• 건축역사연구
• /
• 제29권1호
• /
• pp.39-49
• /
• 2020

A dapo type bracket system which consists of chuganpo(柱間包) and chusangpo(柱上包) with a fake-beam adopted a nemok-dori member to cope with oemok-dori member in order to obtain balance between the outer-side and the inner-side of the bracket system. The middle part of the longest rater in the dapo system is supported by three points made by oemok-dori, jusim-dori and nemok-dori members and the area between the rafer supporting points forms a supporting area. The increase of rafter supporting points and supporting area leads to heightening the structural stability and the efficiency of load delivery. In the eave of dapo system the portion where the three supporting points formed by oemok-dori, jusim-dori and nemok-dori members shows as 33% in the early period, 71% in the middle period and 78% in the later period. On the contrary the portion where more than one of the three dori members were omitted shows as 67% in the early period, 29% in the middle period and 22% in the later period. This is the result of the increase of the number and the distance of steps in the dapo bracket system as time goes on. This is because the structural role of three supporting points becomes important as the increase of distance between the dori members leads to the increase of load which burdens on each dori member.

• 한국정밀공학회지
• /
• 제25권5호
• /
• pp.69-76
• /
• 2008

Inner diameter of bearing race is automatically measured by complete inspection system after grinding process. Contact type three points supporting method is widely applied to automatic inner diameter measurement because of its excellent stability. However, the geometric consideration regarding three points supporting method is not sufficient. In this study, the error equation from geometric error analysis of three points supporting method is found. The effect of factors in the error equation is also investigated. The error equation is linear for difference of diameter in sample and master on range of tolerance. An error becomes more and more larger, when the distance of two supporting balls or the diameter of supporting ball are increased. In the result, some considerations are proposed for measurement of inner diameter by the three points supporting method.

• 영어어문교육
• /
• 제10권1호
• /
• pp.127-152
• /
• 2004

The purpose of this study is to elaborate design strategies for a Web-based self-directed cooperative distance language learning community. Research was done regarding the theoretical foundations for self-directed cooperative language learning and Web-based learning communities. The components of a Web-based community for self-directed cooperative language learning system are also investigated. As a result of this study, design strategies for Web-based communities are suggested. There are performance and supporting environments(synchronous/asynchronous) for self- directed cooperative language learning. There are also cultural experiences and communication factors in the performance field. Furthermore, matching communicators, finding and offering information, language learning content and other supporting agents are important in the supporting environment.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1999년도 춘계학술대회논문집
• /
• pp.18-21
• /
• 1999

In this study in order to make doubly-curved sheet metal effectively a sheet metal forming process has been developed by adopting the flexibility of the incremental forming process and the principle of bending deformation which causes slight deformation to thickness The developed process is an unconstrained forming process with no holder. For this study the experimental equipment is set up with the punch-set which consists of two pairs of lower support-punches and one upper center-punch. In the experiments using aluminum sheet it is found that the curvature of the formed sheet metal is determined by controlling the distance between supporting punches in pairs and the forming depth of the center-punch. and the edge-forming method is proposed for forming the sheet metal into the balanced shape. The equation using process variables such as the distance between supporting punches in pairs and the forming depth of the center-punch is proposed for the prediction of the radii of curvatures of the formed shape and it is corrected by the experimental results and the FEM simulation results about whether springback takes place. It is found that according o the simulation there is a certain set of the distance between a pair of supporting punches and the forming depth of the center-punch which causes a little springback. It is thus shown that the radii of curvatures of the formed sheet metal can be predicated by the corrected equation unless significant springback occurs.

• 공학교육연구
• /
• 제14권3호
• /
• pp.61-71
• /
• 2011

Korea has introduced the levy-grand system in the vocational learning finance. The standard unit price system of training cost was utilized in the distribution of training budget and the reimbursement system including total or partial training cost return has been operated in the corporate training after completing the learning course particularly. The standard unit price was calculated in the base of analyzing on supporting budget by the government per training institutions and corporate payment decision to learning institutions. The proposing standard unit price system of training cost was analyzed in the current standard price unit of training cost and then an improvement policy and the implication are derived from it. At the result of this study, the current government supporting level to e-learning and postal distance learning indicates good status.

• 한국멀티미디어학회논문지
• /
• 제4권5호
• /
• pp.430-438
• /
• 2001

본 논문에서는 공동 브라우징을 지원하는 웹 기반의 동기적 원격 학습 시스템의 설계와 구현 내용을 소개한다. 본 논문에서 제안하는 시스템은 학사관리 시스템, 화이트보드 시스템, 화상 회의 시스템, 공동 브라우징 시스템, 그리고 세션 관리자로 구성되어 있다. 본 시스템을 구성하는 시스템 중 공동 브라우징 시스템은 다른 원격학습 시스템에서 찾아보기 어려운 독특한 시스템이다. 우리의 공동 브라우징 시스템은 상용 웹 브라우저에서 실행되며, 교사가 교육에 필요한 웹사이트들을 이동할 때 교사의 웹 브라우저의 내용을 그대로 사용자에게 동기화 되어 보여줌으로써 마치 학습자 자신이 웹 서핑을 하는 것처럼 느끼게 해준다. 세션 관리자는 멀티유저와 멀티그룹을 지원하며 화이트보드, 화상회의, 공동 브라우징 시스템 등의 다양한 원격 학습 컴포넌트들이 같은 세션 정보를 가질 수 있게 하여 하나의 원격학습 시스템으로 통합될 수 있게 한다. 본 시스템은 공동 브라우징 등 여러 가지 동기적인 기능을 지원하여 원격 학습의 효율을 증진시키고, 마치 동일한 강의실에서 학습하고 있는 듯한 효과를 얻을 수 있게 해준다.

