• Fire Science and Engineering
• /
• v.27 no.1
• /
• pp.31-38
• /
• 2013

The pressurized smoke control system is important for fire safety in building because it is directly concerned with egress time of people. Even though the damper plays an essential role in the pressurized smoke control system, the phenomena of backflow smoke occurs for a certain the damper position. The research for a position of damper effects on distribution of air flow at the fire door is not performed. In this study, numerical simulation using FDS 5.5 was carried out to analyze the effect of the position of damper on flow distribution at the fire door. To simulate real situation, effects of opening and closing of fire door was considered. As a result, when HRR was between 200 kW and 400 kW, in the case which the damper was on the opposite wall of the fire door, the back flow to the vestibules was large compared to the two other cases of damper position. But when HRR was above 400 kW, Effect on damper position was not occurred.

• The Journal of Korean Physical Therapy
• /
• v.23 no.5
• /
• pp.7-14
• /
• 2011

Purpose: The purpose of this study was to describe the movement patterns when lying from an erect stance to a supine position of healthy adults and hemiplegia patients in the age group from 50 to 70. Methods: The subjects used in this study were 230 patients (144 healthy adults and 86 hemiplegia patients). Movement patterns were classified using categorical descriptions of the action of three body regions: the upper extremity, lower extremity, and the head-trunk region. Results: In the most common supine lying position in healthy adults (29.7%), the female fifties age group performed a symmetrical pattern using the upper extremity region, a symmetrical squat pattern using the lower extremity region, and a symmetrical pattern using the head-trunk region (1-1-1). However, in the most supine lying position in hemiplegia patients (32.0%), the female sixties age group usually performed this pattern by using the upper extremity and lower extremity regions in a squat position by raising the leg, and performing rotation of the head-trunk region (3-4-3). Conclusion: Using this clinical therapy, and considering the patients ability to exercise when lying from an erect stance to a supine position, the proper care could be provided. Moreover, this therapy introduces action based on a variety of training methods and on the effects which might result from any changes.

• Journal of the Korean Society of Physical Medicine
• /
• v.9 no.3
• /
• pp.243-248
• /
• 2014

PURPOSE: This study was aim to the change of muscle activities of lower extremity and waist during lifting a small object on the floor according to different foot position of women in their twenties wearing a skirt. METHODS: 9 women in their twenties wearing a skirt were selected and were measured the muscle activities of medial gastrocnemius (MG), tibialis anterior (TA), vastus lateralis (VL) and iliocostalis (IC) when they lifted a small object on the floor. The two different foot position employed were "both feet posed straight side by side" (condition 1) and "both feet posed diagonally to 45 degree" (condition 2) used. The order of feet position was selected randomly and the subject took a rest for 30 min between tests to prevent muscle fatigue. We calculated the mean and standard deviation of muscle activities and used Mann-Whitney U test to compare the difference between the two foot positions with SPSS(IBM Korea) RESULTS: The muscle activity of condition 2 was greater than that of condition 1 in right side of TA, VL, and IC and left side of TA, VL, MG and IC. The right side of TA, VL and left side VL were significant difference between condition 1 and condition 2(p<.05). CONCLUSION: We suggest "both feet posed straight side by side" position is better if a woman wearing a skirt lift the small object and it will help prevent the low back and lower limb problems in the future.

• Journal of the Korean Society for information Management
• /
• v.31 no.2
• /
• pp.121-142
• /
• 2014

This study aims to investigate the importance of author keyword with analysis the position of author keyword in journal. In the first stage, an analysis was carried out on the position of author keyword. We examined the importance of author keyword by using degree centrality, closeness centrality, betweenness centrality, eigenvector centrality and effective size of structural hole. In the next stage, We performed analysis on correlation between network centrality measures and the position of author keyword. The result of correlation analysis on network centrality measures and the position of author keyword shows that there are the more significant areas of the result of the correlation analysis on degree centrality, betweenness centrality and the position of keyword. In addition, These results show that we need to consider that the possible way as measuring the importance of author keyword in journal is not only a term frequency but also degree centrality and betweenness centrality.

• Imaging Science in Dentistry
• /
• v.46 no.2
• /
• pp.133-139
• /
• 2016

Purpose: The aim of this study was to compare the coordinates of anatomical landmarks on cone-beam computed tomographic (CBCT) images in varied head positions before and after reorientation using image analysis software. Materials and Methods: CBCT images were taken in a normal position and four varied head positions using a dry skull marked with 3 points where gutta percha was fixed. In each of the five radiographic images, reference points were set, 20 anatomical landmarks were identified, and each set of coordinates was calculated. Coordinates in the images from the normally positioned head were compared with those in the images obtained from varied head positions using statistical methods. Post-reorientation coordinates calculated using a three-dimensional image analysis program were also compared to the reference coordinates. Results: In the original images, statistically significant differences were found between coordinates in the normal-position and varied-position images. However, post-reorientation, no statistically significant differences were found between coordinates in the normal-position and varied-position images. Conclusion: The changes in head position impacted the coordinates of the anatomical landmarks in three-dimensional images. However, reorientation using image analysis software allowed accurate superimposition onto the reference positions.

