• Title/Summary/Keyword: sumi

Search Result 137, Processing Time 0.022 seconds

Experimental and Numerical Studies on the Possibility of Duct Flow Low-power Generation Using a Butterfly Wind Turbine

  • Hara, Yutaka;Kogo, Shohei;Takagaki, Katsuhiro;Kawanishi, Makoto;Sumi, Takahiro;Yoshida, Shigeo
    • International Journal of Fluid Machinery and Systems
    • /
    • v.10 no.1
    • /
    • pp.19-29
    • /
    • 2017
  • An objective of this study is to demonstrate the validity of using a small wind turbine to recover the fluid energy flowing out of an exhaust duct for the generation of power. In these experiments, a butterfly wind turbine of a vertical axis type (D = 0.4 m) is used. The output performance is measured at various locations relative to the exit of a small wind tunnel (W = 0.65 m), representing the performance expected in an exhaust duct flow. Two-dimensional numerical analysis qualitatively agrees with the experimental results for the wind turbine power coefficient and rate of energy recovery. When the turbine is far from the duct exit (more than 2.5 D), an energy recovery rate of approximately 1.3% is obtained.

Framework Design of Pervasive Computing System for Inter Space Interactions between Private and Public Smart Spaces

  • Lim, Shin-Young;Chung, Lawrence;Helal, Sumi;Yang, Hen-I
    • International Journal of Fuzzy Logic and Intelligent Systems
    • /
    • v.9 no.3
    • /
    • pp.198-205
    • /
    • 2009
  • In this paper, design of framework architecture of pervasive computing system providing seamless inter space interactions between private and public smart spaces is presented. The seamless inter space interaction issues are related to establishing user's service environment by allocating relevant resources in a new location where there are no prior settings for the user or where there are current users already being served in the new location. In the realm of pervasive computing, we can have different types of smart spaces, offering proactive and intelligent services, which are islands of smart spaces independent from each other. As users move about, they will have to roam from private smart space to public smart space and vice versa. When they enter a new island of smart space, they will have to setup their devices and service manually to get the same or different services they had at the previous location. Users might be living in a non-pervasive computing environment because this manual operation is inappropriate to its generic features of proactive and intelligent services of pervasive computing. The framework architecture will provide seamless inter space interactions initiated by changes in users' location to acquire negotiations of resources for new and current residents regarding service provision with limited available networked devices.

Networked Robots using ATLAS Service-Oriented Architecture in the Smart Spaces

  • Helal, Sumi;Bose, Raja;Lim, Shin-Young;Kim, Hyun
    • International Journal of Fuzzy Logic and Intelligent Systems
    • /
    • v.8 no.4
    • /
    • pp.288-298
    • /
    • 2008
  • We introduce new type of networked robot, Ubiquitous Robotic Companion (URC), embedded with ATLAS Service-oriented architecture for enhancing the space sensing capability. URC is a network-based robotic system developed by ETRI. For years of experience in deploying service with ATLAS sensor platform for elder and people with special needs in smart houses, we need networked robots to assist elder people in their successful daily living. Recently, pervasive computing technologies reveals possibilities of networked robots in smart spaces, consist of sensors, actuators and smart devices can collaborate with the other networked robot as a mobile sensing platform, a complex and sophisticated actuator and a human interface. This paper provides our experience in designing and implementing system architecture to integrate URC robots in pervasive computing environments using the University of Florida's ATLAS service-oriented architecture. In this paper, we focus on the integrated framework architecture of URC embedded with ATLAS platform. We show how the integrated URC system is enabled to provide better services which enhance the space sensing of URC in the smart space by applying service-oriented architecture characterized as flexibility in adding or deleting service components of Ubiquitous Robotic Companion.

Changes in Isozyme Patterns of Peroxidase and Esterase during the Microtuberization of Potato(Solanum tuberosum) (감자(Solanum tuberosum)의 기내 소괴경 형성 단계에 따른 Peroxidase와 Esterase 동위효소의 양상 변화)

