• Title/Summary/Keyword: supply rate

Search Result 2,645, Processing Time 0.039 seconds

Growth and Survival of the Hard Clam, Meretrix petechialis (Lamarck) Larvae to Food Organisms (먹이생물에 따른 말백합, Meretrix petechialis (Lamarck) 유생의 성장 및 생존)

  • Kim, Tae-Ik;Ko, Chang-Sun;Hur, Young-Baek;Yang, Mun-Ho;Chang, Young-Jin
    • The Korean Journal of Malacology
    • /
    • v.27 no.3
    • /
    • pp.175-180
    • /
    • 2011
  • The investigated amounts according to microalgae for stable supply of artificial seed of the hard clam, Meretrix petechialis and also observed the effect according to the repower of the microalgae after the specified period starvation. The stage of specimen used in the test was the D-shaped larva. The microalgae was Chaetoceros calcitrans, Isochrysis galbana and Nannochloris oculata. When the mixture of Chaetoceros calcitrans, Isochrysis galbana and Nannochloris oculata or alone C. calcitrans as food was supplied with 3,000-5,000 cells/ind., it turned to be the most effective. When the food was provided after starvation for some period, the shell length of D-shaped larva was grown to over $192.5{\mu}m$ at fourth day from the initial feeding. The survival rate tended to be lower, the longer the starvation period.

Design of high slew-rate OTA for DC-DC converters (DC-DC 컨버터용 높은 슬류율의 OTA 설계)

  • Kim, In-Suk;Ryu, Seong-Young;Roh, Jeong-Jin
    • Journal of the Institute of Electronics Engineers of Korea SD
    • /
    • v.43 no.10 s.352
    • /
    • pp.118-125
    • /
    • 2006
  • A new error amplifier is presented for fast transient response of DC-DC converters. The amplifier has low quiescent current to achieve high power conversion efficiency, but it can supply sufficient current during large signal operation. Two comparators detect large-signal variations, and turn on extra current supplier if necessary. The amount of extra current is well controlled, so that the system stability can be guaranteed in various operating conditions. The simulation results show that the new error amplifier achieves significant improvement in transient response than the conventional one.

A Novel Method for Time-Interleaved Subranging ADC 8bit 80MS/s in 0.18um CMOS (새로운 방법의 채널 시간 공유 Subraning ADC 8bit 80MS/s 0.18um CMOS)

  • Park, Ki-Chul;Kim, Kang-Jik;Cho, Seong-Ik
    • Journal of the Institute of Electronics Engineers of Korea SC
    • /
    • v.46 no.1
    • /
    • pp.76-81
    • /
    • 2009
  • A novel design method of time-interleaved subranging ADC is presented. We use the bisection method to let only half of comparators in typical subranging ADC working in every clock cycle. Thus, we are able to reduce the number of comparators by half. It is possible to reduce the die size. An example of 8-bit time-interleaved subranging ADC operates at 40MHz sampling rate and 1.8V supply voltage is demonstrated. The power consumption of the proposed circuit is only 10mV with SPECTRE simulation. Compared with the typical subranging ADC, our bisection method is able to reduce up to 40% in die size.

Design of single-chip NFC transceiver (단일 칩 NFC 트랜시버의 설계)

  • Cho, Jung-Hyun;Kim, Shi-Ho
    • Journal of the Institute of Electronics Engineers of Korea SD
    • /
    • v.44 no.1
    • /
    • pp.68-75
    • /
    • 2007
  • A single chip NFC transceiver supporting not only NFC active and passive mode but also 13.56MHz RFID reader and tag mode was designed and fabricated. The proposed NFC transceiver can operate as a RFID tag even without external power supply which has dual antenna structure for initiator and target. The area increment due to additional target antenna is negligible because the target antenna is constructed by using a shielding layer of initiator antenna. The analog front end circuit of the proposed NFC transceiver consists of a transmitter and receiver of reader/writer block supporting NFC initiator or RFID reader mode, and a tag circuit for target of passive NFC mode or RFID tag mode. The maximum baud rate of the proposed NFC device is 212kbps by using UART serial interface. The chip has been designed and fabricated using a Magnachip's $0.35{\mu}m$ double poly 4-metal CMOS process, and the effective area of the chip is 2200um by 3600um.

