• Food Science of Animal Resources
• /
• v.27 no.2
• /
• pp.222-227
• /
• 2007

In order to produce the antibody rich eggs against Salmonella gallinarum(S.G.) causing fowl typhoid, the productions of immunoglobulin in eggs were compared and examined with the feed additives, the variety of adjuvants in vaccines to layers, and the existence of additive antigens other than target microorganism. The examination of the average contents of specific IgY in immunized group by supplying hardwood charcoal showed that the group supplied with 0.5% hardwood charcoal had the highest contents, implying that the supply of hardwood charcoal promoted the production of specific IgY. Adjuvant appeared to have little effect on the average contents of total IgY, but specific IgY contents increased in the immunized group with Freund's adjuvant. Addition of BCG in adjuvant treatment increased specific IgY however, this feature was not seen in aluminum hydroxide treated group. Immunization at 15 week layers resulted in higher laying rate than immunization at 21 week and addition of hardwood charcoal in feed recovered laying rate. It was therefore, concluded that the feed supplement, such as hardwood charcoal followed by a proper immunization program concerning adjuvant, vaccination period and supplementary microorganism hastened the production of IgY.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.35C no.6
• /
• pp.39-47
• /
• 1998

A fourth-order $\Sigma$-$\Delta$ modulator is designed and implemented in 0.6 $\mu\textrm{m}$ CMOS technology. The modulator is verified by introducing nonlinear factors such as DC gain and slew rate in system model that determines the transfer function in S-domain and in time-domain. Dynamic range is more than 110 dB and the peak SM is 102.6 dB at a clock rate of 2.8224 MHz for voiceband signal. The structure of a ∑-$\Delta$ modulator is a modified fourth-order ∑-$\Delta$ modulator using direct feedback loop method, which improves performance and consumes less power. The transmission zero for noise is located in the first-second integrator loop, which reduces entire size of capacitors, reduces the active area of the chip, improves the performance, and reduces power dissipation. The system is stable because the output variation with respect to unit time is small compared with that of the third integrator. It is easy to implement because the size of the capacitor in the first integrator, and the size of the third integrator is small because we use the noise reduction technique. This paper represents a new design method by modeling that conceptually decides transfer function in S-domain and in Z-domain, determines the cutoff frequency of signal, maximizes signal power in each integrator, and decides optimal transmission-zero frequency for noise. The active area of the prototype chip is 5.25$\textrm{mm}^2$, and it dissipates 10 mW of power from a 5V supply.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.45 no.2
• /
• pp.21-27
• /
• 2008

This paper describes a CMOS 16:1 binary-tree multiplexer(MUX) using $0.18-{\mu}m$ technology. To provide immunity for wide frequency range and process-and-temperature variations, the MUX adopts several delay compensation techniques. Simulation results show that the proposed MUX maintains the setup margins and hold margins close to the optimal value, i.e., 0.5UI, in wide frequency-range and in wide process-and-temperature variations, with standard deviation of 0.05UI approximately. These results represent that these proposed delay compensations are effective and the reliability is much improved although CMOS logic circuits are sensitive to those variations. The MUX is fabricated using $0.18-{\mu}m$ CMOS process, and tested with a test board. At power supply voltage of 1.8-V, maximum data-rate and area of the MUX is 1.65-Gb/s and 0.858 $mm^2$, respectively. The MUX dissipates a power of 24.12 mW, and output eye opening is 272.53 mV, 266.55 ps at 1.65-Gb/s operation.

• Journal of Korean Society of Forest Science
• /
• v.101 no.3
• /
• pp.426-433
• /
• 2012

This study was carried out for preliminary feasibility review to consult forest farmer, to make policy and to search improvement for Ligularia fischeri forest farm. The survey for eight Ligularia fischeri forest farmer in Inje-gun was conducted. And the case study was conducted with computing labor input, gross margin, net margin in each planting stages, which is contented each cultivating stage from creating to harvesting. B/C ratio, Net Present Value and Internal Rate of Return were used for profitability analysis. The results applied 3% of discount rate showed IRR 48.6%, B/C ratio 1.5 and NPV 41 million KRW, which means high profitability. Forest farming is early step in Korean forestry so that standard methods of cultivation for that haven't established yet, and differences among farmers in productivity are being. Establishing organized methods of cultivation in each stages and being political supports are essential for income generation to forest households, supply of safe food and rest place for urbanity.

