• Journal of Korean Society of Disaster and Security
• /
• v.16 no.2
• /
• pp.85-98
• /
• 2023

Flood is one of the most frequent natural disasters worldwide. In Korea, the probability of urban flooding is greatly increasing due to complex factors such as global warming, an increase in impervious areas, and limitations in expanding water supply facilities in existing urban areas. However, large-scale civil engineering works to prevent urban inundation are socially and economically difficult to obtain national consent. Recently the importance of resilience, which is the ability to return to the original state after a disaster through rapid recovery while preparing for natural disasters to a level that the local community can afford socially and economically, is increasing. Accordingly, various studies on urban resilience have been conducted, but the resilience measurement method related to the lifeline that provides essential services of the city is insufficient. However, among lifelines, road networks are important facilities for the transportation of recovery resources and rapid recovery in the event of a natural disaster, so road networks are a major factor that must be considered when measuring the degree of recovery of a city in the field of natural disasters. Therefore, this study proposes a recovery evaluation method considering the characteristics of resilience and road networks in the urban flooding field and analyzes the effect of road networks on urban resilience.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.11
• /
• pp.2305-2315
• /
• 2015

Frequency resource value is growing more and more with the development of the wireless communication. With the advent of the current information society comes a serious shortage of frequency resource, as the amount of supply is far from meeting its demands. Thus, cognitive radio (CR) technique is receiving more attention as a way to make use of the temporarily unoccupied frequency resource. In this paper we propose a novel out-of-band spectrum sensing and dynamic channel access scheme for frequency hopping-based cognitive radio ad-hoc networks. At the beginning of each current channel hopping time, member nodes perform spectrum sensing for the next hopping channel. Based on the proposed collision free primary detection notification, member nodes can determine whether they should execute a hopping time extension procedure of the current channel or not. When the primary detected hopping channel is re-idled, the hopping pattern recovery procedure is performed. In this paper we evaluated the performance of the proposed dynamic sensing and hopping channel extension mechanism for the various wireless network conditions. As a result, we show that the proposed method can increase channel utilization and provide reliable channel management operation.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.34 no.3
• /
• pp.263-271
• /
• 2016

On account of population aging and increasing cardiovascular disorders, acute cardiac arrest cases are escalating each year. In order to increase the survival rate of the patients, rapid cardiopulmonary resuscitation is necessary. For this reason, the government is expanding the supply of Automated External Defibrillators(AED). However, the AEDs cannot be effectively deployed to the incident cases that occur outdoors, for the installed AEDs are mostly located indoors. After analyzing the distribution of incident cases within the study area, about 11% of cardiac arrest incidents occurred in open spaces including sidewalks and residential areas. This study was conducted to increase the survival rate of the patients by allocating 41 additional AEDs in the study area using a GIS based location-allocation method. To conduct a feasibility study, the density of a senior floating population covered by the same number of AEDs placed at random and the density covered by the experiment were compared. In conclusion, having excluded outliers caused by geological and social factors, results showed that AEDs placed through GIS based location-allocation covered 5% more of the senior floating population density.

• Journal of the Korea Society of Computer and Information
• /
• v.3 no.3
• /
• pp.139-150
• /
• 1998

