• Land and Housing Review
• /
• v.10 no.4
• /
• pp.41-50
• /
• 2019

This study was started to study the buffer zone of Daejeon metropolitan city in order to study the policy and environment for the suitability evaluation of the use of green buffer zone. The target of the study was selected as the buffer zone of western buffer, which is frequently used in the Daejeon Metropolitan City, and a preliminary index was selected to evaluate the suitability of the green buffer zone. AHP analysis was conducted to increase the reliability of the preliminary indicators and the weight was analyzed by questionnaires to experts and practitioners. In addition, based on the existing statistical data, we rebuilt the green buffer zone and investigated the current condition, and compared and analyzed the green buffer zone and the places where they did not. The results are as follow. First, unlike the statute interpretation that construction can not be done in buffered green spaces, green buffer zones have been utilized in various ways. However, the lack of advanced citizen consciousness of the residents, the responsibility of the responsible person, and the problem of the management office alone are causing problems. Second, according to the results of AHP questionnaire analysis, functional and stability among the appropriateness indexes of green buffer zone utilization were evaluated highly. Park accessibility and utilization potential also weighed somewhat, and it was judged that the epochal trend was more important in the use of green buffer zones. Third, analysis of the status of Western green buffer zones in Daejeon showed that the utilization rate was more than half. This suggests the necessity of judging the appropriateness of the application of the green buffer zone effectively due to the change of the perception of the green buffer zone of the residents. Fourth, as a result of comparing and analyzing the site where the site is used and the site where it is not, it is found that it is used within a range that does not greatly affect each index. However, as the stability has decreased, we have decided that the utilization method is most damaging to the green zone, and we should strive to improve the stability in future. Finally, the analysis of a red clay road and a red clay road sites decreased from Class I of stability to Grade II. However, the fall figure showed a difference between the 13 % drop rate of the target location and the 5% decline rate of utilization. The difference was analyzed as the difference of width of a red clay road. This can be regarded as one of the ways of damaging the green zone to the minimum extent, which is a great advantage in selecting the future utilization plan.

• Journal of KIISE:Information Networking
• /
• v.32 no.3
• /
• pp.318-326
• /
• 2005

This paper presents the image feature extraction method and the image classification technique to select the harmful image flowed from the Internet by grade of image contents such as harmlessness, sex-appealing, harmfulness (nude), serious harmfulness (adult) by the characteristic of the image. In this paper, we suggest skin area detection technique to recognize whether an input image is harmful or not. We also propose the ROI detection algorithm that establishes region of interest to reduce some noise and extracts harmful degree effectively and defines the characteristics in the ROI area inside. And this paper suggests the multiple-SVM training method that creates the image classification model to select as 4 types of class defined above. This paper presents the multiple-SVM classification algorithm that categorizes harmful grade of input data with suggested classification model. We suggest the skin likelihood image made of the shape information of the skin area image and the color information of the skin ratio image specially. And we propose the image feature vector to use in the characteristic category at a course of traininB resizing the skin likelihood image. Finally, this paper presents the performance evaluation of experiment result, and proves the suitability of grading image using image feature classification algorithm.

• Clean Technology
• /
• v.17 no.4
• /
• pp.336-345
• /
• 2011

The total area of forest land in Korea is 64.2%, and significant forest resources can continuously be produced. However our country didn't separate the recyclable waste wood and was illegal landfill or incinerated. In this study, waste-wood and rice husk of biomass and low-grade-anthracite made refuse derived fuel by mixing and compressing. In addition, the binding effect of binders and additives were analyzed. Physical and chemical characteristics of manufactured refuse derived fuel were analyzed and evaluated suitability by compared with quality standards. A result of change with compressed and relaxed density, added 20% anthracite and 10% rice husk is optimal density change and average density increased large range when 20 wt.% P.V.A., guargum, molasses and 10 wt.% starch were added. All fuel samples be distributed over 3,500 kcal/kg LHV and grade of No. 3~4 fuels appeared. A result of the characteristics of physical and chemical compressed biomass refuse derived fuel with addictive, 12.9% of durability improvement appeared when is mixing asphalt and 5.8% of durability improvement appeared when is mixing rice bran by pretreatment of NaOH 5%.

