• Animal Bioscience
• /
• v.35 no.9
• /
• pp.1400-1407
• /
• 2022

Objective: This research determined the chemical composition and the apparent and standardized ileal digestibility (AID and SID) of crude protein (CP) and amino acids (AA) in whole yeast and autolyzed yeast derived from sugarcane ethanol production fed to growing pigs. Methods: Six growing pigs were randomly allocated in a replicated 3×3 Latin square design with 3 diets and 3 periods of 7 days each, resulting in a total of 6 experimental replications. Three assay diets were formulated using whole yeast, autolyzed yeast, or soybean meal as the sole sources of dietary CP and AA. Pigs were allowed to adapt to the assay diets for 5 days. Thereafter, ileal digesta samples were collected continuously for 8 hours on days 6 and 7. Results: There was no difference in the chemical composition between whole yeast and autolyzed yeast, but whole yeast had low digestibility of CP and AA due to the presence of a rigid cell wall. As conducting autolysis can induce cell wall damage, the AID and SID of CP and AA were greater in autolyzed yeast than in whole yeast. Conclusion: The information obtained on the SID of CP and AA in both yeast products can be used for the accurate estimation of the bioavailability of CP and AA in feed formulations. The yeast products derived from sugarcane ethanol production are an alternative protein source in pig diets.

• Safety and Health at Work
• /
• v.14 no.3
• /
• pp.325-331
• /
• 2023

Background: Heat stress is a harmful physical hazard in many occupational settings. However, consequences of occupational heat exposure among workers in a sugarcane factory in Ethiopia are not well characterized. This study aimed to assess the level of occupational heat exposure-related symptoms and contributing factors. Methods: In this cross-sectional study, five workstations were selected for temperature measurement. Heat stress levels were measured using a wet-bulb globe temperature index meter. A stratified random sampling technique was used to select 1,524 participants. Heat-related symptoms were assessed using validated questionnaires. Results: The level of occupational heat exposure was 72.4% (95% CI: 70.2%-74.8%), while 71.6% (95% CI: 69.3%-74.9%) of participants experienced at least one symptom related to heat stress. The most common heat-related symptoms were swelling of hands and feet (78%), severe thirst (77.8%) and dry mouth (77.4%). The identified risk factors were a lack of reflective shields (AOR: 2.20, 95% CI: 1.53, 3.17), not-enclosed extreme heat sources (AOR: 1.76, 95% CI: 1.23, 2.51), a lack of access to shade (AOR: 9.62, 95% CI: 6.20, 14.92), and inappropriate protective clothing provision (AOR: 1.58, 95% CI: 1.27, 2.71). Conclusions: The burden of occupational heat exposure and heat-induced symptoms was high. Lack of reflective shields, the absence of enclosed extreme heat sources, a lack of access to shade, and inappropriate protective clothing provision were considerable attributes of heat stress. Therefore, the use of mechanical solutions to stop heat emissions at their sources and the key factors identified were areas for future intervention.

• Proceedings of the Korean Society of Near Infrared Spectroscopy Conference
• /
• 2001.06a
• /
• pp.1621-1621
• /
• 2001

