• Proceedings of the Korean Information Science Society Conference
• /
• 2007.10d
• /
• pp.366-371
• /
• 2007

무선 센서 네트워크는 경제적, 환경적 목적으로 다양한 방면에서 활용되고 있다 이 때, 배치된 각 센서의 위치를 파악하는 것은 센서 네트워크에서 가장 기본적이며 가장 중요한 문제 중의 하나이다. 기존 논문에서 제안된 센서 위치 측정 방법은 특별한 장비를 장착하거나 특정한 환경의 지역에 한정시킨 방범으로 제한하고 있는 경우가 대부분이다. 하지만 어떠한 관심 지역의 환경은 언제라도 바뀔 수 있다. 또한, 센서가 위치할 환경의 기온, 풍속 등을 미리 안다는 것은 비현실적인 가정이다. 더구나 각각의 센서에 특별한 장비를 장착한다는 것은 비용 절감을 이유로 센서 네트워크를 운영하는 경우 오히려 그것을 이용하지 않는 경우보다 비용이 더 들 수도 있다. 이에 본 논문에서는 센서 노드의 기본적인 통신 기능은 이용하여, 환경에 순응적으로 센서의 위치를 측정할 수 있는 방법을 제안하고자 한다. 센서 노드에서 기본적으로 제공하는 통신 기능은 RF 전파를 보낼 때 전송 레벨을 달리하여 보낼 수 있다. 이러한 기본적인 기능을 이용하여 위치를 측정하게 되면 전체적인 센서 네트워크의 비용이 절감될 뿐만 아니라 환경에 순응적인 위치 측정이 가능하게 된다. 또한, 각 노드의 위치가 정해진 후 다른 노드와 통신할 때 전파의 세기를 조정함으로써 RF 통신에서 소모되는 전력량을 줄일 수 있다. 따라서 본 논문에서 제안하는 전송 레벨을 이용한 위치 측정 방법은 단순히 위치를 측정한다는 의미뿐 아니라 환경에 순응적으로 작동한다는 장점이 있다. 향후 네트워크 내에서 통신에 소비되는 전력을 줄일 수 있다는 점에서도 중요한 의미를 지닌다.를 집행하는 caspase의 활성 형태인 cleaved caspase-8, -9, -7, -3의 단백질 수준이 목향 헥산추출물의 처리에 의해 증가하였고 caspase-3의 표적 단백질 중 하나인 PARP의 불활성 형태인 cleaved PARP의 단백질 수준도 현저하게 증가하였다. 이 결과들은 목향 헥산 추출물이 LNCaP 세포의 apoptosis를 유도함으로써 전립선 암세포의 증식을 억제함을 보여주는 것이며 목향 헥산추출물에 의한 apoptosis 유도는 caspase 활성 증가와 Bak 및 t-Bid 단백질의 증가에 의한 것임을 제시한다. 따라서 앞으로 항암효과를 나타내는 성분의 동정 및 동물실험을 통하여 좀 더 면밀한 기전 연구가 수행된다면 목향 헥산추출물은 화학적 암예방 물질이나 치료제로 개발될 수 있을 것으로 사료된다.적 분해층과 마모질이가 가장 깊은 것으로 나타났으며 flowable type의 복합레진과 컴포머는 표면 경도와 마모도에서 양호한 결과를 보였다. 이상의 결과 복합레진과 컴포머의 평가요소로서 마모도와 함께 가수분해도 고려되어야 할 것으로 사료된다.증후군 환자에서 대조군에 비해 높은 비율을 보였다.er thinning은 3 군모두에서 관찰되었고 항암 3 일군이 가장 심하게 나타났다. 이상의 실험결과를 보면 술전 항암제투여가 초기에 시행한 경우에는 조직의 치유에 초기 5 일정도까지는 영향을 미치나 7 일이 지나면 정상범주로 회복함을 알수 있었고 실험결과 항암제 투여후 3 일째 피판 형성한 군에서 피판치유가 늦어진 것으로 관찰되어 인체에서 항암 투여후 수술시기는 인체면역계가 회복하는 시기를 3

• KIPS Transactions on Software and Data Engineering
• /
• v.4 no.4
• /
• pp.151-160
• /
• 2015

Internet-of-Things(IoT) is the computing environment to provide valuable services by interacting with multiple devices, where diverse devices are connected within the existing Internet infrastructure and acquire context information by sensing. As the concern of IoT has been increased recently, most of the industries develop many IoT devices. And, many people are focused on the IoT application that is utilizing different technologies, which are sensor network, communication technologies, and software engineering. Developing on-ground IoT application is especially even more active in progress depending on increasing of on-ground IoT devices because it is possible for them to access dangerous and inaccessible situation. However, There are a few studies related IoT. Moreover, since on-ground IoT application, which is different from typical software application, has to consider device's characteristics, communication, and surround condition, it reveal challenges, decreasing reliability. Therefore, in this paper, we analyze reliability challenges related to maturity and fault tolerance, one of reliability attributes, occurring in developing on-ground IoT applications and suggest the effective solutions to resolve the challenges. To verify proposed the challenges and solutions, we show result that is applying the solutions to applications. By presenting the case study, we evaluate the effectiveness of applying the solutions to the application.

