• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.40 no.2
• /
• pp.171-178
• /
• 2014

The purpose of this study was to analyse the volatile components of Thymus magnus Nakai extracted by different extraction methods and reproduce scent close to original plant based on the results. For this purpose, the essential oil of T. magnus was extracted by supercritical fluid extraction (SFE), water and steam distillation (WSD) and simultaneous steam distillation and extraction (SDE) methods. The compositions of the essential oil were analyzed by gas chromatography-mass spectrometry (GC-MS). Consequently, linalool (0.1%) and trans-sabinene hydrate (0.9%) contents in the essential oil extracted by SFE method of $40^{\circ}C$ - 400 bar condition were relatively higher than compositions of the essential oil extracted by different conditions. The contents of borneol (3.82%), terpinen-4-ol (0.3%) and caryophyllene oxide (2.2%) were relatively higher at $50^{\circ}C$ - 400 bar and the contents of ${\beta}$-bisabolene (5.88%), 1-octen-3-ol (0.31%), caryophyllene (2.91%), p-cymene (2.04%) and ${\gamma}$-terpinene (0.52%) were extracted relatively higher at $50^{\circ}C$ - 300 bar. The compositions of the essential oil extracted by SFE method of $50^{\circ}C$ - 200 bar condition contained relatively higher contents of thymol (77.63%) and carvacrol (5.65%). The contents of ${\alpha}$-bisabolol (0.17%), caryophyllene (6.46%), cis-${\alpha}$-bisabolene (1.52%) and ${\beta}$-bisabolene (20.65%) in the essential oil extracted by WSD method were relatively higher than compositions of the essential oil extracted by SFE method, and by SDE method we couldn't obtained essential oil. The results of this study could be utilized to reproduce scent close to original scent of T. magnus.

• Korean Journal of Food Science and Technology
• /
• v.37 no.2
• /
• pp.183-188
• /
• 2005

Effects of co-solvent polarity, citric acid, pressure, temperature, run time, and co-solvent ratio on extraction of major flavonoids from Lonicera Flos were investigated using supercritical fluid $CO_{2}(SF-CO_{2})$. HPLC analysis revealed addition of pure methanol resulted in low extraction yield of major flavonoids, luteoloin (Lu), Quercetin (Qu), Apigenin (Ap). Under same condition, as co-solvent polarity increased, yields of major flavonoids increased gradually, At optimum co-solvent extraction condirion of 60% aqueous methanol (10%, v/v), yields of Lu, Qu, and Ap were 42.09, 28.18, and 3.49 mg/100 g, respectively. Addition of citric acid to 60% aqueous methanol gave higher, with addition of 1% citrie acid resulting in highest yields of 63.2 (Lu), 39.35 (Qu), and 5.79 (Ap) mg/100 g. Optimum extraction conditions of major flavonoids were 200 bar, $50^{\circ}C$, 60 min, and $CO_{2}$-methanol-water(20: 1.8: 1.2).

• Journal of the Korean Wood Science and Technology
• /
• v.44 no.5
• /
• pp.705-715
• /
• 2016

The main aim of this study was to investigate the potential of wood charcoal on removing furan compounds (5-hydroxymethylfurfural (5-HMF), furfural) known as fermentation inhibitors in sugar hydrolysates obtained from supercritical water treatment of lignocellulosic biomass. For this aim, model hydrolysate was prepared, and removal rates of sugars or furan compounds depending on wood charcoal concentration and treatment time were calculated and analyzed in comparison with the case of activated carbon. 0.5, 1, 2, 4, 8, or 12% (w/v) of wood charcoal or activated carbon was loaded into the model hydrolysate, containing glucose, xylose, 5-HMF, and furfural, and treatment was conducted for 1, 3, 6, 12, or 24 h. After treatment, removal rates of 5-HMF and furfural gradually increased as wood charcoal concentration or treatment time increased, and over 95% of 5-HMF and furfural were removed at 8% of wood charcoal concentration and 3 h of treatment time, while the loss of sugars (< 2%) was hardly observed. On the other hand, in the case of activated carbon treatment, removal rates of 5-HMF and furfural were over 95% at mild condition (activated carbon concentration: 8%, treatment time: 1 h), but over 10% of glucose and xylose were removed. Therefore, considering sugar production and further process applied sugar, the wood charcoal treatment of sugar hydrolysate was more effective for removing furan compounds and maintaining the sugar yield.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.45 no.3
• /
• pp.319-331
• /
• 2019

This study was conducted to find a solvent, a extraction method and optimized conditions for Artemisia iwayomogi extract. which is effective to anti-inflammatory and antioxidant activity. A. iwayomogi extract by distilled water, ethanol, methanol, hexane and ethyl acetate using ultrasonic, high-pressure and supercritical extraction was investigated for NO inhibitory and DPPH radical scavenging activity. Extract obtained by ethanol and ultrasonic extraction method showed high NO production inhibitory activity, DPPH free radical scavenging activity and yield. Response surface methodology (RSM) was applied to find a optimized ultrasonic extraction conditions. Results showed that the optimum conditions for the higher yield were ethanol solvent of 45.71% concentration with extraction time and ultrasonic power of 63.33min and 308.84 W, respectively. This condition predicted 15.85% yield, but real yield was $16.40{\pm}0.28%$. The optimum conditions for simultaneous anti-inflammatory and antioxidant activity were established as ethanol concentration (80.81%), extraction time (90.00 min) and ultrasonic power (400.00 W). NO production inhibitory and antioxidant activity were $89.77{\pm}1.37%$ and $60.12{\pm}0.39%$, respectively. These results showed similar to the predicted values of 94.54%, 58.03% respectively.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.19 no.1
• /
• pp.94-131
• /
• 2007

