• Geomechanics and Engineering
• /
• v.22 no.3
• /
• pp.265-275
• /
• 2020

As a flexible supporting structure, the anchoring frame structure is widely adopted to support multistage slopes in high earthquake-intensity area for its effectiveness and practicality. The previous study indicates that the anchor of anchoring frame structure is the most likely to be damaged during earthquakes. It is crucial to determine the pull-out capacity of anchor against seismic force for the seismic design of anchoring frame structure. In this study, an analytical model of a three-stage slope supported by anchoring frame structure is established, and the upper bound method of limit analysis is applied to deduce the seismic anchor force of anchoring frame structure. The pull-out capacity of anchor against seismic force of anchoring frame structure at each stage is obtained by computer programming. The proposed method is proved to be reasonable and effective compared with the existing published solution. Besides, the influence of main parameters on the pull-out capacity of anchor against seismic force is analyzed to provide some recommendations for the seismic design of anchoring frame structure.

• Journal of the korean Society of Automotive Engineers
• /
• v.8 no.4
• /
• pp.66-72
• /
• 1986

Numerical analysis has been made on the dynamic behavior of a supporting structure subjected to a force of time dependent frequency. The effect of solid viscosity is studied when the frequency of external force passes through the first critical frequency of the simple beam for four times. Within the Euler-Bernoulli beam theory, the solutions are obtained by using finite Fourier and Laplace transformation methods with respect to space and time variables. The result shows that the maximum value of the dynamic deflection is considerably affected by the value of the solid viscosity as well as the frequency difference The maximum dynamic deflection is found to occur in the frequency lower limit C of 0.85-0.985 in the presence of the solid viscosity.

• The Journal of Korean Academy of Prosthodontics
• /
• v.36 no.1
• /
• pp.150-165
• /
• 1998

For the purpose of evaluating the effect of both direct retainer design and bony absorption degree around abutment of indirect retainer on the supporting tissue of abutment of indirect retainer, dislodging force was transmitted to unilateral distal extension RPD bases. Analysis of stress distributed within the supporting tissue around abutment of indirect retainer was carried out. Using three-dimensional photoelastic stress analysis method and the conclusion is a follows. 1. According to the extent of force which the direct retainer of the most distal abutment tooth, the amount of force transmitted to the abutment tooth of indirect retainer was small. 2. Of all the cases, Mandibular first premolar which was used abutment tooth of indirect retainer, buccal, mesial and distal sides represented compression stress and lingual side represented tensile stress. 3. The more bone resorption of abutment tooth of indirect retainer, the more distortion of buccal and distal side of abutment tooth was existed and the extent of compression stress which was existed and distal side to abutment tooth was large. 4. When the alveolar bone around the abutment with indircet retainer is normal. The amount of force transmitted on abutment with indirect retainer was small in the order of Akers clasp, RPA clasp, RPI clasp. 5. When the alveolar bone around the abutment with indirect retainer has been absorbed 20% and 30%, the amount of force transmitted on abutment with indirect retainer was small in the order of RPA calsp, RPI clasp, Akers clasp. 6. When denture is displaced, shape of the direct retainer reciprocating abutment affect much the function of indirect retainer.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.27 no.4
• /
• pp.601-607
• /
• 2003

The column type is used as the sensing element of the load cell to measure the large force in the range of 10$^4$~ 10$^{7}$ N. However. it is not easy to handle the load with large capacity due to its size. It is, therefore, necessary to design a compact load cell with a low aspect ratio. Thus this paper showed the characteristic evaluation of compact load cell with respect to the shape of supporting plate. The supporting plate of the load cell was an annular type with inner(D$_{i}$) and outer(D$_{o}$) diameters. Using the strain distribution obtained from FEM. the supporting plate was designed to get the stable output voltage of the load cell. The three designed supporting plates were manufactured, and the result of characteristic experiment of the load cell, using the 10 MN hydraulic force standard machine, was compared with FEM.M.M.

• Journal of Periodontal and Implant Science
• /
• v.35 no.2
• /
• pp.371-381
• /
• 2005

The masticatory function of tooth is maintained by the periodontal health, and periodontal health is also maintained by the masticatory function. Bite forces are withstanded by the PDL, and this thought to be through the viscoelastic theory. Mobility test and Bite force test are used to evaluate the viscoelastic theory of the PDL. In this study, the bite force test was used. In the same conditions of quantity of the supporting tissue, the maximum bite force according to the quality of the supporting tissue was evaluated. The study was conducted on 40 patients with moderate adult periodontitis, who were indications to the modified widman flap treatment. The maximum bite force in the premolar and molar regions were tested before treatment, 3weeks and 4 weeks after treatment. and the results were as follows. 1. In the premolar region, 3 weeks and 4 weeks after treatment showed higher maximum bite force than before treatment. And in the molar region the maximum bite force decreased 3 weeks after treatment, but increased after 4 weeks, compared to before treatment. 2. In the 1st premolar, there were only significant difference between before and 3 weeks after treatment, and between and 4 weeks after treatment. 3. In the 2nd premolar, there were only significant difference between before and 3 weeks after treatment, and between and 4 weeks after treatment. 4. In the 1st molar, there were no significant difference between before, 3 weeks after treatment, 4 weeks after treatment. 5. In the 2nd molar, there were no significant difference between before, 3 weeks after treatment, 4 weeks after treatment. From the results above, it shows that there were improvements in the maximum bite force through specific periodontal treatments, and thus it can be considered in clinical situations, that selection of the prosthodontic material, decisions of extraction, evaluation of the prognosis after periodontal treatment is a helpful method.

