• Journal of Biosystems Engineering
• /
• v.34 no.6
• /
• pp.404-410
• /
• 2009

This study was carried out to develop a self-propelled type explosive subsoiler for improving the root zone soil conditions in orchard and other forest fields. Prototype was designed to be able to inject air and other soil improving material such as lime into soil at the same time, and thus improve the air permeability and drainage of orchard soils to promote the root growth of tree for high quality fruit production. Soil penetration device of explosive subsoiler is composed of air hammer, penetration rob and air injection nozzle. To support the soil penetration device of explosive subsoiler to penetrate vertically, modified Scott-Russel mechanism was used. Timing control device for simultaneous injection of soil improving material with air was attached to the out side wall of air cylinder and as the cylinder move, the soil improving material was injected into soil at the same time. Turning radius of prototype was 2.2-2.3 m with good mobility in sloped land. It took approximately 1 minute for lime injection system to reach the optimum pressure of 9.9 kg/$cm^2$, average 10-20 seconds were required to rupture soil with the depth of 50 cm and 2-3 seconds were required for explosion, so all in all about 1 minute and 20 seconds were required for one cycle of explosion. Maximum soil rupture depth and diameter were 50 cm and 3-4 m respectively depending on the soil type and soil moisture content. For final design of explosive subsoiler inclination angle of lime hopper was increased from 60 degree to 70 degree and the shape of hopper was changed from rectangular cone to circular cone to solve the clogging problem of lime at out let. Agitating system operated by compressed air was attached to the metering device of the prototype, thus more than 90 cc of lime was discharged per cycle from metering device without clogging problems.

• The Bulletin of The Korean Astronomical Society
• /
• v.39 no.2
• /
• pp.98-98
• /
• 2014

Due to the simple vertical structure of magnetic field, pores can be exploited to study the transport of mechanical energy by waves along the magnetic field to the chromosphere and corona. For a better understanding of physics of pores, we have investigated chromospheric traveling features running across two merged pores from their centers at the speed about 55 km s-1, in the active region AR 11828. The pores were observed on 2013 August 24 by using high time, spatial, and spectral resolution data from the Fast Imaging Solar Spectrograph (FISS) of the 1.6 meter New Solar Telescope (NST). We infer a LOS velocity by applying the bisector method to the Ca II $8542{\AA}$ band and $H{\alpha}$ band, and investigate intensity and the line-of-sight velocity changes at different wavelengths and different positions at the pores. We find that they have 3 minutes oscillations, and the intensity oscillation from the line center is preceded by that from the core ($-0.3{\AA}$) of the bands. There is no phase difference between the intensity and the LOS velocity oscillations at a given wavelength. The amplitude of LOS velocity from near the core spectra is greater than that from the far core spectra. These results support the interpretation of the observed wave as a slow magnetoacoustic wave propagating along the magnetic field lines in the pores. The apparent horizontal motion and a sudden decrease of its speed beyond the pores can be explained by the projection effect caused by inclination of the magnetic field with a canopy.

• Aerospace Engineering and Technology
• /
• v.8 no.2
• /
• pp.61-67
• /
• 2009

This paper proposes an on-board orbit data generation algorithm for geostationary satellites. The concept of the proposed algorithm is as follows. From the ground, the position and velocity deviations with respect to the assumed reference orbit are computed for 48 hours of time duration in 30 minutes interval, and the generated data are up-loaded to the satellite to be stored. From the table, three nearest data sets are selected to compute position and velocity deviation for asked epoch time by applying $2^{nd}$ order polynomial interpolation. The computed position and velocity deviation data are added to reference orbit to recover absolute orbit information. Here, the reference orbit is selected to be ideal geostationary orbit with a zero inclination and zero eccentricity. Thanks to very low computational burden, this algorithm allows us to generate orbit data at 1Hz or even higher. In order to support 48 hours autonomy, maximum 3K byte memory is required as orbit data storage. It is estimated that this additional memory requirement is acceptable for geostationary satellite application.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.41 no.3
• /
• pp.108-114
• /
• 2018

One of the most performed action in daily life is standing up from sitting position. As the population of the world is aging at the high rates, people may face problems with reduced muscle strength as well as psychological changes. This can lead elderly people having difficulties with standing up from chair. Now, with the aging trend worldwide, products are being developed that can support the lives of the elderly. This study examines the distribution of hip pressure in relation to the seating positions of the standing assistance seats under development to prevent standing up accidents in older adults. The currently developing standing assistant chair designed to tilt to a maximum angle of 25 degrees. At over $25^{\circ}$, design considers that older people are at risk of thrown back out of that force and that the forces exerted on their arms and legs can be a significant burden to older people. By considering danger of higher than $25^{\circ}$ for older people which is experimented in the basis of static capturing approach in previous papers, it is experimented people with age group of 20~60 on $0^{\circ}$ to $25^{\circ}$ tilting angle on the basis of dynamic capturing method in order to pick convenient angle of inclination. Moreover, tried to find the optimum angle by comparing the hip pressure distribution when seated at the edge of the seat and at the center of the seat with the pressure distribution sensor.