The quality of sugarcane grown on the NE Australian tropical coast ($16^{\circ}$15'- $18^{\circ}$15' S Lat.) has declined markedly in the past seven years. This has been linked to dilution of mill-supply cane with increasing levels of non mature-stalk material consisting of leaves and sucker culms. The prime research objective was to examine the transition from the pre-harvest, in-field crop to harvested material sent for processing, in terms of quality and crop fraction proportions. A secondary objective was to quantify the effects of preharvest-season crop habit and culm condition on crop quality. Ten quadrat samples from each of 54 random crop sites (17 in 1999 and 37 in 2000), covering a wide range of variables (cultivar, crop class, and edaphic, topographic, climatic, and temporal factors) were collected immediately before harvest. Samples were partitioned into four fractions:- sound and unsound mature stalks (culms), sucker culms, and extraneous matter (leaves). Material harvested from each site was sampled and partitioned into four fractions:- sound and unsound billets (culm pieces), culm-spindle pieces, and leaf. In 2000, before harvest, 14 additional sites were sampled monthly, on three occasions, from March - June. Erect and non-erect culms were divided into sound and unsound classes. All samples were disintegrated and presented to a remote reflectance module of a scanning spectrophotometer using the BSES large cassette module. Near infra-red spectroscopic (NIS) analyses were developed for the rapid determination of quality components (Brix, commercial cane sugar (CCS), fibre, moisture, and polariscope reading). Calibrations for three material groups (culm (n = 639), non-culm (n = 496), and combined) were developed for all components using the 1999 data set. Two sub-sets (n = 178, and 190) of about 10% of the preharvest-season and harvest populations scanned in 2000 also were subjected to full routine laboratory analyses. The 1999 combined calibrations were excellent, but the culm calibrations produced consistently lower standard errors. Non-culm calibrations were marginally better than the combined for only CCS and pol. reading. Analysis of the 2000 culm data with calibrations using all 1999 and 2000 culm data resulted in better predictions relative to the 1999 culm calibrations. This also was true for the combined calibrations. Assessment of quality components in pre- and post-harvest sugarcane using NIS calibrations was more cost effective than using routine laboratory techniques. Outcomes from this NIS-facilitated research will have important economic consequences for the Australian sugarcane industry. Potential CCS present in mature culms is being discounted by dilution with leaves and sucker culms, threatening farm viability. The results question the efficacy of current harvesting technology. The CCS of harvested cane is improved only marginally over that of the in-field crop. Current harvesting technology requires either supplementary, innovative pre-mill processing or a design revolution to improve mill-supply cane quality, and therefore whole of industry economics. NIS-facilitated analyses, before the harvest season, highlighted the benefits of growing erect, sound crops. Loss of CCS then, can be minimized only by a combination of crop improvement and agronomic solutions, applied as part of sound on-farm management.

• Advances in materials Research
• /
• v.9 no.3
• /
• pp.203-218
• /
• 2020

This research paper presents the outcomes in terms of mechanical and microstructural characteristics of binary and ternary concrete when exposed to elevated temperature. Three parameter were taken into account, (a) elevated temperature (i.e., 200, 400, 600 and 800℃) (b) binary concrete with cementitious material sugarcane bagasse ash (SCBA) and ground granulated blast furnace slag (GGBFS) replacement percentage (i.e., 0, 15, 20, 25 and 30%) and (c) ternary concrete with cementitious material SCBA and GGBFS replacement percentage (i.e., 0, 15, 20, 25 and 30%). A total of 285 standard cube specimens (150 mm × 150 mm × 150 mm) containing Ordinary Portland Cement (OPC), SCBA, and GGBFS were made. These specimens then exposed to several elevated temperatures for 2 h, afterword is allowed to cool at room temperature. The following basic physical, mechanical, and microstructural characteristics were then determined and discussed. (a) mass loss ratio, (b) ultrasonic pulse velocity (UPV) (c) physical behavior, (d) compressive strength, and (e) field emission scanning electron microscope (FESEM). It was found that compressive strength increases up to 400℃; beyond this temperature, it decreases. UPV value and massloss decrease with increase in temperature as well as the change in color and crack were observed at a higher temperature.

• Mycobiology
• /
• v.37 no.4
• /
• pp.277-285
• /
• 2009

In this study, dual culture, poison agar, and direct methods were used to assess the ability of Trichoderma virens IMI-392430, T. pseudokoningii IMI-392431, T. harzianum IMI-392432, T. harzianum IMI-392433, and T. harzianum IMI-392434 to control Ceratocystis paradoxa, which causes the pineapple disease of sugarcane. The highest percentage inhibition of radial growth (PIRG) values were observed with T. harzianum IMI-392432 using two dual culture methods, 63.80% in Method I and 80.82% in Method II. The minimum colony overgrowth time was observed with T. harzianum IMI-392432 and the maximum was observed with T. pseudokoningii IMI-392431. Different concentrations of different day-old metabolites of Trichoderma isolates were tested against mycelial growth of C. paradoxa. The highest PIRG (84.685%) exhibited at 80% concentration of 30-day-old metabolites of T. harzianum IMI-392432 using the modified bilayer poison agar method. In the direct assay method the maximum mycelial growth weight (PIGW) was observed at the same concentration and the same day-old metabolites of T. harzianum IMI-392432. This study showed that Trichoderma isolates have a good antagonistic effect on C. paradoxa mycelial growth and T. harzianum IMI-392432 has the most potential to control the pineapple disease pathogen.

