• Magazine of RCR
• /
• 제16권4호
• /
• pp.44-49
• /
• 2021

• Proceedings of the Korean Nuclear Society Conference
• /
• 한국원자력학회 2002년도 추계학술발표회요약집
• /
• pp.393.1-393
• /
• 2002

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 한국방사성폐기물학회 2004년도 Proceedings of the 4th Korea-China Joint Workshop on Nuclear Waste Management
• /
• pp.106-113
• /
• 2004

A major problem of nuclear energy is the production of radioactive wastes. Needs for more environmentally favorable method to decontaminate radioactive contaminants make the use of liquid/Supercritical $CO_2$ as a solvent medium. In removing radioactive metallic contaminants under $CO_2$ solvent, two methods - use of chelating ligands and that of water in $CO_2$ emulsion - are possible. In the chelating ligand method, a combination of ligands that can make synergistic effects seems important. We discuss about the properties of microemulsion formed by F-AOT. By adding acid in water core, decontamination of metallic parts, soils were possible.

• Journal of Hydrogen and New Energy
• /
• 제26권1호
• /
• pp.8-14
• /
• 2015

In this study, the model biomass was used for hydrogen production by supercritical water gasification (SCWG). Model biomasses were glycerol, glycine, lignin and cellulose. The feed concentration was set to 1 wt%. Experiments were conducted in a reactor at $440^{\circ}C$ and above 26.3 MPa for 30 min. The effects of catalysts such as alkali metal salt ($K_2CO_3$ and $Na_2CO_3$) and transition metal salts ($Ni(NO_3)_2$, $Fe(NO_3)_3$ and $Mn(NO_3)_2$) on the gasification were systematically investigated. No tar or coke was observed in all experiments. The results showed that the gasification efficiency increased with various catalysts. For the cellulose and glycerol, all catalysts were effective for the promoted $H_2$ production compared with no catalyst. The significant decrease of $H_2$ production compared with no catalyst was observed with $Na_2CO_3$ and $Fe(NO_3)_3$ for glycine and lignin. respectively. The highest H2 production, 1.24 mmol was obtained for glycerol-SCWG with $Mn(NO_3)_2$. Conclusively, the addition of $Mn(NO_3)_2$ enhanced all model biomass gasification efficiency and increased the hydrogen production promoting the supercritical water reaction.

• Journal of the Korean Society of Food Science and Nutrition
• /
• 제39권7호
• /
• pp.1018-1023
• /
• 2010

This study was conducted to investigate quality changes of apple slab after pretreating with supercritical $CO_2$. L, a, b and color difference values were little changed at increasing temperature and pressure. Polyphenol oxidase was inhibited according to increment of supercritical $CO_2$ temperature and pressure. Springiness and hardness were increased at increasing pressure and temperature condition of pretreatment but hardness showed lower value than untreatment. The texture like sponge of dried apple slab was probably due to channels which were made during penetration and release of carbon dioxide.

• KSBB Journal
• /
• 제26권1호
• /
• pp.69-77
• /
• 2011

In this study, poly (L-lactic acid) (PLLA) microparticles containing gemcitabine hydrochloride were prepared by a supercritical fluid process, called aerosol solvent extraction system (ASES), utilizing supercritical carbon dioxide as antisolvent. The influence of process parameters such as temperature, pressure, $CO_2$ and solution flow rate, solution concentration, and feed ratio of drug to polymer on the morphology and characteristics of the microparticles was studied in detail. The gemcitabine-loaded microparticles exhibited a spherical shape with a smooth surface. The entrapment efficiency of gemcitabine increased with increasing temperature, solution concentration and $CO_2$ flow rate and with decreasing drug/polymer feed ratio. The maximum drug loading obtained from the ASES process was found to be about 11%. The ASES-processed PLLA microparticles containing gemcitabine showed a relatively high initial burst due to the presence of surface pores on the microparticles and the poor affinity between drug and polymer.

• KSBB Journal
• /
• 제16권4호
• /
• pp.327-331
• /
• 2001

Catechin compounds from the Green tea cultivated in Bosung (Chollanamdo) were extracted using supercritical fluid and various additives, and analyzed by reversed-phase high performance liquid chromatography (RP-HPLC). The chromatographic column was packed with LiChrospher 100RP-18(15 $\mu$m), and water was used as the mobile phase with 0.05% phosphoric acid and acetonitrile. Gradient election was applied to separate EGCG by changing the mobile phase compositions. Comparing the extraction yield of three different types of supercritical fluids, pure CO$_2$, with additives of water and ethanol (5 wt,%), the extraction amount of EGCG was most abundant in the suprcritical CO$_2$with ethanol. However, more was extracted and pure higher purity was achieved by solvent extraction using ethanol.

• Clean Technology
• /
• 제14권3호
• /
• pp.153-159
• /
• 2008

The solubility of triclosan, an anti-acne agent was measured in supercritical carbon dioxide ($scCO_2$) with a variable volume view cell at 313.15, 323.15, and 333.15 K and at pressures between 10 and 40 MPa. We successfully correlated triclosan solubility in $scCO_2$ using the quasi-chemical nonrandom lattice fluid (QLF) equation of state. Triclosan was micronized using the rapid expansion of supercritical solutions (RESS) process. The effects of temperature and pressure on particle size were investigated using phase behavior data and correlated results from the QLF model.

• Textile Coloration and Finishing
• /
• 제31권3호
• /
• pp.147-154
• /
• 2019

In this study, poly(ethylene terephthalate)(PET) fibres dyed with Disperse Red 167 using supercritical $CO_2$ technology. The purpose of this study was to investigate relationship between PET fibers and supercritical $CO_2$ during dyeing. The effects of temperature, pressure, dyeing time and mass ratio between the dye and PET in the dyeing chamber were considered. Thermal and mechanical properties of the fibers were investigated. Tensile strength of dyed PET fibers decreased at higher temperature and pressure conditions. DSC and DMA results indicated that the Tg and Tm values decreased significantly when compared to the pure PET fibers. However, uniformly dyed PET fibers were typically observed.

• Journal of the Semiconductor & Display Technology
• /
• 제16권2호
• /
• pp.55-60
• /
• 2017

The supercritical $CO_2$ (sc-$CO_2$) mixture and the sc-$CO_2$-based Photoresist(PR) stripping(SCPS) process were applied to the removal of the post etch/ash PR residue on aluminum patterned wafers and the results were observed by scanning of electron microscope(SEM). In the case of MDII wafers, the carbonized PR was able to be effectively removed without pre-stripping by oxygen plasma ashing by using sc-$CO_2$ mixture containing the optimum formulated additives at the proper pressure and temperature, and the same result was also able to be obtained in the case of HDII wafer. It was found that the efficiency of SCPS of ion implanted wafer improved as the temperature of SCPS was high, so a very large amount of MEA in the sc-$CO_2$ mixture could be reduced if the temperature could be increased at condition that a process permits, and the ion implanted photoresist(IIP) on the wafer was able to be removed completely without pre-treatment of plasma ashing by using the only 1 step SCPS process. By using SCPS process, PR polymers formed on sidewalls of metal conductive layers such as aluminum films, titanium and titanium nitride films by dry etching and ashing processes were removed effectively with the minimization of the corrosion of the metal conductive layers.