Low Power Dual-Level LVDS Technique using Current Source Switching (전류원 스위칭에 의한 저전력 듀얼레벨 차동신호 전송(DLVDS) 기법)

  • Kim, Ki-Sun;Kim, Doo-Hwan;Cho, Kyoung-Rok
    • Journal of the Institute of Electronics Engineers of Korea SD
    • /
    • v.44 no.1
    • /
    • pp.59-67
    • /
    • 2007
  • This paper presents a low power dual-level low voltage differential signaling (DLVDS) technique using current source switching for LCD driver ICs in portable products. The transmitter makes dual level signal that has two different level signal 400mVpp and 250mVpp while keeping the advantages of LVDS. The decoding circuit recovers the primary signal from DLVDS. The low power DLVDS is implemented using a $0.25{\mu}m$ CMOS process under 2.5V supply. The proposed circuit shows 800Mbps/2-line data rate and 9mW, 11.5mW power consumptions in transmitter and receiver, respectively. The proposed DLVDS scheme reduce power consumption dramatically compare with conventional one.

A 1.248 Gb/s - 2.918 Gb/s Low-Power Receiver for MIPI-DigRF M-PHY with a Fast Settling Fully Digital Frequency Detection Loop in 0.11 ㎛ CMOS

  • Kim, Sang-Yun;Lee, Juri;Park, Hyung-Gu;Pu, Young Gun;Lee, Jae Yong;Lee, Kang-Yoon
    • JSTS:Journal of Semiconductor Technology and Science
    • /
    • v.15 no.4
    • /
    • pp.506-517
    • /
    • 2015
  • This paper presents a 1.248 Gb/s - 2.918 Gb/s low-power receiver MIPI-DigRF M-PHY with a fully digital frequency detection loop. MIPI-DigRF M-PHY should be operated in a very short training time which is $0.01{\mu}s$ the for HS-G2B mode. Because of this short SYNC pattern, clock and data recovery (CDR) should have extremely fast locking time. Thus, the quarter rate CDR with a fully digital frequency detection loop is proposed to implement a fast phase tracking loop. Also, a low power CDR architecture, deserializer and voltage controlled oscillator (VCO) are proposed to meet the low power requirement of MIPI-DigRF M-PHY. This chip is fabricated using a $0.11{\mu}m$ CMOS process, and the die area is $600{\mu}m{\times}250{\mu}m$. The power consumption of the receiver is 16 mW from the supply voltage of 1.1 V. The measured lock time of the CDR is less than 20 ns. The measured rms and peak jitter are $35.24ps_{p-p}$ and $4.25ps_{rms}$ respectively for HS-G2 mode.

1999 Seasonal Nutrition Survey ( II ) - Nutrient intake status - (1999 년도 계절별 영양조사 ( II ) - 영양소섭취실태 -)

  • Kim, Bok-Hui;Gye, Seung-Hui;Lee, Haeng-Sin;Jang, Yeong-Ae;Sin, Ae-Ja
    • Journal of the Korean Dietetic Association
    • /
    • v.7 no.4
    • /
    • pp.426-438
    • /
    • 2001
  • Nutrient intake of Koreans from the 1999 Seasonal Nutrition Survey was somewhat lower than those of 1995 National Nutrition Survey or 1998 National Health and Nutrition Survey owing to the seasonal variation in amount and kind of foods eaten. In addition to the seasonal variation, low response rate of households which were surveyed twice was another reason for lower intake. Analysis of the major source of nutrients showed that intake of energy, carbohydrate, vitamin A and vitamin C was influenced by seasonal food supply pattern. And especially, vitamin A and vitamin C intake was more influenced by consumption of fruits and vegetables than other food groups. Main sources of these two nutrients were spinach and strawberry in spring, watermelon, tomato, melon and potato in summer, and grapes and pumpkin in autumn. As shown before in the report on food consumption, intake of beverages, drinks, fruits and vegetables was more influenced by season than others and these food groups affected the nutrient intake most. With the results of the 1998 National Health and Nutrition Survey, this study made it possible to estimate the average nutrient intake of the Korean population through out a year.