• Journal of vocational education research
• /
• v.33 no.3
• /
• pp.105-125
• /
• 2014

The purposes of this study are to develop the standardized tests of career preparation behavior of career preparation behavior for college students. For these, the 'Career Preparation Behavior Scale for College Students' which was developed in 2011 was reviewed and revised. After 609 students were involved and analyzed for the pretest, 1,244 subjects were collected by taking into account gender, grade, major, and location of colleges for developing a standardized test. The Career Preparation Behavior Scale consisted of 3 subareas and 30 items: 11 items for learning area, 12 items for counseling and information collecting area, 7 items for employment action area. The levels of reliabilities, construct validity, discriminant validity, and the concurrent validity were relatively high. Also, the suitability index of the structural model was analyzed to check the structural significance. The degree of career reparation behavior among norm groups was increased in general according to the grades. Scores of students majoring in humanities and social sciences received significantly high scores compared with those of majoring in science and technology or in art and music. But the levels of satisfaction on career preparation behavior were no difference according to gender, grade, and major. 'The Standardized Career Preparation Behavior Scale for College Students' would be used for conducting career education or programs for college students in the future.

• Journal of the Korean Society of Earth Science Education
• /
• v.13 no.2
• /
• pp.175-185
• /
• 2020

The purpose of this study is to investigate the usages and problems of distance science learning and learner behavior analysis. This study established an Sixteen-weeks period of experimental treatment from March to June 2020, and the students who participated in the study formed a research group of 128 students in 2nd grade of their advanced classes who are attending the second semester of B university of education and taking courses in 'teaching research 1'. B university of education is singleness class that doesn't have compare group, so this study is constituted only study group. The results of the study were as follows. First, The students who took science learning remotely liked using the university's LMS system. Second, it was not efficient for the faculty member's scientific data presentation to operate smoothly in the online system. Third, it is necessary to set various educational platforms as a standardized platform. Looking at the pros and cons of various platforms may vary depending on the suitability of education, but if the LMS system, which is a professional teaching support method, is upgraded to meet the needs of learners, the satisfaction of higher instructors and learners will be higher.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.32 no.6 s.107
• /
• pp.14-22
• /
• 2005

The purpose of this paper is to assess conservation value of forests and cultivated areas from the landscape ecological point of view. The main focus of landscape ecology estimates the reciprocal relationships between spatial patterns and ecological processes. This paper sets the criteria for conservation value and classify the conservation value based on the criteria. Forests and cultivated areas in Seo-Gu, Incheon Metropolitan City was selected as the case study area. In this research, factors such as patch size and connectivity have been selected in order to consider the landscape ecological aspect, gradient for the environmental physics aspect and to consider the environment-ecological aspect, grade of environmental-oriented land suitability analysis Map developed by the ROK Ministry of Environment has been utilized. GIS methodologies have been adopted to calculate the relationships among the above variables. Through literature review, the following evaluation criteria have been adopted: (1) based on island biogeography and metapopulation dynamics theory, patch size criteria are set 2ha and 10ha; (2) connectivity was set the degree of connection with surrounding grids; and (3) gradient of 20 degrees. Conclusively, this paper suggests that local conditions, landscape ecology and physical environment aspects should be considered to develop an estimation framework of the conservation value.