• Advances in environmental research
• /
• v.7 no.3
• /
• pp.225-237
• /
• 2018

The sorption of metal ions with low-cost adsorbents plays an important role in sustainable development. In the present study, the efficacy of sugarcane bagasse, rain tree fruits (samaneasaman), banana stem and their mixtures, used as bio-sorbents, in the removal of Cu(II) and Pb(II) ions from aqueous solution is evaluated. Batch studies are conducted, and residual ions were measured using Inductively Coupled Plasma (ICP)-atomic spectrometer. Effect of pH, initial metal ion concentration, reaction time and adsorbent dosage are studied. The Pb(II) removal efficiency was observed to be 97.88%, 98.60% and 91.74% for rain tree fruits, banana stem and a mixture of adsorbents respectively. The highest Cu(II) ion removal was observed for sugarcane bagasse sorbent with an efficiency of 82.10% with a pH of 4.5 and a reaction time of 90 min. Finally, desorption studies were carried out to study the leaching potential of adsorbent, and it was found that the adsorbent is stable in water than the other leaching agents such as HCl, ammonium acetate, Sodium EDTA. Hence, these adsorbents can be effectively used for the removal of these heavy metals.

• Journal of Distribution Science
• /
• v.21 no.7
• /
• pp.65-71
• /
• 2023

Purpose: This study attempted to analyze the impacts of the backward linkage and output multipliers, and investigate the price fluctuation and the price forecast amongst the manufacturing sectors associated with food processing industrial output of Thailand. Research design, data and methodology: The Thailand Input-Output table with a size of 180 x 180 sectors from 2005, 2010, and 2015 was utilized while the secondary data of the time series from January 2002 to December 2021 were processed via a multiplicative model and Box-Jenkins model. Results: The backward linkage analysis indicates that canning and preserving of the meat sector majorly utilized the factors of production from the slaughtering sector; canning and preservation of fish and other seafoods sector largely used those factors from the ocean and coastal fishing sector; and the sugar sector used those of the sugarcane sector. Notably, the output multiplier analysis indicated that output multipliers of those 3 manufacturing sectors were highly increased; meanwhile the price fluctuation continually existed in all forms. Besides, the price forecast suggested that prices of chicken and sugarcane tended to be higher; whereas, the price of shrimp was unstable. Conclusions: Food processing industry contains the favorable components to be one of the industries of the future of Thailand.

• Asian-Australasian Journal of Animal Sciences
• /
• v.15 no.10
• /
• pp.1422-1427
• /
• 2002