  • PDF

Preparation of Calcium Peroxide Originated from Oyster Shell Powder and Oxygen Releasing Ability (패각 분말기반 과산화칼슘 제조와 산소 유리 특성)

  • Yoo, Gilsun;An, Jieun;Cho, Daechul;Kwon, Sung Hyun
    • Journal of Environmental Science International
    • /
    • v.27 no.9
    • /
    • pp.763-770
    • /
    • 2018
  • Bioremediation in situ is heavily dependent on the oxygenic environment which would privide the dwelling microorganism with sufficient oxygen. The situation could be easily resolved with supply of an Oxygen Releasing Compound (ORC). In this paper we prepared that sort of material out of oyster shell powder (mostly calcium carbonate) that prevails every shore areas of the country. We used two different oxidizing methods in the first step of the whole manufacturing process-conventional heating in a furnace and an ultrasound generator to obtain calcium oxide. Then that calcium oxide was further oxidized into calcium peroxide which may release oxygen under a moisturized condition. The oxygen releasing experiments were run to test the performance of our products, and to determine the gas kinetics during the experiments. Interestingly, calcium peroxide derived from ultrasound treatment was much more energy-effective as ORC than that from furnace heating although the heat derived process was better than that of ultrasound in terms of oxygen content and its releasing rate. We also found that most of the data collected from the gas releasing experiments fairly supported an ordinary $1^{st}$ order kinetics to oxygen concentration, which shaped a sharp discharge of oxygen at the very early moment of each test.

A SURVEY OF GUARDIANS' COGNITION LEVEL AND SATISFACTION RATE ABOUT CONSCIOUS SEDATION (의식하 진정법에 관한 보호자의 인식도 및 만족도 조사)

  • Choi, Han-Ju;Park, Jae-Hong;Kim, Gwang-Chul;Choi, Sung-Chul
    • Journal of the korean academy of Pediatric Dentistry
    • /
    • v.35 no.4
    • /
    • pp.700-708
    • /
    • 2008
  • The aim of this study was to recognize guardians' desire and awareness on sedation, and to guide guardians' satisfaction and cooperation. Followings are the conclusion : 1. Information supply about conscious sedation were restrictive and insufficient. 2. Both first-visit guardians and guardians of sedated patients were interested in decrease of dental fear. 3. Both first-visit guardians and guardians of sedated patients were satisfied with psychological improvement better than behavior improvement. Therefore, decrease of patients'ear and anxiety was essential. 4. Both first-visit guardians and guardians of sedated patients didn't recognize accurate safety of conscious sedation.

  • PDF

Pilot Scale Production of Poly (3-Hydroxybutyrate-co-3-hydroxy-valerate) by Fed-batch Culture of Recombinant Escherichia coli

  • Park, Jong-il;Lee, Sang-Yup;Kyungsup Shin;Lee, Woo-Gi;Park, Si-Jae;Chang, Ho-Nam;Chang, Yong-Keun
    • Biotechnology and Bioprocess Engineering:BBE
    • /
    • v.7 no.6
    • /
    • pp.371-374
    • /
    • 2002
  • Production of poly(3-hydroxybutyrate-co-3-hydroxyvalerate)[P(3HB/V)], by fed-batch culture of recombinant Escherichia coli harboring a plasmid containing the Alcaligenes latus polyhy-droxyalkanoate (PHA) biosynthesis genes, was examined in two pilot-scale fermentors with air supply only, In a 30 L fermentor having a XLa value of 0.11 S­$^1$, the final P(3HB/V) concentration and the P(3HB/V) content obtained were 29.6 g/L and 70.1 wt%, respectively giving a productivity of 1.37 g P(3HB/V)/L-h. In a 300 L fermentor having a XLa of 0.03 S­$^1$, the P(3HB/V) concentration and the P(3HB/V) content were 20.4 g/L and 69 wt%, respectively giving a productivity of 1.06g P(3HB/V)/L-h. These results suggest that economical production of P(3HB/V) is possible by fed-batch culture of recombinant E. coli in a large-scale fermentor having low KLa value.