• Journal of the Korean Solar Energy Society
• /
• v.40 no.5
• /
• pp.23-34
• /
• 2020

Concentrator photovoltaic (CPV) system consists of high-quality complex optical elements, mechanical devices, and electronics components and can have the advantages of high integration and high-efficiency energy sources. III-V compound semiconductor cells have proven performance based on high reliability in the aerospace field, but have characteristics that require absolute support of the balance of systems (BOS) such as solar position trackers, receivers with heat sinks, and housing instruments. To determine the optimum parameters of secondary optical elements (SOEs) design for CPV systems, we designed three types of CPV modules, classified as non-SOEs type, reflective mirror type, and CPC lens type. We measured the I-V and P-V characteristics of the prototype CPV modules with the angle of inclination varying from 0° to 12° and with a 500-magnification Fresnel lens. The experimental results assumed misalignment of the solar position tracker or module design of pinpoint accuracy. As a result, at the 0° tilt angle, the CPC lens produced lower power due to the quartz transmittance ratio compared to that by other SOEs. However, for tilt angles greater than 3°, the CPC lens type module achieved high efficiency and stability. This study is expected to help design high-performance CPV systems.

• Journal of Interdisciplinary Genomics
• /
• v.1 no.2
• /
• pp.19-22
• /
• 2019

CATCH 22 syndrome is rare genetic disease that has various manifestations. Cervical vertebral anomaly, such as Klippel-Feil anomaly, is frequently observed in the patients with CATCH22 syndrome. We present the case of an 11-year-old female patient with CATCH22 syndrome and Klippel-Feil anomaly who had been treated torticollis using the customized soft neck collar. During the patient's first visit to our clinic, she presented with low ear set, skull deformity, intellectual disability, and tilting of the head to the left by approximately 25 degrees. Imaging studies revealed multisegmental fusion and C3 hemivertebrae of the cervical spine and left thoracic scoliosis at T4 with 50 degrees of Cobb's angle. We instructed passive stretching and applied the customized soft neck collar we invented. The ipsilateral aspect of the neck collar is designed to provide vertical support between the clavicle and mandibular angle and is adjustable in height. The Velcro was attached to the neck collar at the point of contact with the ipsilesional mandibular angle, which provides negative sensory feedback, inducing her to tilt neck to the contralesional side. We applied the neck collar for 2 hours a day. After 1 year of treatment, her neck inclination angle improved from 25 to 10 degrees. Providing negative sensory feedback using the customized soft neck collar can be one of the treatment options of postural management in patients with torticollis in cases of CATCH 22 syndrome combined with Klippel-Feil anomaly.

• Smart Structures and Systems
• /
• v.23 no.6
• /
• pp.537-551
• /
• 2019

In this paper, a method for analyzing the damping performance of stay cables incorporating magnetorheological (MR) dampers in the passive control mode is developed taking into account the cable sag and inclination, the damper coefficient, stiffness and mass, and the stiffness of damper support. Both numerical and asymptotic solutions are obtained from complex modal analysis. With the asymptotic solution, analytical formulas that evaluate the equivalent damping ratio of the sagged cable-damper system in consideration of all the above parameters are derived. The main thrust of the present study is to develop an general design formula and a universal curve for the optimal design of MR dampers for adjustable passive control of sagged cables. Two sag-affecting coefficients are derived to reflect the effects of cable sag on the maximum attainable damping ratio and the optimal damper coefficient. For the cable configurations commonly used in cable-stayed bridges, the sag-affecting coefficients are directly expressed in terms of the sag-extensibility parameter to facilitate the control design. A case study on adjustable passive vibration control of the longest cable (536 m) on Stonecutters Bridge is carried out to demonstrate the influence of the sag for the damper design, and to figure out the necessity of adjustability of damper coefficients for achieving maximum damping ratio for different vibration modes.