• Journal of Welding and Joining
• /
• v.28 no.6
• /
• pp.63-69
• /
• 2010

The pre-heat free consumables for GMAW, SAW and FCAW processes that matche with the Cu-bearing PFS-700 steel which has yield strength over 700MPa were developed and evaluated to see the suitability in military such as submarine and battle ship. Explosion Bulge Test underwater was developed and applied to see the reliability of welded structure. All welding was conducted without pre-heat before welding, the interpass temperature was below $150^{\circ}C$ for all welding conditions. Tensile strength for the weld metal in GMAW, SAW and FCAW process is 887MPa, 875MPa and 813MPa, respectively, these values are similar to the base metal of PFS-700 steel of 838MPa. EBT results in GMAW, SAW and FCAW show 14.0%, 14.02% and 15.9% reduction of thickness without generation of crack, respectively and stand-off distance was set up properly to have over 14.0% reduction of thickness. Through EBT results, the developed new consumables are applicable to the weapon systems such as submarine and battle ship.

• Proceedings of the KWS Conference
• /
• 2010.05a
• /
• pp.63-63
• /
• 2010

The pre-heat free consumables for GMAW, SAW and FCAW processes that matches the Cu-bearing PFS-700 steel which has yield strength over 700MPa were developed and evaluated to see the suitability in military such as submarine and battle ship. Explosion bulge test in underwater was developed and applied to see the reliability of welded structure. All welding was conducted without pre-heat before welding, the interpass temperature was below $150^{\circ}C$ for all welding conditions. Tensile strength for the weld metal in GMAW, SAW and FCAW process is 887MPa, 875MPa and 813MPa, respectively, these values are similar to the base metal of PFS-700 steel of 838MPa. EBT results in GMAW, SAW and FCAW show 14.0%, 14.02% and 15.9% reduction of thickness without generation of crack, respectively and stand-off distance was set up properly to have over 14.0% reduction of thickness. Through EBT results, the developed new consumables are applicable to the weapon systems such as submarine and battle ship.

• Transactions of Materials Processing
• /
• v.29 no.4
• /
• pp.203-210
• /
• 2020

In this study, formability and springback behavior of 1.5 GPa grade ultra-high strength steel (UHSS) sheet were predicted through the finite element simulation, and structural stability of the forming dies was verified by the coupled forming-structural analysis. Uniaxial tension and uniaxial tension-compression tests were performed to obtain experimental data for modeling the springback properties of the sheet material. The springback values predicted by simulation were compared with those from actual measurements. The results calculated from the kinematic hardening model were found to be much more accurate than those from the isotropic hardening model. Deformation of the forming die and springback of the product were calculated by the coupled forming-structural analysis. The higher the strength of the die material, the smaller the surface displacement of the die and the springback of the product. The internal stresses of the dies made of three materials, FC300, FCD550 and STD11 were compared with the yield stress of each material. The results provided a basis for determining the most suitable material for each part of the die set. As a result, simulation techniques have been established for predicting formability and springback in the UHSS sheet forming process.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.17 no.3
• /
• pp.1-6
• /
• 2009

Since the success of the first flight, vast advancements have been made to the aircrafts with recent developments incorporating highly complex mechanisms, placing greater emphasis on the competence of the pilot. Studies are currently being undertaken to effectively source the trainee pilots with the most ideal level of aptitude for aviation with an aim to optimise the selection process with focus on economy and time, while research into identifying the optimal human characteristics for aviation is being done. As part of the selection process, number of tests is arranged with focus on the individual competence, suitability for flight, health status, aptitude and intelligence with the results of the tests used as reference materials during the selection procedure. This study has investigated the effect the academic competence has on the aptitude for aviation amongst many other abilities of human beings and the findings show that higher levels of aptitude have been demonstrated by the students who have displayed academic excellence across all the courses with statistics pointing to a positive correlation between the two subjects. This supports the theory that students who are academically superior have higher probability of being found to possess greater level of flight aptitude. The outcome of the study iterates the fact that academic competence of the students should not be regarded lightly in the selection process. Based on the current study, it is believed that a research into determining the relationship between the SAT results, average yearly grade and flight aptitude will help identify the key factors in possessing high level of flight aptitude with greater certainty.