• Nuclear Engineering and Technology
• /
• v.48 no.6
• /
• pp.1291-1302
• /
• 2016

This paper presents a new and efficient scheme to determine the optimal neutron source position in a model near-equilibrium pressurized water reactor, which is based on the OPR1000 Hanul Unit 3 Cycle 7 configuration. The proposed scheme particularly assigns importance of source positions according to the local adjoint flux distribution. In this research, detailed pin-by-pin reactor adjoint fluxes are determined by using the Monte Carlo KENO-VI code from solutions of the reactor homogeneous critical adjoint transport equations. The adjoint fluxes at each allowable source position are subsequently ranked to yield four candidate positions with the four highest adjoint fluxes. The study next simulates ex-core detector responses using the Monte Carlo MAVRIC code by assuming a neutron source is installed in one of the four candidate positions. The calculation is repeated for all positions. These detector responses are later converted into an inverse count rate ratio curve for each candidate source position. The study confirms that the optimal source position is the one with very high adjoint fluxes and detector responses, which is interestingly the original source position in the OPR1000 core, as it yields an inverse count rate ratio curve closest to the traditional 1/M line. The current work also clearly demonstrates that the proposed adjoint flux-based approach can be used to efficiently determine the optimal geometry for a neutron source and a detector in a modern pressurized water reactor core.

• Physical Therapy Korea
• /
• v.26 no.3
• /
• pp.84-90
• /
• 2019

Background: Ankle evertor muscles are important for preventing lateral ankle sprain. Since, the evertor muscles cross the ankle and toe joints, the position at which the ankle evertor muscle strength is measured is important. However, no studies have previously investigated the effect of ankle and toe positions on the strength of the ankle evertor muscle. Objects: This study is aimed to determine the effect of various ankle and toe joint positions on the strength of the ankle evertor muscles in healthy subjects. Methods: Eighteen healthy subjects participated in this study. Isometric ankle evertor strength of the dominant leg was determined in each subject in different ankle and toe positions (dorsiflexion (DF) with toe extension (TE), DF with toe flexion (TF), plantar flexion (PF) with TE, and PF with TF). A 2 by 2 repeated analysis of variance (ANOVA) was used to determine the difference in the evertor strength between the ankle positions (PF and DF) and toe positions (TE and TF). Results: The results indicate that there was no significant ankle position by toe position interaction effect (p=.83). However, the ankle evertor strength was significantly increased in the ankle DF position than in the PF position (p<.01), and the ankle evertor strength during eversion with TE was significantly higher than eversion with TF (p<.01). Conclusion: The findings of this study suggest that clinicians should consider the ankle and toe positions when measuring the muscle strength and during performance of selective muscle strengthening exercises of the ankle evertor muscles.

• 한국정보통신설비학회:학술대회논문집
• /
• 2009.08a
• /
• pp.309-313
• /
• 2009

In this paper, the network performance of a turbo coded optical code division multiple access (CDMA) system with cross-layer, which is between physical and network layers, concept is analyzed and simulated. We consider physical and MAC layers in a cross-layer concept. An intensity-modulated/direct-detection (IM/DD) optical system employing pulse position modulation (PPM) for satellite broadcasting communications is considered. In order to increase the system performance, turbo codes composed of parallel concatenated convolutional codes (PCCCs) is utilized. The network performance is evaluated in terms of bit error probability (BEP). From the simulation results, it is demonstrated that turbo coding offers considerable coding gain with reasonable encoding and decoding complexity. Also, it is confirmed that the performance of such an optical CDMA network can be substantially improved by increasing the interleaver length and the number of iterations in the decoding process. The results of this paper can be applied to implement the satellite broadcasting communications.

• Proceedings of the KSRS Conference
• /
• 2007.10a
• /
• pp.207-210
• /
• 2007

A part of the big differences between LEO(Low Earth Orbit) and GEO(Geostationary Earth Orbit) satellite is that transfer orbit is used or not or what tolerance of the position on the mission orbit is permitted. That is to say, the transfer orbit is not used and the constraint of orbit position is not adapted on LEO satellite. Whereas for GEO satellite case, the transfer orbit shall be used due to the very high altitude and the satellite shall be stayed in the station keeping box which is permitted on the mission orbit. These phases are functions for AOCS mission. The aim of this paper is to introduce the AOCS hardware configuration for COMS (Communication, Ocean and Meteorological Satellite). The AOCS hardware of COMS consist of 3 Linear Analogue Sun Sensors (LIASS), 3 Bi-Axis Sun Sensors (BASS), 2 Infra-Red Earth Sensors (IRES), 3 Fiber Optical Gyroscopes (FOG), 5 momentum wheels and 14 thrusters. In this paper, each component is explained how to be used, how to locate and what relation between the AOCS algorithm and these components.

• Korean Journal of Applied Biomechanics
• /
• v.15 no.3
• /
• pp.61-70
• /
• 2005

The purpose of study was to investigate the kinematic variables of Kenmotsu motion in Parallel bars. To this study, by 3 dimensional kinematical analysis of 4 male national gymnasts participants in the 28th Athens Olympic Game in 2004, kinematic data collected using video camera. Coordinate data were smoothed by using a fourth-order Butterworth low pass digital filter with cutoff frequency of 6Hz. The conclusions were as follows. 1. In P2, because the constrained swing movement made the movement of a rising back difficult7, the movements of Reg. were performed at low position after Air phase. 2. In E5 event, for the shake of a stable handstand and applied techniques like a Belle(E-value), a Belle Piked(super E-value), a vertical velocity in E2, a horizontal velocity in E3 and a vertical velocity in E4 were necessary for high velocities. 3. In E4 event, it was appeared that for a flexible body's movement of a vertical up-flight, the large angle of the shoulder joint and the flexion & extension of the hip joint were necessary in Air phase and a long flight time and vertical displacement made Reg. movements stable at the high position.