Due to development of science and telecommunication with wide-spread computer supply, it could be done through computer automatically instead of manpower-work for paper transportation & paper approval. It is developed to so-called Factory Automation. Further, it is developed to Office Automation. Trading companies & concerned trade authorities are interested in Trade Automation that such technique is applied to trade work. Generally, Trade Automation means to realize paperless trade by exchanging electronic papers through inter-computers after concerned trade operators transformed various papers to electronic papers that computer could read. In case Trade Automation fix in the trade business, it is expected one of innovations among traditional paper work of trade business, namely without going import-export authorities, Customs office, Banks. Shipping companies, Marine insurance companies on hand-carrying papers, it could be fast, simple, correct to finish every trade procedures such as commercial business, foreign currency, customs clearance, transportations, insurance. terms of payment, etc., with Electronic Data Interchange through computer facilities. Especially, telecommunication for trade form could be helpful to proceed trade paper with one-run-method Further we can anticipate 6 effects for Trade Automation as belows : First, as explained just above articles, with completion for Trade Automation, every trade procedures can be done by computer. so, time to work can be diminished. namely. logistics cost including accessory costs for trade procedures can be saved much. Second, viewing to private enterprise, effect of Office Automation can be maximized and rapid, correct exchange for various trade informations could raise efficiency of enterprise management establishing rational production, storage, transportation and could raise competition improving standard for consumers's service. Third, establishing Trade Automation systems makes it easier piling-up of harbor cargo by pre-transmission of electronic paper & trade informations make it possible to finish customs clearance in advance and can be dispatched upon cargo arrival. Fourth, most of concerned trade authorities such as import-export approval office. financial authorities, transport & insurance companies concentrated in Metropolitan area(Seoul, In -Cheon, Kyung-Ki). Therefore, in case Trade Automation could be realized. it is possible to proceed trade business instantly in every country area by computer facilities. Also. it contribute well-balanced development for suburb. region area by suburb dispersion of trading companies. Fifth, on the way to Trade Automation establishment & its enlargement process. producing enormous demand for over-all telecommunication such as hardware. software. network makes opportunity to progress telecommunication industry & concerned industries. Finally. Trade Automation accelerate change of employment structure leading unnecessary labors on the industries of office & logistics to manufacturing area.

• Journal of Navigation and Port Research
• /
• v.28 no.3
• /
• pp.213-219
• /
• 2004

In this paper, a LNA(Low Noise Amplifier) has been developed, which is operating at L-band i.e., 1452∼1492 MHz for satellite DAB(Digital Audio Brcadcasting) receiver. The LNA is designed to improve input and output reflection coefficient and VSWR(Voltage Standing Wave Ratio) by balanced amplifier. The LNA consists of low noise amplification stage and gain amplification stage, which make a using of GaAs FET ATF-10136 and VNA-25 respectively, and is fabricated by hybrid method. To supply most suitable voltage and current, active bias circuit is designed Active biasing offers the advantage that variations in $V_P$ and $I_{DSS}$ will not necessitate a change in either the source or drain resistor value for a given bias condition. The active bias network automatically sets $V_{gs}$ for the desired drain voltage and drain current. The LNA is fabricated on FR-4 substrate with RF circuit and bias circuit, and integrated in aluminum housing. As a reults, the characteristics of the LNA implemented more than 32 dB in gain. 0.2 dB in gain flatness. lower than 0.95 dB in noise figure, 1.28 and 1.43 each input and output VSWR, and -13 dBm in $P_{1dB}$.

• Journal of Korea Water Resources Association
• /
• v.50 no.10
• /
• pp.673-679
• /
• 2017

In this paper a method for estimating the 'service life' and 'residual life' of a water pipe based on the Water Pipe Network Performance Evaluation(WPNPE) results of Water Supply Technical Diagnosis was developed for efficient maintenance of water pipes. The residual life of a pipe was defined as the difference between the service life and elapsed time since installation. The service life was defined as the time when a pipe reaches the reference score for determining deteriorated pipes that was used in the WPNPE. The pipe evaluation criteria and deterioration scores used in the WPNPE for the case study area were considered as independent variables in the multiple regression model for estimating the service life and residual life of the pipes in the area. To estimate the service life for the pipes the reference scores for determining deteriorated pipes were used as the values of the variables that represent the deterioration scores in the constructed regression models. Subsequently, the statistics of the service life and residual life of the pipes in the case study area were presented and analyzed in comparison with the service life defined by the Local Public Enterprizes Act.