• Journal of Korean Society of Transportation
• /
• v.23 no.5 s.83
• /
• pp.123-134
• /
• 2005

This research aims at developing a new method which can replace the existing method. known as the quality factor(Q factor) method by an L-R-C test for use in the performance test of inductive loop detectors(ILD) being installed and maintained. In this study, a sensor to detect a magnetic field in terms of frequency and intensity, a method to collect field data, the method of analysis, and the method of diagnosis were developed. An automatic diagnosis system which was developed to overcome those drawbacks has the following features : First, field data is collected automatically by a test vehicle equipped with magnetic field sensors that is running can be said to along the roadway and. thus, the new system completely overcome the roadway and, thus, the new system can be said to completely overcome the inefficiency of the existing method second, since the magnetic fold generated from the ILD is the final output of the whole system of ILD, the existing problem has been solved. third. since each of the detection area by height is collected by the magnetic sensors installed by height. a basic for the identification of the vehicle types to be detectable and the setting of adjustment factors has been made. For the automatic diagnosis system developed during in this study, a reliability test was carried out by comparing vehicle times of ILD installed ideally.

• Journal of the Ergonomics Society of Korea
• /
• v.34 no.5
• /
• pp.541-548
• /
• 2015

Objective: We introduce a hand gesture segmentation method using a wrist-worn wearable device which can recognize simple gestures of clenching and unclenching ones' fist. Background: There are many types of smart watches and fitness bands in the markets. And most of them already adopt a gesture interaction to provide ease of use. However, there are many cases in which the malfunction is difficult to distinguish between the user's gesture commands and user's daily life motion. It is needed to develop a simple and clear gesture segmentation method to improve the gesture interaction performance. Method: At first, we defined the gestures of making a fist (start of gesture command) and opening one's fist (end of gesture command) as segmentation gestures to distinguish a gesture. The gestures of clenching and unclenching one's fist are simple and intuitive. And we also designed a single gesture consisting of a set of making a fist, a command gesture, and opening one's fist in order. To detect segmentation gestures at the bottom of the wrist, we used a wrist strap on which an array of infrared sensors (emitters and receivers) were mounted. When a user takes gestures of making a fist and opening one's a fist, this changes the shape of the bottom of the wrist, and simultaneously changes the reflected amount of the infrared light detected by the receiver sensor. Results: An experiment was conducted in order to evaluate gesture segmentation performance. 12 participants took part in the experiment: 10 males, and 2 females with an average age of 38. The recognition rates of the segmentation gestures, clenching and unclenching one's fist, are 99.58% and 100%, respectively. Conclusion: Through the experiment, we have evaluated gesture segmentation performance and its usability. The experimental results show a potential for our suggested segmentation method in the future. Application: The results of this study can be used to develop guidelines to prevent injury in auto workers at mission assembly plants.

• Tuberculosis and Respiratory Diseases
• /
• v.56 no.2
• /
• pp.144-150
• /
• 2004

Background : An assessment of the presence and the degree of reversibility of airflow obstruction is clinically important in patients with asthma or chronic obstructive pulmonary disease. However, the time responses of spirometric parameters in response to bronchodilator have not been well investigated. Methods: We studied 15 patients with asthma. Spirometric and mini-Wright peak expiratory flow measurements were performed at 15, 30, 45, and 60 minutes after using single dose($200{\mu}g$) of inhaled bronchodilator, salbutamol. Results : The mean values of forced expiratory volume in one second($FEV_1$) and forced vital capicaty(FVC) were significantly increased at 60 minutes after using bronchodilator in comparison to 15 minutes. And peak expiratory flow rate measured by either mass flow sensor or mini-Wright peak flow meter were significantly increased at 45 minutes after using bronchodilator in comparison to 15 minutes. Conclusions : To appropriate evaluation of the bronchodilator response in patients with reversible airflow limitation, it would be useful measuring either $FEV_1$ or PEF at the later time point 60 or 45 minutes in comparison to 15 minutes after using bronchodilator.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.45 no.6
• /
• pp.94-105
• /
• 2008

Numerous platforms have been developed for ZigBee-based network embedded systems. Also, operating systems like TinyOS have been installed to facilitate efficient implementation of wireless sensor network applications which collect data, and/or execute commands. First of all, porting an operating system on a new platform may need invention of a substitute for a required but unsupported hardware component. This paper presents a multiplexed virtual system timer for a platform without a counter comparator which we have contrived to emulate by using an extra counter. Such porting also injects unexpected faults which cause a variety of painful failures. Unfortunately, TinyOS requires to handle a lot of asynchronous hardware interrupts which are hard to trace during debugging. Besides, simulators are not available for a new platform since the models of hardware on the platform are not usually developed, yet. We propose novel instrumentation techniques which can be used to effectively trace the bugs in such lack of debugging environment. These techniques are used to identify and fix a great deal of nasty issues in porting TinyOS 2.0 on MG2400 and MG2455 platforms made by RadioPulse Inc.

