• Nuclear Engineering and Technology
• /
• 제52권8호
• /
• pp.1862-1870
• /
• 2020

The purpose of this study is to investigate the effect of welding residual stress on operating stress in designing a nuclear turbine welded rotor. A two-dimensional axisymmetric finite element model is employed to calculate the residual stress before and after post weld heat treatment (PWHT), and then the superposition of residual stress after PWHT and operating stress at normal speed and overspeed were discussed. The investigated results show that operating stress can be affected significantly by welding residual stress, and the distribution trend of superposition stress at the weld area is mainly determined by welding residual stress. The superposition of residual stress and operating stress is linear superposition, and the hoop stress distribution of superposition stress is similar with the distribution of residual stress. With the increasing overspeed, the distribution pattern of the hoop superimposed stress remains almost unchanged, while the stress level increases.

• 대한기계학회논문집A
• /
• 제30권8호
• /
• pp.976-984
• /
• 2006

Time-temperature superposition has been studied to determine the long-term fatigue life over millions of cycles for glassy polymers. π le superposition is supposed to make an accelerated lifetime testing (ALT) technique possible. Dog-bone shaped specimens made of carbon filled Polycarbonate (PC) were tested under fatigue, based on the stress-lifetime approach (S-N curve). Fatigue-induced localized yield-like deformation is considered as the defect leading to fatigue and its evolution behavior is characterized by a modified energy activation model in which temperature is considered as fatigue acceleration factor. This model allows the reduced time concept to account for effects of different temperature in short-term fatigue data to determine long-term fatigue life through the use of time-temperature superposition that is applicable under a low frequency and isothermal conditions. The experimental results validated that the proposed technique could be a possible method for accelerated lifetime testing (ALT) of time-dependent polymeric materials.

• 한국지진공학회논문집
• /
• 제7권3호
• /
• pp.39-45
• /
• 2003

본 논문에서는 구조물의 효율적인 동적해석을 위한 수정된 Lanczos 벡터중첩법을 제안하였다. 제안방법은 강성행렬에 직교하는 Lanczos 벡터를 생성하는 수정된 Lanczos 알고리즘에 기초하고 있다. 단일입력하중을 받는 구조물의 해석에 있어서 제안한 Lanczos 벡터중첩법은 기존의 Lanczos 벡터중첩법과 동일한 정확도와 효율성을 갖는 반면 다중입력하중을 받는 구조물의 경우 제안방법이 기존의 방법보다 더욱 효율적이다. 수치예제를 통해 제안방법의 효율성을 검증하였다.

• 한국해양공학회지
• /
• 제20권1호
• /
• pp.43-47
• /
• 2006

Superposition of three wave trains on finite depth is investigated. This paper is focused on how to improve the linear superposition of three waves. This was realized by introducing the scheme. The idea of the scheme is based on a fixed point approach. Application of the scheme to the superposition makes it possible to obtain a wave profile of wave-wave interaction. With the help of FFT, it was possible to analyze high-order nonlinear frequencies for three interacting Stokes' waves on finite depth.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2011년도 제42회 하계학술대회
• /
• pp.1608-1609
• /
• 2011

In this study, in order to develop the evaluation method for XLPE materials for HVDC cables, DC/Impulse superposition testing system was builded up. Throughout the P-spice simulation, optimal values of the protection resistor for the DC generation system and the blocking capacitor for the Impulse generator were calculated. DC/Impulse superposition system showed good result maintaining their proper wave shapes and amplitudes. This system would be planned to apply to the evaluation of XLPE materials for HVDC cables.

• 전기전자학회논문지
• /
• 제24권1호
• /
• pp.360-363
• /
• 2020

We present the power of the correlated superposition coding (SC) in non-orthogonal multiple access (NOMA). This paper derives closed-form expressions for the total allocated power with the constant total transmitted power. It is shown that the total allocated power is the function of a correlation coefficient. In result, the correlated SC NOMA should be designed with consideration of the correlation coefficient.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2000년도 춘계학술발표대회 논문집
• /
• pp.89-92
• /
• 2000

In this paper, an effective procedure is presented for the local recovery of displacements and stresses in multilayered composite panels, which incorporate the local refinement using mesh superposition. The mesh superposition method is used to refine the global coarse mesh by superimposing refined mesh to the localized zone of interest without transition zones. The finite element model used is a solid element based on the Hellinger-Reissner variational principle. The a posteriori computation of the through-the-thickness distributions of displacements and stresses is achieved using a predictor-corrector procedure. The procedure utilizes the superconvergent stresses and nodal displacements of the finite element patch. The element patch is generated by locally superimposing a refined local mesh to the coarse global mesh.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2003년도 봄 학술발표회 논문집
• /
• pp.11-18
• /
• 2003

This paper proposes modified Lanczos vector superposition method for efficient dynamic analysis of structures. Proposed method is based on the modified Lanczos algorithm that generates stiffness-orthonormal Lanczos vectors. Proposed method has better computing efficiency than the conventional Lanczos vector superposition method in the analysis of multi-input-loaded structures. The efficiency of proposed method is verified through numerical examples. Comparison with other vector superposition methods is also presented through numerical examples.

• 한국통신학회논문지
• /
• 제40권10호
• /
• pp.1934-1936
• /
• 2015

본 논문은 협력 통신에서 중첩변조를 활용한 최적의 중계단 선정 및 적응적 전송률 향상 기법을 제안한다. 중첩변조를 활용한 중계단 선정 신호를 활용해 최적의 중계단을 선정함과 동시에 채널 상태를 추정하여 중첩되는 신호의 수를 결정하여 채널 상태에 따라 적응적으로 전송률을 향상시키는 기법을 제안한다.

• Steel and Composite Structures
• /
• 제20권2호
• /
• pp.295-316
• /
• 2016

This paper presents the results of experimental investigation, numerical calculation and theoretical analysis on axial compression ratio limit values for steel reinforced concrete (SRC) special shaped columns. 17 specimens were firstly intensively carried out to investigate the hysteretic behavior of SRC special shaped columns subjected to a constant axial load and cyclic reversed loads. Two theories were used to calculate the limits of axial compression ratio for all the specimens, including the balanced failure theory and superposition theory. It was found that the results of balanced failure theory by numerical integration method cannot conform the reality of test results, while the calculation results by employing the superposition theory can agree well with the test results. On the basis of superposition theory, the design limit values of axial compression ratio under different seismic grades were proposed for SRC special shaped columns.