• Journal of Technologic Dentistry
• /
• v.42 no.2
• /
• pp.99-105
• /
• 2020

Purpose: A study analysed the stress distribution of abutment screw and supporting bone of fixture by the tightening torque force of the abutment screw within clinical treatment situation for the stability of the dental implant prosthesis. Methods: The finite element analysis was targeted to the mandibular molar crown model, and the implant was internal type 4.0 mm diameter, 10.0 mm length fixture and abutment screw and supporting bone. The occlusal surface was modeled in 4 cusps and loaded 100 N to the buccal cusps. The connection between the abutment and the fixture was achieved by combining three abutment tightening torque forces of 20, 25, and 30 Ncm. Results: The results showed that the maximum stress value of the supporting bone was found in the buccal cortical bone region of the fixture in all models. The von Mises stress value of each model showed 184.5 MPa at the 20 Ncm model, 195.3 MPa in the 25 Ncm model, and 216.5 MPa in the 30 Ncm model. The contact stress between the abutment and the abutment screw showed the stress value in the 20 Ncm model was 201.2 MPa, and the 245.5 MPa in the 25 Ncm model and 314.0 MPa in the 30 Ncm model. Conclusion: The increase of tightening force within the clinical range of the abutment screw of the implant dental prosthesis was found to have no problem with the stability of the supporting bone and the abutment screw.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2010.03a
• /
• pp.1382-1387
• /
• 2010

A 3D FEM numerical analysis was performed to observe the changes of supporting system of a old 1-lane tunnel when it is enlarged to 2-lane, 3-lane and 4-lane. The standard Type-III supporting pattern was applied to the new tunnel because the ground was assumed as Type-III. The observation was carried out at the middle supporting system of the old 1-lane tunnel alignment. The results shows that the changes of old tunnel supporting system began when the new tunnel was excavated at 2D(D is the equivalent diameter of 1-lane tunnel) behind of the observation place and became very rapid from 1D.

• Korean Journal of Applied Biomechanics
• /
• v.23 no.2
• /
• pp.131-139
• /
• 2013

Naejirgi is one of the fastest, most forceful and most often being used kicks in Taekkyon games, The purpose of this study was to investigate kinetic factors on two types of Naejirgi kick, one of which uses knee bending of supporting leg and the other uses little it. 12 taekkyoners (11 males and one female) who are the students of Y University participated in this study. They have been practicing on Taekkyon for five years or more. Positions of CoM, the elapsed time of each phase, vertical ground reaction forces, joint moments and impulses of supporting leg were analyzed for this study. The results were as follows; in Naejirgi with knee bending of supporting leg than without knee bending of supporting leg, the vertical motion range of whole body CoM was larger during phase 2 and 3, the elapsed time of phase 4 were longer, players stayed longer in the nearest location to opponent, during phase 4 the vertical ground reaction forces of supporting foot were larger, and joint extension moments and angular impulses of supporting leg (especially knee) were larger. In conclusion supporting knee bending is not a useful strategy for Naejirgi, because players stay longer in the nearest position to opponent and consumed more muscle force and energy for producing the vertical momentum which is unnecessary for pushing down the opponent.

• Journal of KIISE:Computer Systems and Theory
• /
• v.32 no.6
• /
• pp.314-323
• /
• 2005

This paper proposes a real-time 3D visualization system for situational awareness of Air force operations. This 3D system of situational awareness supports a high-level commander of Air force during the war game operations. These situation aware supporting data such as the aircraft track data of radar, aircraft schedule database, map and satellite image data are integrated into one structured data and those are visualized as 3D structure. By using an Out-of-Core method, we can visualize a 3D huge data in real-time in mobile notebook environment. The experiment shows several examples of 3D visualization supporting situation awareness for Air force operation.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.26 no.4
• /
• pp.406-411
• /
• 2016

The natural frequencies and mode shapes of a system composed of subsystems on a supporting structure have been derived approximately. The system is modeled as a discrete system, and it is assumed that the masses of subsystems are much smaller than the mass of a supporting structure. It has been found that the fundamental frequency corresponds to the supporting structure, and each higher frequency corresponds to each subsystem. A relation between the vibration amplitudes of the supporting structure and subsystems is also derived for the case when the supporting structure is excited by a harmonic force.