• Asian-Australasian Journal of Animal Sciences
• /
• v.20 no.12
• /
• pp.1909-1916
• /
• 2007

This study compared the growth performance and carcass evaluation of Jeju native cattle (JNC) and its crossbreds (CBK = 25 JNC:50 Charolais:25 Brahman and BCBK = 62.5 JNC:25 Charolais:12.5 Brahman). Eight male calves of each JNC, CBK and BCBK were weaned at 4 month of age and were fed for 24 months of age. All animals grazed a pasture between 5 to 10 months of age then they were fed growing ration at the rate of 1.5% of their BW along with ad libitum supply of Italian ryegrass hay between 11 to 16 months of age and thereafter switched to ad libitum feeding of finishing ration and hay between 17 to 24 months of age. Mean body weight (BW) and BW gain were higher in CBK compared with BCBK and JNC at 4, 10, 16 and 24 months of age. Average daily BW gain during 4 to 10 months of age was the highest for CBK followed by BCBK and JNC. However, daily BW gain was higher in BCBK than in CBK and JNC during 11 and 16 months of age. During fattening period (17 to 24 months) average daily BW gain was higher in JNC than in CBK and BCBK. Slaughter weight, hot and cold carcass weight were higher in CBK compared with JNC and BCBK. Weight of bones, boneless meat, ribs, excluded rib meat, retailed cut meat, tender loin, sir loin, strip loin, sticking, top round, bottom round, fore leg, shank, and thin-flank were higher in CBK than in BCBK and JNC. Fat weight in these carcass cuts and kidney fat was similar in JNC and its crossbreds. Logissimus dorsi and its ratio were higher in CBK compared with BCBK and JNC. Percent moisture, crude protein, and ash contents of beef were similar in JNC and its crossbreds. Percent beef fat was higher in JNC and BCBK than in CBK. Cooking loss and water holding capacity of beef was similar in JNC and its crossbreds. Sheer force was lower in BCBK compared with JNC and CBK. Juiciness, tenderness and flavor of beef were higher in BCBK compared with JNC and CBK. In conclusion, CBK has shown higher growth rate and produced heavier carcasses with good degree of fatness compared with JNC and BCBK. However, fattening for longer period could increase the maintenance cost in CBK and BCBK because of their higher BW which they attained during growing period.

• Journal of Bio-Environment Control
• /
• v.22 no.2
• /
• pp.123-130
• /
• 2013

$CO_2$ enrichment systems have been recently used to shorten the growth period of plants and the improvement of harvest and its quality. To accomplish these goals, manifold should be designed to supply the same amount of $CO_2$. In this study, CFD approach has been used to understand the effects of geometric parameters, such as tube and hole diameters. An optimized geometry has been derived through pipe and tube part, respectively. As a result, the deviation of flow rate less than 0.1 g/s was expected at all holes of the $CO_2$ enrichment system.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.5D
• /
• pp.633-639
• /
• 2011

To estimate a proper fleet size of taxi, a daily archived tachograph was analyzed for both corporate taxi and owner-driver taxi. Mathematical model to estimate a desirable number of taxi was developed using city's characteristics of Pyeong-taek city case. This model could be used as coefficient of determination of city's characteristics model(revised R square) was 0.970. a total amount of taxi number in the future for the city of Pyeong-taek. As a result, the model produced a proper fleet size of Pyeong-taek city in the future as 1,794 taxis by 2014, which was higher in number by 214 taxis, compared to 2009. Also, the model of the service rate, considering operation condition, was used to analyze a total number of taxies. As a result, the model showed a total number of taxis as 1,224 taxis by 2014, which is lower in number by 356 taxies, compared to 2009. It is desirable to use both city's characteristics model and the service rate model to estimate a total number of taxis in conclusion. As a result of adopting average value from two model, the model produced a total supply plan of Pyeong-taek city as 1,509 taxis by 2014, which is smaller than in number by 71 taxis, compared to 2009.