• 한국응용과학기술학회지
• /
• 제40권6호
• /
• pp.1249-1258
• /
• 2023

본 연구의 목적은 YBT(Y-balance test) 시 지지발의 COP 변인이 활동발의 상대도달거리와 종합점수에 미치는 영향을 밝히는 것이다. 연구의 대상자로 20대 성인 남성 26명(연령: 24.4±3.0 년, 신장: 171.0±10.5 cm, 체중: 72.1±12.1 kg 다리길이: 88.2±5.8 cm)이 연구에 참여하였다. 연구의 측정도구인 YBT를 통하여 활동발의 상대도달거리, 종합점수, 지지발의 COP 변인들을 좌우발에서 측정하여 결과를 도출하였다. YBT 시 지지발의 COP 변인이 상대도달거리와 종합점수가 미치는 영향을 알아보기 위하여 다중회귀분석을 이용하였다. 이에 따른 연구결과로, YBT 동안 오른발 지지 시 후외측 방향에서 전후, 좌우 COP속도, COP속도의 영향이 크고, 왼발 지지 시 후내측 방향에서 전후, 좌우 COP속도, COP속도의 영향으로 상대도달거리 및 종합점수를 향상시켰다.

• Physical Therapy Rehabilitation Science
• /
• 제9권4호
• /
• pp.275-280
• /
• 2020

Objective: Compression wear is an external aid which promotes performance and recovery, diminishes muscular microtrauma, reduces muscle fiber recruitment, improves neuromechanics, enhances coordinative activities, and reduces the perceived exertion. The purpose of this study was to investigate the relationship between athletic taping and compression wear on dynamic postural balance in healthy young men. The hypothesis was that the athletic taping and compression wear would affect dynamic postural balance, with athletic taping having a different effect on dynamic postural balance in healthy young adults. Design: Cross-sectional study. Methods: Thirty-seven healthy young men participated in this study. To examine the association between athletic taping and compression wear, 3 clinical measurement tools, including 5 times sit-to-stand (5xSTS), one-leg standing (OLS) test, and Y-balance test (YBT) in 5 different conditions, namely (1) non-supporting, and support with (2) athletic taping, (3) regular compression wear, (4) silicon compression wear, and (5) double-fiber compression wear were used. Results: The distance of the Y-balance test (YBT) on both the dominant and non-dominant sides showed a statistically difference among the 5 supporting conditions (p<0.05). The distance measured via the YBT in the non-support condition was significantly different than that in the other four supporting conditions (p<0.05). However, 5xSTS and OLS were not significantly different in these supporting conditions. Conclusions: The results of this study suggest that athletic taping, silicon compression wear, and double-fiber compression wear were more effective for dynamic balance than non-supporting and regular compression wear.

• 한국컴퓨터정보학회논문지
• /
• 제3권2호
• /
• pp.125-130
• /
• 1998

21C를 바라보는 한국사회의 최대과제 중 하나는 정보사회를 향한 교육의 완성이며, 이는 교수학습 환경의 변화에 따른 새로운 교수학습 정보 지원체제를 요구하고 있다. 그럼에도 우리의 교육 현실은 효과적인 교수학습 정보지원체제의 부족으로 인한 많은 문제점을 안고 있다. 특히 교육을 지원하기 위한 교수˙학습자료 개발 노력은 매우 미미하며, 인터넷의 교육적 활용이 사회적 이슈가 되고 있음에도 학생들에게 제공되어야 할 정보와 지식베이스는 준비되어 있지 않다. 따라서 본 논문에서 제시할 초고속 정보통신망을 이용한 WWW 기반의 원격교육용 멀티미디어 학습자료의 모델링은 교육용 멀티미디어 데이터베이스를 형성하는데 좋은 기초가 될 것이다.

• 소성∙가공
• /
• 제13권2호
• /
• pp.122-128
• /
• 2004

In order to make a doubly-curved sheet metal effectively, a sheet metal forming process has been developed by adopting the flexibility of the incremental forming process and the principle of bending deformation which causes slight deformation in thickness. The developed process is an unconstrained forming process with no holder. For this study, the experimental equipment is set up with the roll set which consists of two pairs of support rolls and one center roll. In the experiments using aluminum sheets, it is found that the curvature of the formed sheet metal is determined by controlling the distance between supporting rolls in pairs and the forming depth of the center roll and it also depends on the thickness of the sheet metal. In order to check the effect of process parameters on the generation of sheet metal curvatures in this process, the orthogonal array is adopted. From the experimental results, among the process parameters, the distance between supporting rolls in pairs along the direction of one principal radius of curvature as well as the forming depth and the thickness of the material is shown to influence the generation of curvature in the same direction significantly. That is, the other distance between supporting rolls in pairs which are not located in the same direction of one principal radius of curvature, does not have an significant effect on the generation of the curvature in that direction. It mainly affects the generation of curvature in its own direction with the forming depth and the thickness of the material.