  • 정현숙
    • Journal of Plant Biology
    • /
    • v.36 no.1
    • /
    • pp.51-57
    • /
    • 1993
  • The microtuber was efficiently formed on SH medium containing 9% sucrose from the in vitro propagated shoot of potato (Solanum tuberosum cv. Sumi). In order to investigate gene expression depending on the development stage of microtuber, we examined the changes of peroxidase and esterase activities, and their isozyme patterns as well. Peroxidase and esterase activities were the highest at the 7 day-culture of the microtuber and subsequently decreased on the stage of microtuberization, whereas esterase activity increased at the stage of 60 day-culture. However, their activities in the ordinary tuber were higher than those of 60 day-cultured microtuber. In addition, in the peroxidase isozyme pattern two new bands of pI 7.05 and pI 4.65 were appeared at the 15- day and 60 day-cultures, respectively, as shown by isoelectric focusing. Various bands in the sterase isozyme pattern were shown at the 7 day-culture, and the band patterns were a large difference, comparing those of shoot and tuber. New bands in the esterase isozyme pattern also appeared at the 15 day- (pI4.52) and 60 day-cultures (pI 4.48). These results suggest that the changes of peroxidase and esterase activities and isozyme patterns are an important factor in the differentiation and development of potato.

  • PDF

Knowledge Model for Disaster Dataset Navigation

  • Hwang, Yun-Young;Yuk, Jin-Hee;Shin, Sumi
    • Journal of Information Science Theory and Practice
    • /
    • v.9 no.4
    • /
    • pp.35-49
    • /
    • 2021
  • In a situation where there are multiple diverse datasets, it is essential to have an efficient method to provide users with the datasets they require. To address this suggestion, necessary datasets should be selected on the basis of the relationships between the datasets. In particular, in order to discover the necessary datasets for disaster resolution, we need to consider the disaster resolution stage. In this paper, in order to provide the necessary datasets for each stage of disaster resolution, we constructed a disaster type and disaster management process ontology and designed a method to determine the necessary datasets for each disaster type and disaster management process step. In addition, we introduce a method to determine relationships between datasets necessary for disaster response. We propose a method for discovering datasets based on minimal relationships such as "isA," "sameAs," and "subclassOf." To discover suitable datasets, we designed a knowledge exploration model and collected 651 disaster-related datasets for improving our method. These datasets were categorized by disaster type from the perspective of disaster management. Categorizing actual datasets into disaster types and disaster management types allows a single dataset to be classified as multiple types in both categories. We built a knowledge exploration model on the basis of disaster examples to ensure the configuration of our model.

Toxicometallomics of Cadmium, Manganese and Arsenic with Special Reference to the Roles of Metal Transporters

  • Himeno, Seiichiro;Sumi, Daigo;Fujishiro, Hitomi
    • Toxicological Research
    • /
    • v.35 no.4
    • /
    • pp.311-317
    • /
    • 2019
  • The transport systems for metals play crucial roles in both the physiological functions of essential metals and the toxic effects of hazardous metals in mammals and plants. In mammalian cells, Zn transporters such as ZIP8 and ZIP14 have been found to function as the transporters for Mn(II) and Cd(II), contributing to the maintenance of Mn homeostasis and metallothionein-independent transports of Cd, respectively. In rice, the Mn transporter OsNramp5 expressed in the root is used for the uptake of Cd from the soil. Japan began to cultivate OsNramp5 mutant rice, which was found to accumulate little Cd, to prevent Cd accumulation. Inorganic trivalent arsenic (As(III)) is absorbed into mammalian cells via aquaglyceroporin, a water and glycerol channel. The ortholog of aquaporin in rice, OsLsi1, was found to be an Si transporter expressed in rice root, and is responsible for the absorption of soil As(III) into the root. Since rice is a hyperaccumulator of Si, higher amounts of As(III) are incorporated into rice compared to other plants. Thus, the transporters of essential metals are also utilized to incorporate toxic metals in both mammals and plants, and understanding the mechanisms of metal transports is important for the development of mitigation strategies against food contamination.

The Effect of Corporate Social Responsibility on Religiosity, Individual Social Responsibility, and Corporate Financial Performance in South Korea

  • JANG, Sumi
    • The Journal of Asian Finance, Economics and Business
    • /
    • v.8 no.8
    • /
    • pp.525-532
    • /
    • 2021
  • The study investigates the mediating effect of Korean firms' corporate social responsibility (CSR) in the relationship between Korean executives' religiosity, their individual social responsibility (ISR), and corporate financial performance (CFP). As executives lead the firms' strategies and policies, their religiosity or ISR may have a significant influence in attaining the firm's CSR and influencing CFP. The upper echelon theory, agency theory, and stakeholder theory are used to explain the link between individual-level drivers of CSR, a firm's CSR, and CFP. The upper echelon theory, agency theory, and stakeholder theory are integrated into the conceptual model, which explains the relationships between proposed constructs in this study. This study employs survey data of 421 Korean companies. The confirmatory factor analysis (CFA) technique was used to test the proposed hypotheses. The main result shows that Korean executives' religiosity and their ISR positively influence CFP when mediated by CSR. The findings of this study suggest that Korean executives' personal values such as their religiosity and ISR can impact the firm's CSR activities or financial performance. Overall, this paper responds to the recent calls in the CSR literature to examine the individual-level drivers from non-western contexts by shedding more light on the Korean context.