• Journal of the Korean Vacuum Society
• /
• v.17 no.2
• /
• pp.130-137
• /
• 2008

$La_{0.7}Sr_{0.3}MnO_3$ films were deposited on $SiO_2$/Si and Si substrates annealed at $350^{\circ}C$ by rf magnetron sputtering. The oxygen gas flow rates were varied as 0, 40, and 80 sccm. Without post annealing process, $La_{0.7}Sr_{0.3}MnO_3$ thin films on $SiO_2$/Si and Si substrates were polycrystalline with (100), (110), and (200) growth planes. The grain size of $La_{0.7}Sr_{0.3}MnO_3$ thin films was increased with increasing oxygen gas flow rate. The sheet resistance of $La_{0.7}Sr_{0.3}MnO_3$ thin films was decreased with oxygen flow rate due to the increased grain size which induced a reduction of grain boundary. TCR (temperature coefficient of resistance) values of $La_{0.7}Sr_{0.3}MnO_3$ thin films were obtained from -2.0% to -2.2%.

• Economic and Environmental Geology
• /
• v.41 no.1
• /
• pp.81-92
• /
• 2008

Fonualei Rift and Spreading Center(FRSC) and Mangatolu Triple function(MTJ) caldera are located in northeastern part of Lau basin which is the active back-arc basin. Deep-tow and surface-tow magnetic surveys are carried out in FRSC. In deep-tow magnetic survey, to compensate for influence of uneven distance between bathymetry and sensor height, magnetic anomaly is continued upward to a level plane by using the Guspi method. We calculate crustal magnetization using Parker and Huestis's inversion algorithm, and try to find the hydrothermal vent and understand the structure of ocean floor crust. The result of deep-tow magnetic survey at FRSC showed that Central Anomaly Magnetization High(CAMH) recorded the max value of 4.5 A/m which is associated with active ridge. The direction of SSW-NNE corresponds with the direction of the principal spreading ridge in Lau basin. The low crustal magnetizaton$(174^{\circ}35.1'W,\;16^{\circ}38.4'S)$ of -4.0 A/m is supposed to correlate with submarine hydrothermal vent. Surface-tow magnetic data were collected in MTJ caldera$(174^{\circ}00'W,\;15^{\circ}20'S)$. The prevailing SSW-NNE direction of collapsing walls and the presence of CAMH at the center of caldera strongly indicate the existence of active spreading ridge in ancient times.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.20 no.2
• /
• pp.29-33
• /
• 2014

Active air flushing mini-pumps were installed in a rigid polypropylene container ($32cm{\time}23cm{\time}18cm$) containing 900 g of fresh green peppers for effectively controlling its $O_2$ concentration on real time basis to preserve the product quality. The performance of the constructed system was compared to that of the modified atmosphere (MA) container system with gas diffusion tube controlled in close/open cycles responding to real time $O_2$ concentration at 10 and $20^{\circ}C$. In the control logic, the $O_2$ concentration was programmed to be located exactly at 13% or stay in the range of 13-15%. The active air flushing system could control the $O_2$ concentration in the desired level or range at both temperatures, while the passive diffusion system could work only under the low temperature condition of $10^{\circ}C$. At higher temperature of $20^{\circ}C$, the passive diffusion system could not manage the produce respiration increased more highly than the gas transfer through the diffusion tube, resulting in too low $O_2$ concentration and too high $CO_2$ concentration which would be injurious to the green pepper. When tested at $20^{\circ}C$, the MA container system could preserve the green pepper better than the perforated air package in terms of weight loss, ascorbic acid and chlorophyll contents and firmness.

• Journal of Sensor Science and Technology
• /
• v.9 no.1
• /
• pp.28-35
• /
• 2000

In this study, we investigated the characteristics of polyurethane synthesis by simultaneously measuring resonant frequency and resonant resistance with a quartz crystal analyzer. The rapid decrease of resonant frequency was appeared because automatic catalytic reaction was caused by the polyurethane formed in initial stage of polyurethane synthesis. In prepolymer(PP) synthesis, the resonant frequency was slowly stabilized after a rapid decrease at a certain point of time. But in segmented polyurethane synthesis in which chain-extender was involved, the resonant frequency increased again after a rapid decrease at a certain point of time. It was considered that this tendency took place because the chain-extender, 1,4-butandiol, caused a soft segment to change to a hard segment. The resonant resistance was used in the analysis of mechanism. From the results, the characteristics of polyurethane synthesis could be analyzed on-line using a quartz crystal analyzer, and the synthesis mechanism could also be interpreted.