• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2010년도 추계학술대회 논문집
• /
• pp.847-848
• /
• 2010

• Bulletin of the Korean Chemical Society
• /
• 제31권11호
• /
• pp.3283-3290
• /
• 2010

The gas-phase dehydration of glycerol to acrolein was carried out over 10 wt % HSiW catalysts supported on different supports, viz. $\gamma-Al_2O_3$, $SiO_2-Al_2O_3$, $TiO_2$, $ZrO_2$, $SiO_2$, AC, $CeO_2$ and MgO. The same reaction was also conducted over each support without HSiW for comparison. Several characterization techniques, $N_2$-physisorption, thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), the temperature-programmed desorption of ammonia ($NH_3$-TPD), temperature-programmed oxidation (TPO) with mass spectroscopy and CHNS analysis were employed to characterize the catalysts. The glycerol conversion generally increased with increasing amount of acid sites. Ceria showed the highest 1-hydroxyacetone selectivity at $315^{\circ}C$ among the various metal oxides. The supported HSiW catalyst showed superior catalytic activity to that of the corresponding support. Among the supported HSiW catalysts, HSiW/$ZrO_2$ and HSiW/$SiO_2-Al_2O_3$ showed the highest acrolein selectivity. In the case of HSiW/$ZrO_2$, the initial catalytic activity was recovered after the removal of the accumulated carbon species at $550^{\circ}C$ in the presence of oxygen.

• Advances in aircraft and spacecraft science
• /
• 제3권4호
• /
• pp.471-502
• /
• 2016

This paper presents the dynamic instability analysis of un-damped elastically supported piezoelectric functionally graded (FG) beams subjected to in-plane static and dynamic periodic thermomechanical loadings with uncertain system properties. The elastic foundation model is assumed as one parameter Pasternak foundation with Winkler cubic nonlinearity. The piezoelectric FG beam is subjected to non-uniform temperature distribution with temperature dependent material properties. The Young's modulus and Poison's ratio of ceramic, metal and piezoelectric, density of respective ceramic and metal, volume fraction exponent and foundation parameters are taken as uncertain system properties. The basic nonlinear formulation of the beam is based on higher order shear deformation theory (HSDT) with von-Karman strain kinematics. The governing deterministic static and dynamic random instability equation and regions is solved by Bolotin's approach with Newmark's time integration method combined with first order perturbation technique (FOPT). Typical numerical results in terms of the mean and standard deviation of dynamic instability analysis are presented to examine the effect of slenderness ratios, volume fraction exponents, foundation parameters, amplitude ratios, temperature increments and position of piezoelectric layers by changing the random system properties. The correctness of the present stochastic model is examined by comparing the results with direct Monte Caro simulation (MCS).

• 분석과학
• /
• 제12권3호
• /
• pp.224-229
• /
• 1999

최근 캐리어를 이용한 액체막의 연구가 대단히 활발하다. 항생물질의 모넨신을 사용하여 옥타놀의 유기용매에 용해시켜 양이온교환막을 제조하였다. 이막의 평가를 Nernst-Planck식과 Fick식으로 막전위와 물질의 투과선택도를 분석하였다. 사용한 알카리이온의 농도에 대한 높은 투과선택성을 확인하였고, 시간에 따른 이온농도값은 선형관계를 알았다. 그러나 이온의 높은농도에서 변화량은 선형이 아니였다. 이를 위한 해석은 정지층(Stagnent Layer)을 하나 더 도입하여 업 - 힐 수송에서 직선관계를 얻었다.

• 대한화학회지
• /
• 제55권4호
• /
• pp.666-672
• /
• 2011

Vanadium 치환체인 polyoxometalate 1, [Cu(2,2'-bipy)]$[Cu(2,2'-bipy)_2]_2[PMo_8V_6O_{42}]{\cdot}1.5H_2O$을 가지고 있는 inorganicorganic complex의 촉매 활성도를 Biginelli 반응에 적용하여 연구하였다. Dihydropyrimidinones를 one-pot 합성하는 반응에서, $H_3PMo_{12}O_{40}$ 촉매 보다[Cu(2,2'-bipy)]$[Cu(2,2'-bipy)_2]_2[PMo_8V_6O_{42}]{\cdot}1.5H_2O$ 촉매가 더 좋은 결과를 나타내었다.

• Journal of Electrochemical Science and Technology
• /
• 제13권4호
• /
• pp.417-423
• /
• 2022

With the emerging importance of catalysts for water electrolysis, developing efficient and inexpensive electrocatalysts for water electrolysis plays a vital role in renewable hydrogen energy technology. In this study, a 1nm thickness of TiC-supported Ru catalyst for hydrogen evolution reaction (HER) has been successfully fabricated using an electron (E)-beam evaporator and thermal decomposition of gaseous CH₄ in a furnace. The prepared Ru/TiC catalyst exhibited an outstanding performance for alkaline hydrogen evolution reaction with an overpotential of 55 mV at 10 mA cm^-2. Furthermore, we demonstrated that the outstanding HER performance of Ru/TiC was attributed to the high surface area of the support and the metal-support interaction.

