• 제목/요약/키워드: sulfonate polyimide

검색결과 3건 처리시간 0.016초

전기방사 폴리이미드 나노섬유매트의 섬유배향이 이온전도도에 미치는 영향 (Effect of Fiber Orientation on Ionic Conductivity of Electrospun Polyimide Nanofibers Mats)

  • 허양일;김영희;안주현;이홍기;나창운
    • Elastomers and Composites
    • /
    • 제45권1호
    • /
    • pp.40-43
    • /
    • 2010
  • 본 연구에서는 전기방사 장치의 드럼형태 컬렉터의 회전속도를 조절함으로써 제조된 섬유가 랜덤 또는 배향성 (1축, 2축)을 갖는 폴리이미드(PI) 나노섬유 매트를 제조하였다. 제조된 PI 매트의 구조를 전자현미경(SEM)을 통해 관찰한 결과 전술한 배향성을 확인할 수 있었다. 1 M 리튬트리풀루오로-메탄-설포네이트와 테트라-에틸렌 글리콜디메틸 에테르의 혼합용액에 PI 매트를 침지시킨 후 이온전도기로 이온전도도를 측정하였다. 2축배향 매트가 가장 높은 이온전도도를 나타내었다. 1축 배향의 경우 이온의 이동방향과 수직방향이 평행방향보다 이온전도도가 낮게 나타났고, 아울러 일정한 주기성을 나타내었다. 주기성은 섬유간 거리와 이온 속도를 이용하여 설명할 수 있었다.

광가교성 Sulfonated Polyimide 전해질 고분자를 이용한 습도센서의 제조 및 특성 분석 (Preparation of Humidity Sensor Using Novel Photocurable Sulfonated Polyimide Polyelectrolyte and their Properties)

  • 임동인;공명선
    • 폴리머
    • /
    • 제36권4호
    • /
    • pp.486-493
    • /
    • 2012
  • 칼콘기를 포함하는 광가교성 sulfonated polyimide(SPI) 전해질 고분자를 칼콘기를 가지는 실란 커플링제가 처리된 알루미나 전극에 도포하여 습도센서를 제조하였다. SPI 필름 중 bis(tetramethyl)ammonium 2,2'-benzidinedisulfonate($Me_4N$-BDS)/4,4'-diaminochalcone(DAC)/pyromellitic dianhydride(PA)= 90/10/100 이루어진 습도센서는 20과 95 %RH 영역에서 4.48부터 $2.1k{\Omega}$까지 변화하며 좋은 직선성(Y = -0.04528X+7.69446, $R^2=0.99675$)을 보여주었다. 33 %RH와 94 %RH 사이에서 흡습과 제습과정의 응답속도는 약 79초이며, 가교화된 SPI 필름은 습도를 빠르게 검지할 수 있는 매우 효율적인 감습재료이다. 온도 의존성 계수는 $-0.49%RH/^{\circ}C$이며 습도센서로서 응용시 온도 보상이 필요하다. 또한 센서의 기재를 칼콘을 포함하는 실란 커플링제로 처리한 센서는 가교와 동시에 기재에 접합되어 480시간 이상 내수성, 고온과 고습 안정성 및 장기 안정성이 뛰어남을 알 수 있었다. 이렇게 가교화된 SPI는 상용화된 센서보다 우수한 특성을 보이는 재료로서 응용 가능성을 보여주었다.

말초 신경 신호 기록의 효율성 개선을 위한 전도성 폴리머가 적용된 생체삽입형 커프형 신경전극 (Implantable Nerve Cuff Electrode with Conductive Polymer for Improving Recording Signal Quality at Peripheral Nerve)

  • 박성진;이이재;윤광석;강지윤;이수현
    • 센서학회지
    • /
    • 제24권1호
    • /
    • pp.22-28
    • /
    • 2015
  • This study demonstrates a polyimide nerve cuff electrode with a conductive polymer for improving recording signal quality at peripheral nerve. The nerve cuff electrodes with platinum (Pt), iridium oxide (IrOx), and poly(3,4-ethylenedioxythiophene): p-toluene sulfonate (PEDOT:pTS) were fabricated and investigated their electrical characteristics for improving recorded nerve signal quality. The fabricated nerve cuff electrodes with Pt, IrOx, and PEDOT:pTS were characterized their impedance and CDC by using electrochemical impedance spectroscopy (EIS) and cyclic voltammetry. The impedance of PEDOT:pTS measured at 1 kHz was $257{\Omega}$, which was extremely lower than the value of the nerve cuff electrodes with IrOx ($15897{\Omega}$) and Pt ($952{\Omega}$), respectively. Furthermore, the charge delivery capacity (CDC) of the nerve cuff electrode with PEDOT:pTS was dramatically increased to 62 times than the nerve cuff electrode with IrOx. In ex-vivo test using extracted sciatic nerve of spaque-dawley rat (SD rat), the PEDOT:pTS group exhibited higher signal-to-interference ratio than IrOx group. These results indicated that the nerve cuff electrode with PEDOT:pTS is promising for effective implantable nerve signal recording.