The relationship of mean temperature and 9 collected butterfly species' wingspan as the response of global warming

  • Na, Sumi;Lee, Eunyoung;Kim, Hyunjung;Choi, Seiwoong;Yi, Hoonbok
    • Journal of Ecology and Environment
    • /
    • v.45 no.4
    • /
    • pp.182-189
    • /
    • 2021
  • Background: Organism body size is a basic characteristic in ecology; it is related to temperature according to temperature-size rule. Butterflies are affected in various aspects by climate change because they are sensitive to temperature. Therefore, this study was conducted to understand the effect of an increase in temperature due to global warming on the wing of butterflies. Results: A total of 671 butterflies belonging to 9 species were collected from 1990 to 2016 in Seoul (336 specimens) and Mokpo (335 specimens). Consequently, as the mean temperature increased, the wing length of the species increased. However, there are exceptions that the Parnassius stubbendorfii, Pieridae canidia, and Pieris rapae wing length of Seoul increased, but the butterfly wing length of Mokpo decreased. Conclusions: The positive correlations between the butterfly wing length and mean temperature showed that the change of mean temperature for about 26 years affects the wing length of butterfly species. The exception is deemed to have been influenced by the limited research environment, and further studies are needed. We would expect that it can be provided as basic data for studying effect of climate change.

The effectiveness of home visiting programs for the prevention of child maltreatment recurrence at home: a systematic review and meta-analysis

  • Han, Kyeongji;Oh, Sumi
    • Child Health Nursing Research
    • /
    • v.28 no.1
    • /
    • pp.41-50
    • /
    • 2022
  • Purpose: This systematic review aimed to investigate the effectiveness of home visiting programs targeting parents who have maltreated their children on the prevention of child maltreatment recurrence. Methods: Major databases were searched (Ovid-Medline, PubMed, Cochrane Library, CINAHL, and RISS). The frequency of maltreatment was measured for the meta-analysis, which was conducted using Review Manager 5.2 software. The effect size was measured using odds ratios (ORs). Results: Six studies were included in the analysis, none of which were conducted in South Korea. The meta-analysis demonstrated that the risk of child maltreatment recurrence significantly decreased after a home visiting program was implemented (OR=0.45, 95% confidence interval [CI]=0.29-0.68). Nurses were the most common intervention providers. Conclusion: Home visiting programs should be provided for families in which maltreatment has already occurred to prevent the recurrence of maltreatment and foster a home environment in which children can live safely. Since the rate of child maltreatment in Korea is increasing, further research is needed to develop and implement home visiting programs in which nurses play a major role in preventing the recurrence of child maltreatment.

Development of New Ni-based Cast Superalloy with Low Density and High Temperature Capability for Turbine Wheel in Automotive Turbocharger (자동차 터보충전기 터빈휠용 경량 고내열 주조 Ni기 초합금의 개발)

  • Yutaro Oki;Yoshinori Sumi;Yoshihiko Koyanagi
    • Journal of Korea Foundry Society
    • /
    • v.42 no.6
    • /
    • pp.392-397
    • /
    • 2022
  • In order to compliant the stringent exhaust emission regulations, higher fuel efficiency and cleaner exhaust gas in combustion engines have been required. To improve combustion efficiency, an exhaust gas temperature is increasing, therefore higher temperature resistance is required for components in exhaust system, especially turbine wheel in turbocharger. IN100 looks quite attractive candidate as it has high temperature properties with low density, however it has low castability due to poor ductility at high temperature. In this study, the balance of Al and Ti composition was optimized from the base alloy IN100 to improve the high temperature ductility by expanding the γ single phase region below the solidification temperature, while obtaining the high temperature strength by maintaining the volume fraction of γ' phase equivalent to IN100 around 1000℃. Furthermore, the high temperature creep rupture life increased by adding a small amount of Ta. The alloy developed in this study has high castability, low density and high specific strength at high temperature.