• Journal of Bio-Environment Control
• /
• v.10 no.4
• /
• pp.232-236
• /
• 2001

Four air temperature levels of 23, 25, 27 and 29$^{\circ}C$, three humidity levels of 85, 90 and 95% R.H. at photosynthetic photon flux (PPF) of 50 $\mu$mol.m$^{-2}$ .s$^{-1}$ were provided to investigate the effect of vapor pressure deficit on the evapotranspiration rate (EVTR) and graft-taking of watermelon grafted seed-increase. Thus EVTR of grafted seedlings increased with increasing air temperature at high humidity of 95%R.H. At relatively low humidity of 85% R.H., grafted seedlings showed a high EVTR and some wilting of scions was observed at this condition. This result would be ascribed to the low supply of water to vascular bundles according to the insufficient joining of scions and rootstocks. Differences in EVTR between 90% R.H. and 95% R.H. were not observed. Grafted seedlings showed high graft-taking at high relative humidity. Relative humidity had highly influenced to the graft-taking as compared to the air temperature. Graft-taking increased with decreasing vapor pressure deficit. Graft-taking greater than 90% was found at vapor pressure deficit less than 0.4kPa which could be obtained at humidity higher than 90% R.H. Therefore it is required to control the humidity higher than 90% R.H. for suppressing EVTR of grafted seedlings and preventing some wilting of scoins and thus enhancing the graft-taking of grafted seedlings.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.34 no.8
• /
• pp.767-774
• /
• 2010

In a passive-type PEMFC stack, axial fans operate to supply both oxidant and coolant to cathode side of the stack. It is possible to make a simple system because the passive-type PEMFC stack does not require additional cooling equipment. However, the performance of a cooling system in which water is used as a coolant is better than that of the air-cooling system. To ensure system reliability, it is essential to make cooling system effective by adopting an optimal stack design. In this study, a numerical investigation has been carried out to identify an optimum cooling strategy. Various channel configurations were applied to the test section. The passive-type PEMFC was tested by varying airflow rate distribution at the cathode side and external heat transfer coefficient of the stack. The best cooling performance was achieved when a channel with thick ribs was used, and the overheating at the center of the stack was reduced when a case in which airflow was concentrated at the middle of the stack was used.

• Korean Chemical Engineering Research
• /
• v.44 no.1
• /
• pp.46-51
• /
• 2006

As one of the $CO_2$ reduction strategies, a biological method was proposed to convert $CO_2$ to useful biomass with antioxidant carotenoids by photosynthetic microorganisms. One of the photoautotrophs, Haematococcus pluvialis is a freshwater green microalga and accumulates the secondary carotenoid astaxanthin during induction of green vegetative cells to red cyst cells. In this study, $CO_2$ fixation and astaxanthin production using H. pluvialis was conducted by photoautotrophic culture in the $CO_2$ supplemented photo-incubator. Maximum growth rate of H. pluvialis was obtained at a 5％ $CO_2$ environment on basic N and P conditions of NIES-C medium. The photoautotrophic induction consisted of 5％ $CO_2$ supply and high light illumination promoted astaxanthin synthesis in H. pluvialis, yielding an astaxanthin productivity of $9.6mg/L{\cdot}day$ and a $CO_2$ conversion rate of $27.8mg/L{\cdot}day$ to astaxanthin. From the results the sequential photoautotrophic culture and induction process using H. pluvialis is expecting an alternative $CO_2$ reduction technology with a function of valuable biosubstance production.