and 4cm, and barefoot and 7cm. 2) % MVIC of tibialis anterior had significant differences between barefoot and 4cm, barefoot and 7cm, and 4cm and 7cm. 3) % MVIC of soleus had significant differences between barefoot and 7cm, 4cm and 7cm. The results indicate that all commonly responsive muscle on the conditions of barefoot, 4cm, and 7cm shoe height on the rcoking surface is tibialis anterior muscle. We found out that the more heels of shoe high, the more muscle activation increases. High-heeled shoes above 7cm remarkably increase the muscle activation of lower extremity and may result in muscle fatigue. Thus, these shoes may summate risk factors of falls in older women. We can acknowledge that the heels above 4 cm affect each muscle activation in lower extremity on the rocking surface.

• Physical Therapy Korea
• /
• v.26 no.4
• /
• pp.29-34
• /
• 2019

Background: The serratus anterior is one of the most important muscle for maintaining good scapular alignment in the shoulder joint. The pectoralis major and upper trapezius may also compensate for weak serratus anterior muscles. The push-up plus exercise has been identified as the optimal exercise for maximum activation of the serratus anterior. Objects: The purpose of this study was to examine differences in surface electromyography (EMG) activity of upper trapezius, pectoralis major, and serratus anterior muscles during push-up plus exercises on variously angled surfaces in subjects with winged scapula. Methods: Sixteen subjects with winged scapula (male=5, female=11) volunteered for this study. The subjects performed push-up plus exercise on four different tilt angles, namely $0^{\circ}$, $30^{\circ}$, $60^{\circ}$, and $90^{\circ}$. EMG activities in the serratus anterior, upper trapezius, and pectoralis major muscles during performance of push-up plus exercise were measured in all subjects. Data were processed from repeated measures one-way analysis of variance. Results: There was significant difference in the muscle activity of the serratus anterior on the different surface angles (p<.05). The results of the post-hoc analysis showed significantly greater serratus anterior muscle activity on a surface at a $0^{\circ}$ angle than at others tilt angles (p<.05). There was also significant difference in the ratio of serratus anterior to upper trapezius and serratus anterior to pectoralis major across the four surfaces (p<.05), and post-hoc analysis showed significantly greater values on the $0^{\circ}$ surface than on other tilts (p<.05). Conclusion: This study found that performing push-up plus exercises on a flat surface with $0^{\circ}$ and $30^{\circ}$ tilt angle achieves high activation of the serratus anterior muscle for selective strengthening. It can also take into account the sequential application, which is first performed at a $30^{\circ}$ and at a $0^{\circ}$ tilt angle for and effective but not excessive muscle activation.

• Journal of Energy Engineering
• /
• v.13 no.2
• /
• pp.166-172
• /
• 2004

The activated carbon was produced from Sancheong bamboo by steam and carbon dioxide gas activation methods. The carbonization of raw material was conducted at 90$0^{\circ}C$ and gas activation reactions were conducted with respect to various conditions. -activation temperature 750-90$0^{\circ}C$, the flow rate of steam 0.5-2g-$H_2O$/g-char$.$hr, the flow rate of carbon dioxide 5-30$m\ell$-$CO_2$/g-char-min and activation time 1-5 hr. The prepared activated carbons were measured yield, the adsorption capacity of iodine and methylene blue, BET specific surface area and pore size distribution. The adsorption capacity of iodine (680.5-1526.1 mg/g) and methylene blue (18.3-221.5 mg/g) increased with creasing activation temperature and activation time. The adsorption capacity of iodine and methylene blue increased with the activation gas quantity in the range of 0.5-1.5g-$H_2O$/g-charㆍhr, 5-18.9$m\ell$-Co$_2$/g-charㆍmin. But those decreased over those range due to the pore shrinkage. The steam activation method was superior in efficiency to carbon dioxide activation method.

• Polymer(Korea)
• /
• v.36 no.3
• /
• pp.321-325
• /
• 2012

In this work, we prepared the activated graphite nanofibers (A-GNFs) via chemical activation with KOH/GNFs ratios in a range of 0 to 5. The effect of KOH activation was studied in the surface and pore properties of the samples for electrochemical performance. The surface properties of A-GNFs were characterized by XRD and SEM measurements. The textural properties of the A-GNFs were investigated by $N_2$/77 K adsorption isotherms using Brunauer-Emmett-Teller (BET) equation. Their electrochemical behaviors were investigated by cyclic voltammetry and galvanostatic charge-discharge performance. From the results, electrochemical performances of the A-GNFs were improved with increasing the ratio of KOH reagent. It was found that specific surface area and total pore volume of the A-GNFs were increased by KOH activation.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2015.11a
• /
• pp.138-138
• /
• 2015

In this study, highly ordered nanotubular surface of Ti-25Ta-xHf alloys for dental applications was researched. Ti-25Ta-xHf alloys were contained from 0% to 15% Hf content. Formation of nanotubular structure was achieved by an electrochemical method in 1M $H_3PO_4$ electrolytes containing 0.8%wt. % NaF.

• Carbon letters
• /
• v.8 no.1
• /
• pp.30-36
• /
• 2007

Oxidized PAN (OXI-PAN) fibers were used for the precursors of activated carbon fiber in study. How drying temperature affected the properties of carbon fibers on activating process of carbon fibers was investigated. The specific surface areas of activated carbon fibers have been determined on a series of chemically activated carbons with KOH and NaOH. The experimental data showed variations in specific surface area, iodine and silver adsorptions by the activated carbon fibers. The amount of iodine adsorption increases with increasing specific surface areas in both activation methods. This was because the ionic radius of iodine was smaller than the interior micropore size of activated carbon fibers. Silver adsorbed well in NaOH activated carbon fibers rather than KOH activated carbon fibers in this study.

• Journal of the Korean institute of surface engineering
• /
• v.32 no.3
• /
• pp.393-400
• /
• 1999

The surface characteristics of nitrogen ion implanted iron aluminides were investigated using various electrochemical methods in $H_2$$SO_4$+KSCN and HCl solutions. Nitrogen ion implantation was performed with doses of $3.0$\times$10^{17}$ /ions/$\textrm{cm}^2$ at an energy of 150keV. Nitrogen ion implanted iron aluminides increased the corrosion potential and significantly decreased grain boundary activation, the active current density, and passive current density. Nitrogen implanted iron aluminides with Mo increased the corrosion, pitting potential, repassivation potential and │$E_{pit}$-$E_{corr}$│ value. Whereas, implanted iron aluminides containing boron reduced the pitting and repassivation potential in comparison with nitrogen implanted iron aluminides with Cr and Mo.o.