• 대한치과보철학회지
• /
• 제33권2호
• /
• pp.177-197
• /
• 1995

The endodontically treated tooth is generally restored with post & core, owing to the brittleness and the loss of large amount of tooth structure. Although there have been lots of studies about the endodontically treated teeth, the three-dimensional quantitative studies about the strees distribution of them are in rare cases. In this study, it was assumed that the coronal portion of the upper incisou had severely damaged. After the root canal therapy it was post cored, and restored with PFM crown, for this experiment nine types of model were constructed : 1); long, 2); medium, 3); short gold post for the roots supported with a narmal alveolar bone, 4); long, 5); medium, 6); short gold post for the roots supported with an alveolar bone resorbed to its 1/3 of root length, 7); long, 8); medium, 9); short base metal post for the roots supported with an alveolar bone resorbed to its 1/3 of root length. Force was applied from two directions. One was functional maximum bite force(300N) applied to the spot just lingual to the incisal edge with the angle of 45 degrees to the long axis of the tooth, and the other one was horizontal force(300N) applied to the labial surface. The results analyzed with three-dimensional finite element method were as follows : 1. Stress was concentrated on the middle portion of the labial side dentin of the root and the lingual portion of the apical dentin of the root. Stress in the post showed maximum value at 2 mm above the post apex. 2. In case of the long post and base metal post, strees was concentrated on the apex of the root and the post. 3. In case of the longer post, the displacement on the post-cement interface was lessened. The gold post was more displaceable than the base metal post. 4. In case of the alveolar bone resorption, stress concentrated on the root and the post and displacement on the post-cement interface were increased.

• 한국산학기술학회논문지
• /
• 제13권7호
• /
• pp.3261-3266
• /
• 2012

수소발생 및 저장 물질로서 붕수소화나트륨($NaBH_4$)은 촉매 분해반응을 통하여 수소를 생성할 수 있는데, 이 프로타이드 화합물을 이용하여 가정용 또는 이동용 연료전지의 수소를 공급할 수 있어서, 이 화합물과 분해반응에 대한 연구가 많이 수행되고 있다. 본 연구에서는 알칼리성 $NaBH_4$ 수용액을 귀금속이 담지된 금속산화물 촉매를 이용하여 가수분해반응을 일으키고, 그 분해반응 산물인 수소의 발생량을 측정하였다. 지지체로 사용한 금속산화물의 종류를 비교하고, 함침된 귀금속으로서 백금과 루테늄을 비교하였으며, 촉매사용량, $NaBH_4$ 용액의 농도 등의 영향을 고찰하고, 수소 발생 패턴을 조사하였다.

• 한국수소및신에너지학회논문집
• /
• 제31권5호
• /
• pp.419-428
• /
• 2020

The kinetics of direct methanation over activated charcoal-supported molybdenum catalyst at 30 bar was studied in a cylindrical fixed-bed reactor. When the temperature was not higher than 400℃, the CO conversion increased with increasing temperature according to the Arrhenius law of reaction kinetics. While XRD and Raman analysis showed that Mo was present as Mo oxides after reduction or methanation, TEM and XPS analysis showed that Mo₂C was formed after methanation depending on the loading of Mo precursor. When the temperature was as high as 500℃, the CO conversion was dependent not only on the Arrhenius law but also on the catalyzed reaction by nanoparticles, which came off from the reactor and thermocouple by metal dusting. These nanoparticles were made of Ni, Fe, Cr and alloy, and attributed to the formation of carbon deposit on the wall of the reactor and on the surface of the thermocouple. The carbon deposit consisted of amorphous and disordered carbon filaments.

• 한국자기공명학회논문지
• /
• 제6권1호
• /
• pp.38-44
• /
• 2002

60% Pt on Vulcan XC-72 with similar Pt sizes to fuel cell grade Pt black was investigated by $\^$13/C nuclear magnetic resonance spectroscopy (NMR), cyclic voltammery (CV), transmission electron microscopy (TEM). Experiments were carried out on electrochemically cleaned samples as well as as-received. The TEM and CV results showed that the average particle sizes were changed by cleaning. However, the chemical shift （$\delta$$\_$G/） of $\^$13/C of $\^$13/CO absorbed on Pt surfaces did not show any appreciable variation with particle size change as did in Pt black. These results indicate that a combination of different analytic techniques is essential to understand the properties of the metal particle catalysts and that the presence of carbon black support strongly influences the NMR data, probably through metal-support interaction.