• Journal of Korea Water Resources Association
• /
• v.37 no.1
• /
• pp.21-29
• /
• 2004

The growth of water resources engineering associated with stable supply, management, development is essential to overcome the coming water deficit of our country. Large scale remote sensing and the analysis of sub-pixel variability of soil moisture fields are necessary in order to understand water cycle and to develop appropriate hydrologic model. The target resolution of coming Global monitoring of soil moisture field is about 10km which is not appropriate for the regional scale hydrologic model. Therefore, we need a downscaling scheme to generate hydrologic variables which are suitable for the regional hydrologic model. The results of the analysis of sub-pixel soil moisture variability show that the relationship between ancillary data and soil moisture fields shows there is very weak linear relationship. A downscaling scheme was developed using physically-based classification scheme and Neural Networks which are able to link the nonlinear relationship between ancillary data and soil moisture fields. The model is demonstrated by downscaling soil moisture fields from 4km to 0.2km resolution using remotely-sensed data from the Washita'92 experiment.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.11
• /
• pp.5879-5884
• /
• 2013

With the rapid industrialization and economical development, the electricity demands of the industrial facilities and densely populated large cities are continuing to increase in Korea. The increase in the power consumption requires the extension of power facilities, but it is difficult to secure spaces for equipment installation in the limited space of urban areas. In addition, the 154 kV or 345 kV transmission systems in Korea has a short transmission distance, and are connected to one another in network structures that ensure the high reliability and stability of power supply. This structure reduces the impedance during the fault in power system, and increases the magnitude of in the short circuit fault current. The superconducting fault current limiter (SFCL) was devised to effectively address these existing problems. The SFCL is a new-concept eco-friendly protective device that ensures fast operation and recovery time for the fault current and does not need additional fault detection devices. Therefore, many studies are being conducted around the world. In this paper, based on the wiring method the initial fault current characteristics, current limiting characteristics, according to the incident angle and the change in inductance current limiting characteristics were analyzed in a multifaceted methods.

• The Korean Journal of Applied Statistics
• /
• v.32 no.1
• /
• pp.161-171
• /
• 2019

Varied methods have been researched continuously because the past as the daily maximum electricity demand expectation has been a crucial task in the nation's electrical supply and demand. Forecasting the daily peak electricity demand accurately can prepare the daily operating program about the generating unit, and contribute the reduction of the consumption of the unnecessary energy source through efficient operating facilities. This method also has the advantage that can prepare anticipatively in the reserve margin reduced problem due to the power consumption superabundant by heating and air conditioning that can estimate the daily peak load. This paper researched a model that can forecast the next day's daily peak load when considering the influence of temperature and weekday, weekend, and holidays in the Seasonal ARIMA, TBATS, Seasonal Reg-ARIMA, and NNETAR model. The results of the forecasting performance test on the model of this paper for a Seasonal Reg-ARIMA model and NNETAR model that can consider the day of the week, and temperature showed better forecasting performance than a model that cannot consider these factors. The forecasting performance of the NNETAR model that utilized the artificial neural network was most outstanding.

• Journal of Technology Innovation
• /
• v.29 no.1
• /
• pp.1-38
• /
• 2021

In this paper, an exploratory analysis study was conducted on establishing a strategy to utilize living labs to enhance the innovation of the energy sector. Through the previous research literature, it was possible to confirm the concept, essential components, innovation characteristics of living labs, and types of innovation issues in the energy sector as the theoretical background. Based on this, the case studies of energy living lab (8 overseas, 1 domestic) were analyzed focusing on the possibility of utilizing living lab as an approach to innovation issues in the energy sector, establishing a customized strategy for essential components of living lab and enhancing innovation. It was confirmed that the establishment of a customized strategy for the essential components of the living lab could be a driving force in enhancing innovation, and the Living Lab is effectively used as an approach method for innovation issues(demand management, supply technology, enhance R&D acceptance and promote commercialization, technology policies) in the energy sector. As a result of the case studies, the driving force of each living lab was derived from the viewpoint of contributing to innovation, and strategies for using the living labs for each energy innovation problem were established. This study is an exploratory and descriptive analytical study of the utilization strategy and value of the living lab model as an approach to innovation issues in the energy field, which can provide a living lab strategy framework that has not been tried in the past and enables living lab activation and network formation. It can also be considered to have academic, practical, and policy implications in that it can also contribute.