• Proceedings of the Korea Water Resources Association Conference
• /
• 1993.07a
• /
• pp.3-26
• /
• 1993

I have briefly described some of the important advances in hydrosystems and to remark on the important scientific research priorities in hydrological sciences. We have concentrated on data collection systems, real-time control of hydrosystems, global climate change and decision support systems and GIS. In summary, I would like to stress the following points: - the advances in data collection systems, advanced methodologies for interfacion hydrologic, hydraulic, and optimization models through optimal control approaches; and the advances in decision support systems and GIS will allow the interfacing of all these technologies into some sophisticated and much needed tools for operating hydrosystems; - the ability to better understand the hydrologic processes and their relationships to other earth processes is important to understanding and modelling of the hydrologic cycle and its interactions with the ocean-atmosphere system; - and the solution to a better understanding of hydrologic sciences needs to be an international effort such as the GEWEX program briefly discussed above. I would like to thamk each of you for listening to my lecture and to once again thank those responsible for me being here today. Thank you.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.17 no.9
• /
• pp.785-796
• /
• 2007

This study offers a design procedure of optimum cable damper for multi-mode vibration control with nonlinear damper and also investigates the relation between mode and amplitude dependency. The proposed multi-mode damping index, which is defined as a potential energy loss ratio of cable vibration, is a main component of optimization problem of optimum nonlinear damper. In order to include the amplitude dependency of nonlinear damper, three types of multi-mode patterns such as ambient vibration, support excitation and rain-wind induced vibration are assumed. The optimum damper exponent depends on amplitude patterns. In case of ambient vibration, optimum factor is less than 0.5 and in case of support excitation or rain-wind induced vibration it is between 0.5 and 1.0.

• Korean Journal of Computational Design and Engineering
• /
• v.15 no.6
• /
• pp.467-475
• /
• 2010

Due to the needs of design optimization and productivity for modernized Korean traditional house, standardization of Korean traditional building components is proceeding by BIM (Building Information Modeling). Currently, most of BIM software support object-based parametric modeling. By means of parameterized Korean traditional building components, the shape and assembly relation can be controlled. Although IFC(ISO/PAS 16739), which is an international standard in the AEC field, has been developed for information exchange among BIM software, IFC and other existing common data formats cannot be exchangeable parametric information. For the exchangeable parametric information within IFC, the authors defined meta-data by using Pset(Property-Set). The authors analyzed results about interoperability test in Revit $Architecture^{TM}$, $ArchiCAD^{TM}$ and Digital $Project^{TM}$. In order to solve found problems, the authors developed a translator to improve interoperability among BIM software.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.2 no.2
• /
• pp.99-105
• /
• 2007

MANET(Mobile Ad-hoc network) have recently attracted a lot of attention in the research community as well as in industry. Although the previous research mainly focused on various of MANET in routing, we consider, in this paper, how to efficiently support applications such as variable geocasting basd on MANET. The goal of a geocasting protocol is deliver data packet to a group of nodes that are located within a specified geocasting region. Previous research that support geocast service in mobilie computing based on MANET have the non-optimization problem of data delivery path, overhead by frequent reconstruction of the geocast tree, and service disruption problem. In this paper, we propose the mobility pattern based geocast technique using variable service range according to the mobility of destination node and resource reservation to solve this problem. The experimental results show that our proposed mechanism has improved performance of Accessibility & Network Overhead than previous research.

• Proceedings of the KIEE Conference
• /
• 2006.07c
• /
• pp.1378-1379
• /
• 2006

Carbon nanotubes (CNTs) with few defects and very small amount of amorphous carbon coating have been synthesized by catalytic decomposition of acetylene in $H_2$ over well-dispersed metal particles supported on MgO. The yield, quality and diameters of CNTs were obtained by control of catalyst metal compositions to be used. The optimization condition of carbon nanotubes with high yield is when Co and Mo are in a 1:1 ratio and Fe metal contents to Co is increased on magnesium oxide support. It is also found that the diameter of the as-prepared CNTs can be controlled mainly by adjusting the molar ratio of Fe-Mo, Co-Fe, and Co-Mo versus the MgO support. Our results indicated that desired diameter distribution of CNTs is obtained by choosing or combining the catalyst to be employed.

• Proceedings of the Korean Information Science Society Conference
• /
• 2004.04b
• /
• pp.592-594
• /
• 2004

본 논문에서는 SVM의 효과적인 학습 알고리즘인 SMO(Sequential Minimal Optimization)를 하드웨어적으로 설계하고 구현하는 방법을 제시한다. SVM은 Vapnik에 의한 제안된 기계학습 방법으로 음성인식, 문자인식, BT, 보안 등 다양한 응용분야에서 기존의 신경망보다 우수한 성능을 나타내었다. 그러나 SVM은 계산량이 많아 연산속도가 느려지는 단점을 가진다. 이를 개선하기 위해 본 논문에서는 SVM의 학습 알고리즘인 SMO의 핵심인 지수함수와 실수 연산기를 VHDL로 설계하고 Mentor의 ModelSim을 이용하여 시뮬레이션하고 Synopsys의 Design Analyzer를 이용하여 합성하였다. 구현된 칩은 시뮬레이션 결과 약 50MHz의 속도로 동작하며, 이는 소프트웨어적으로 구현된 SMO보다 약 10～20배 빠른 성능을 나타내었다.