A review on the papers published in the Korean Journal of Air-Conditioning and Refrigerating Engineering in 2004 and 2005 has been done. Focus has been put on current status of research in the aspect of heating, cooling, air-conditioning, ventilation, sanitation and building environment. The conclusions are as follows. (1) Most of fundamental studies on fluid flow were related with heat transportation of facilities. Drop formation and rivulet flow on solid surfaces were interesting topics related with condensation augmentation. Research on micro environment considering flow, heat, humidity was also interesting for comfortable living environment. It can be extended considering biological aspects. Development of fans and blowers of high performance and low noise were continuing topics. Well developed CFD and flow visualization(PIV, PTV and LDV methods) technologies were widely applied for developing facilities and their systems. (2) The research trends of the previous two yews are surveyed as groups of natural convection, forced convection, electronic cooling, heat transfer enhancement, frosting and defrosting, thermal properties, etc. New research topics introduced include natural convection heat transfer enhancement using nanofluid, supercritical cooling performance or oil miscibility of $CO_2$, enthalpy heat exchanger for heat recovery, heat transfer enhancement in a plate heat exchanger using fluid resonance. (3) The literature for the last two years($2004{\sim}2005$) is reviewed in the areas of heat pump, ice and water storage, cycle analysis and reused energy including geothermal, solar and unused energy). The research on cycle analysis and experiments for $CO_2$ was extensively carried out to replace the Ozone depleting and global warming refrigerants such as HFC and HCFC refrigerants. From the year of 2005, the Gas Engine Heat Pump(GHP) has been paid attention from the viewpoint of the gas cooling application. The heat pipe was focused on the performance improvement by the parametric analysis and the heat recovery applications. The storage systems were studied on the performance enhancement of the storage tank and cost analysis for heating and cooling applications. In the area of unused energy, the hybrid systems were extensively introduced and the life cycle cost analysis(LCCA) for the unused energy systems was also intensively carried out. (4) Recent studies of various refrigeration and air-conditioning systems have focused on the system performance and efficiency enhancement. Heat transfer characteristics during evaporation and condensation are investigated for several tube shapes and of alternative refrigerants including carbon dioxide. Efficiency of various compressors and expansion devices are also dealt with for better modeling and, in particular, performance improvement. Thermoelectric module and cooling systems are analyzed theoretically and experimentally. (5) According to the review of recent studies on ventilation systems, an appropriate ventilation systems including machenical and natural are required to satisfied the level of IAQ. Also, an recent studies on air-conditioning and absorption refrigeration systems, it has mainly focused on distribution and dehumidification of indoor air to improve the performance were carried out. (6) Based on a review of recent studies on indoor environment and building service systems, it is noticed that research issues have mainly focused on optimal thermal comfort, improvement of indoor air Quality and many innovative systems such as air-barrier type perimeter-less system with UFAC, radiant floor heating and cooling system and etc. New approaches are highlighted for improving indoor environmental condition as well as minimizing energy consumption, various activities of building control and operation strategy and energy performance analysis for economic evaluation.

• Journal of Nutrition and Health
• /
• v.52 no.6
• /
• pp.515-528
• /
• 2019

Purpose: This study examined the immunological activity and optimized the mixture conditions of Sargassum horneri (S. horneri) extracts in vitro and in vivo models. Methods: S. horneri was extracted using three different methods: hot water extraction (HWE), 50% ethanol extraction (EE), and supercritical fluid extraction (SFE). Splenocyte proliferation and cytokine production (Interleukin-2 and Interferon-γ) were measured using a WST-1 assay and enzyme-linked immunosorbent assay, respectively. The levels of nitric oxide and T cell activation production were measured using a Griess assay and flow cytometry, respectively. The natural killer (NK) cell activity was determined using an EZ-LDH kit. Results: Among the three different types of extracts, HWE showed the highest levels of splenocyte proliferation and cytokine production in vitro. In the animal model, three different types of extracts were administrated for 14 days (once/day) at 50 and 100 mg/kg body weight. HWE and SFE showed a high level of splenocyte proliferation and cytokine production in the with and without mitogen-treated groups, whereas EE administration did not induce the splenocyte activation. When RAW264.7 macrophage cells were treated with different mixtures (HWE with 5, 10, 15, 20% of SFE) to determine the optimal mixture ratio of HWE and SFE, the levels of nitric oxide and cytokine production increased strongly in the HWE with 5% and 10% of SFE containing group. In the animal model, HWE with 5% and 10% of SFE mixture administration increased the levels of splenocyte proliferation, cytokine production, and activated CD4⁺ cell population significantly, with the highest level observed in the HWE with 5% of SFE group. Moreover, the NK cell activity was increased significantly in the HWE with 5% of SFE mixture-treated group compared to the control group. Conclusion: The optimal mixture condition of S. horneri with immune-enhancing activity is the HWE with 5% of SFE mixture. These results confirmed that the extracts of S. horneri and its mixtures are potential candidate materials for immune enhancement.