Fifteen crossbred cattle bulls of about 22-24 months age (mean body weight ranged from 291.0 to 298.1 kg) were randomly divided into 3 groups of 5 animals following randomized block design. Animals in group 1 were fed concentrate mixture containing wheat bran 97%, mineral mixture 2% and salt 1% plus ad libitum chopped green sugarcane tops (SCT) as a roughage source. Animals in group 2 were fed concentrate mixture containing lentil chuni 97%, mineral mixture 2% and salt 1% while group 3 concentrate contained wheat bran 48.5%, lentil chuni 48.5%, mineral mixture 2% and salt 1% plus ad libitum chopped green SCT to meet their maintenance requirements. During metabolism trial period, the mean total intake and digestibility of DM in groups 1, 2 and 3 was $8.09{\pm}0.41$, $8.41{\pm}0.49$ and $7.86{\pm}0.16kg/d$ and 60.24, 63.24 and 65.05%, respectively. The intake of CP (p<0.05) and EE (p<0.01) was significantly higher in group 2 and group 1, respectively as compared to remaining 2 groups, which were comparable. Digestibility of CP and EE was significantly (p<0.01) higher in group 3 and that of CP was comparable with group 2. The intake and digestibility of total carbohydrates, NDF, ADF, Hemi-cellulose and cellulose were similar among 3 groups. The mean body weight changes in group 1, 2 and 3 were 173.4, 253.4 and 203.4 g/d, respectively, which was significantly (p<0.05) higher in group 2. The total nitrogen (N) and phosphorus (P) intakes were significantly higher in group 2 and group 1, respectively. The total volatile fatty acids, ammonia-N, trichloro-acetic acid precipitable nitrogen (TCA ppt.-N; p<0.05), total-N concentrations and pH were significantly (p<0.01) higher in group 3, however, pH and TCA ppt.-N was comparable with group 2 and 1, respectively. From the results, it may be deduced that the feeding of chopped green SCT supplemented with a concentrate mixture having both wheat bran (48.5%) and lentil chuni (48.5%) has shown a better performance with respect to intake and digestibility of nutrients and growth as well.

• Korean Journal of Agricultural Science
• /
• v.43 no.1
• /
• pp.1-13
• /
• 2016

Climate changes are shifting the perception of C4 photosynthetic crops due to their superior adaptability to harsh conditions. The tribe Andropogoneae includes some economically important grasses, such as Zea mays, Sorghum bicolor, Miscanthus spp., and Saccharum spp., representing C4 photosynthetic grasses. Although the Andropogoneae grasses diverged fairly recently, their genomic structures are remarkably different from each other. As previously reported, the family Poaceae shares the pan-cereal duplication event occurring ca. 65 MYA. Since this event, Sorghum bicolor has never experienced any additional duplication event. However, some lineage-specific duplication events were reported in Z. mays and Saccharum spp., and, more recently, it was revealed that a shared allotetraploidization event occurred before the divergence between Miscanthus and Saccharum (but after the divergence from S. bicolor), which provided important clues to those two species having large genome sizes with complicated ploidy numbers. The complex genomic structures of sugarcane and Miscanthus (defined as the Saccharum complex along with some other taxa) have had a limiting effect on the use of their molecular information in breeding programs. For the last decade, genomics-associated technologies have become an important tool for molecular crop breeding (genomics-assisted breeding, GAB), but it has not been directly applied to sugarcane and Miscanthus due to their complicated genome structures. As genomics research advances, molecular breeding of those crops can take advantage of technical improvements at a reasonable cost through comparative genomic approaches. Active genomic research of non-model species using closely related model species will facilitate the improvement of those crops in the future.

• Journal of Animal Environmental Science
• /
• v.6 no.3
• /
• pp.201-209
• /
• 2000

Optimal conditions to utilize egg type male chicks from hatchery for cultivating yeast(Saccharomyces cerevisiae) and the effects of the yeast culture on growth of broiler chicks were investigated. The protein concentration of the spent cockerel extracts was the highest when extracted for 72 hours. Optimal water volume added to the spent cockerel chicks for the extraction was 1.5 times to the cockerel chicks weight (v/w ratio). Lipid in the extracts from the spent cockerel chicks did not affect on the yeast growth. The number of yeast cultured in the SCELP2 medium containing spent cockerel extracts and 4 % sugarcane molasses was higher by 26 % than that in the YEPD medium containing 1 % yeast extract, 2 % bacto pepton and 2 % glucose. Also the number of yeast cultured in the SBYW2 medium containing SCEP2 medium containing SCELP2 and 4 % brewer's yeast waste was increased by 8 %, compared to that in the SCELP2 medium. Body weight gain of chicks fed 4 % yeast culture supplementations cultivated in the SBYW2 medium was increased at 5 weeks by 9 %, relative to no supplementation(P<0.05). The results from this study suggest that the spent cockerel chicks can be utilized as nitrogen sources to produce yeast culture for animal feed.