• The Journal of Industrial Distribution & Business
• /
• v.12 no.2
• /
• pp.29-40
• /
• 2021

Purpose: In this study, with the transaction amount of foreign direct Purchase and foreign direct sales increasing, South Korea is in a situation where foreign direct sales are focused on China. We looked at the impact of consumer innovation and site characteristics on repurchase ability among the characteristics of overseas direct purchase consumers as a way to make direct overseas sales to various overseas countries. Research design, data and methodology: Consumer innovativeness consists of four variables: functional, hedonistic, social, and cognitive, and the site characteristics consisted of four variables: product price, product assortment, convenience, and service. The study was conducted on consumers with foreign direct purchase experience, and was finally used in 252 additional analyses. Results: The main findings of this study were first, that the impact on the degree of re-purchase among consumer innovativeness of foreign direct purchase consumers had a significant impact in the order of cognitive innovativeness, hedonistic innovativeness, and functional innovativeness. Social innovativeness did not affect the degree of re-purchase. Second, site characteristics have been found to have a significant impact on the degree of re-purchase in order of product assortment, commodity price, and service. Convenience did not affect the degree of re-purchase. Conclusions Taken together these results can be called the biggest characteristic of the cognitive innovativeness of the consumer's inclination to use the overseas direct purchase, the price or quick response of the goods sold on the site is a factor that affects the re-purchase, above all it is important to have a variety of products. We will present this element as a way to make direct sales abroad to various countries. In addition, foreign direct purchase is a lot of transactions in China, the United States, EU, but the share of China is high in foreign direct sales, and the U.S. and EU have a very low performance, it is important to consider the reasons why they prefer Korean products in China to study the social and cultural characteristics of U.S. and European consumers in the future, and to support and active marketing that companies and sellers can increase sales.

• Journal of Korean Physical Therapy Science
• /
• v.29 no.1
• /
• pp.41-46
• /
• 2022

Background: The purpose of this study was to develop a sit-to-stand transfer assistive device, and to conduct a feasibility test. Design: A technical note. Methods and results: In this study, we developed a sit-to-stand transfer assistive device for the elderly and the disabled who have difficulty standing up independently from sitting positions. The sit-to-stand transfer assistive device allows the user to transfer the weight from a sitting position to a standing position while shifting the weight forward by grabbing and pulling a support stand. Ten healthy adults participated in the feasibility test of the device. Each participant used the developed sit-to-stand transfer assistive device and investigated supplementation through a brief interview. As a result of the feasibility test, the opinion was that the device could assist the sit-to-stand transfer to some extent. There were opinions that it needed a function to adjust the height of the knee protective plate in the sitting position according to the user's physical characteristics. Because of the inconvenience of operating the lock device for fixing the position and adjusting inclination, there was an opinion that the improvement for a locking device is needed. There were opinions that it would be better to reduce the size of the device due to its inconvenience of portability. Conclusion: In this study, we developed the sit-to-stand transfer assistive device for the elderly and the disabled who have difficulty standing up independently from sitting positions. In addition, it is considered that the upgrade of the device is necessary for the future since there are supplementary opinions on some points.

• Journal of Distribution Science
• /
• v.12 no.4
• /
• pp.47-54
• /
• 2014

Purpose - The postponement strategy, which delays the form, place, and production of products as late as possible, has been widely considered as a competitive supply chain management scheme in an era of mass customization and modular manufacturing. An interesting business phenomenon is that not all manufacturing/logistics firms choose the postponement strategy. Given that postponement is a counter-measure to speculation, which has some advantages under certain environments, the current imprudent inclination toward the postponement strategy may cause firms to lose the potential of the speculation strategy, an alternative strategy in supply chain management. Building on the logistics and manufacturing literature, this study examines characteristics of two contrasting strategies, postponement and speculation, and major factors favoring each strategy. Research design, data, and methodology - We apply the profiling approach to two business cases, HP printer and LG mobile phone. The profiling approach is a method of choosing a particular strategy aligned with environmental factors. While various approaches have been used to check the fit between a business strategy and environmental factors, the literature on manufacturing strategy and logistics has commonly adopted the profiling approach. Major factors used in profiling variables are derived from the literature. Two samples, HP printer and LG mobile phone, are selected, because they represent major characteristics appropriate for each strategy. The profiling is based on data from semi-organized interviews with managers. Results - The profiling approach shows that the postponement strategy is a suitable one for HP printers. Most factors, such as product life cycle, large production volume, low-price, product value, and monetary density, support delaying end products until as late as possible. Despite some exceptions, such as delivery time and economy of scale, our analysis states that the overall profile of HP printer is favorable for the postponement strategy. On the other hand, LG mobile phone may adapt the speculation strategy. Although it has large production volume and low delivery frequency, most characteristics support the speculation strategy for this product. An interesting finding is that, despite common perception that advanced technology products such as mobile telephones favor the postponement strategy, profiling proposes the speculation strategy for this product. Conclusions - Our analysis shows that speculation is not the universal option for supply chain management, and that, when choosing a specific strategy, one should consider many factors simultaneously. A major implication of our work is to emphasize the role of environmental factors such as supply chain variables in choosing an inventory strategy, and the importance of fit rather than solely strategic orientation. A theoretical contribution is to demonstrate the benefit of the simultaneous consideration of business variables in choosing specific strategies. For practitioners, our work leads us to consider the existence and the potential of speculation as a counter-measure to postponement. In addition, the comprehensive framework in this research may be instantly used in examining a practical strategy.