• Annual Conference of KIPS
• /
• 2007.05a
• /
• pp.1276-1278
• /
• 2007

무선 네트워크 기술의 발전과 이동성 지원에 대한 사용자의 요구가 증대됨에 따라 모바일 IPv6와 이를 확장한 NEMO (NEtwork Mobility) Basic Support 프로토콜이 등장하였다. 이동네트워크들이 중첩되어 구성될 경우 NBS (NEMO Basic Support) 프로토콜을 사용하는 네트워크에서는 패킷이 네트워크를 구성하는 이동라우터(MR, Mobile Router)의 홈에이전트(HA, Home Agent)를 모두 거치면서 중첩 터널링이 수행되는 핀볼라우팅 문제가 발생한다. 본 논문에서는 이러한 문제점을 해결하기 위해 중첩된 이동네트워크에서 새로운 라우팅 헤더를 사용한 경로최적화 기법을 제안한다. 제안하는 기법은 새로운 IPv6 라우팅 헤더 DH (Destination-information Header)를 정의하고 이를 라우팅 헤더 타입 2를 대신하여 사용함으로써 중첩된 이동네트워크에서의 경로최적화를 구현한다. 이 기법은 기존 기법에 비하여 최적화된 경로로 통신하여 최소 32% 뛰어난 성능향상을 확인할 수 있다.

• Journal of Environmental Impact Assessment
• /
• v.26 no.1
• /
• pp.44-56
• /
• 2017

Sustainable development is important because the ultimate objective is efficient development combining the economic, social, and environmental aspects of urban conservation. Despite Korea's rapid urbanization and economic development, the distribution of resources is inefficient, and land-use is not an exception. Land use distribution is difficult, as it requires considering a variety of purposes, whose solutions lie in a multipurpose optimization process. In this study, Yangpyeong-eup, Yangpyeong, Gyeonggi-do, is selected, as the site has ecological balance, is well-preserved, and has the potential to support population increases. Further, we have used the genetic algorithm method, as it helps to evolve solutions for complex spatial problems such as planning and distribution of land use. This study applies change to the way of mutation. With four goals and restrictions of area, spatial objectives, minimizing land use conversion, ecological conservation, maximizing economic profit, restricting area to a specific land use, and setting a fixed area, we developed an optimal planning map. No urban areas at the site needed preservation and the high urban area growth rate coincided with the optimization of purpose and maximization of economic profit. When the minimum point of the fitness score is the convergence point, we found optimization occurred approximately at 1500 generations. The results of this study can support planning at Yangpyeong-eup.ausative relationship between the perception of improving odor regulation and odor acceptance.

• Journal of the Korean Institute of Gas
• /
• v.21 no.2
• /
• pp.32-40
• /
• 2017

Safety Instrumented Systems (SIS) have wide application area. They are of vital importance at process plants to detect the onset of hazardous events, for instance, a release of some hazardous material, and for mitigating their consequences to humans, material assets, and the environment. The integrated safety systems, where electrical, electronic, and/or programmable electronic (E/E/PE) devices interact with mechanical, pneumatic, and hydraulic systems are governed by international safety standards like IEC 61508. IEC 61508 organises its requirements according to a Safety Life Cycle (SLC). Fulfilling these requirements following the SLC can be complex without the aid of SIS supporting tools. This paper presents simple SIS support tool which can greatly help the user to implement the design phase of the safety lifecycle. This tool is modelled in the form of Android application which can be integrated with a Web-based data reading and modifying system. This tool can reduce the computation time spent on the design phase of the SLC and reduce the possible errors which can arise in the process. In addition, this paper presents an optimization approach to SISs based on cost measures. The multi-objective genetic algorithm has been used for the optimization to search for the best combinations of solutions without enumeration of all the solution space.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.11
• /
• pp.1966-1975
• /
• 2008

NEMO Basic Support Protocol standardized in IETF provides the seamless communication environment to all nodes within the mobile network regardless of the network movement while the network is moving. According to the standard, when the mobile network moves outside of its home network the network can make use of the binding update message or dynamic routing protocol in order to register the mobility information into the Home Agent(HA). But because these two methods don't consider the route optimization, all packets destined to Mobile Network Nodes(MNNs) attached into the Mobile Router(MR) have to go through HAs of MRs so that they bring on the transmission delay and the waste of the bandwidth. This situation is to be worse and causes the packet fragmentation problem if MRs within the mobile network are nested. Even though there have been some researches about the route optimization to recover the problems, they have problems in the packet transmission performance side. In this paper, we propose a new scheme to improve the network performance by using a dynamic routing protocol and minimizing the number of HAs on the end-to-end path. Various performance evaluations show that the proposed mechanism gives better performance in view of the packet transmission compared to the existing schemes.