• Journal of Bio-Environment Control
• /
• v.18 no.4
• /
• pp.401-407
• /
• 2009

This study intends to examine the influence of foliage treatment and seed treatment on the suppression of the succulent growth of tomato seedlings, and further, to clarify the proper way of suppressing the succulent growth of tomatoes. For the foliage treatment, the time and the concentration of diniconazol treatment were considered, and for the seed treatment, the soaking time was considered. As a result of examining the stem elongation of tomatoes based on the time and the concentration of diniconazol treatment, suppression of stem elongation and internodal length was found in step 1, 2, and 3. Plants absorb more quantity of a chemical when they are young, so a good chemical effect was found. In step 1, the number of suppressed nodes was 4, which was decreased to 3 in step 2 and to 2 in step 3. As a result of examining the influence of chemical tenacity on stem elongation, $5\;mg{\cdot}L^{-1}$ in step 1 and 2 showed the suppression of stem elongation after chemical treatment, but it became recovered fast after a particular time, compared with others. In step 3, the period of stem elongation suppression was short and they were recovered fast. In step 1, the effect of chemical tenacity was found for 5 weeks, but in step 2 and 3, it lasted for 4 weeks respectively. After raising seedlings was finished, they got planted and the quantity of living bodies increased fast so there was no significant difference in breeding from non-treatment.

• The Plant Pathology Journal
• /
• v.31 no.3
• /
• pp.310-315
• /
• 2015

Certain bacterial species associate with plant roots in soil. The plant growth-promoting rhizobacteria (PGPR) stimulate plant growth and yield in greenhouse and field. Here, we examined whether application of known bacilli PGPR strains stimulated growth and asexual reproduction in the succulent plant Kalanchoe daigremontiana. Four PGPR strains B. amyloliquefaciens IN937a, B. cereus BS107, B. pumilus INR7, and B. subtilis GB03 were applied to young plantlets by soil-drenching, and plant growth and development was monitored for three months. Aerial growth was significantly stimulated in PGPR-inoculated plants, which was observed as increases in plant height, shoot weight, and stem width. The stimulated growth influenced plant development by increasing the total number of leaves per plant. Treatment with bacilli also increased the total root biomass compared with that of control plants, and led to a 2-fold increase in asexual reproduction and plantlet formation on the leaf. Collectively, our results firstly demonstrate that Bacillus spp. promote vegetative development of K. daigremontiana, and the enhanced growth stimulates asexual reproduction and plantlet formation.

• Journal of Bio-Environment Control
• /
• v.1 no.2
• /
• pp.135-141
• /
• 1992

Effects of various artificial light sources on the growth of Chinese white cabbage, Chinese flat cabbage, lettuce, garland chrysanthemum, and green perilla were investigated. Plants were grown under different treatments for three weeks. Generally, the growth of artificial light treatment were better than natural daylight(ND). The greatest growth and external quality occurred in high-pressure sodium lamp(HPS). In incandescent lamp(IL), fresh weight was heavy, but marketable quality was poor because of succulent(or spindly) growth. Overall, vitamin C content were no difference among treatments. But relative chlorophyll content was somewhat high in HPS.

• Journal of the Korean Society of Tobacco Science
• /
• v.19 no.2
• /
• pp.102-106
• /
• 1997

The inluence of styrofoam-panel thickness of floating frame on the seedling growth of flue-cured tobacco(Nicotiana tabacum L.) in the newly developed direct-seed float system was investigated . Floating frame used instead of styrofoam-tray consisted of styrofoam-panel (106×108cm) for floating, eight holes(1.Sx2S.0 cm) to uniform the water, and nutrition supply far seedling and water and nutrition absorption cloth placed on the styrofoam-panel. Each floating-frame may lay eight plastic-trays on it. Eight grades of styrofoam-panel thickness from 26 mm to 46mm and two kinds of media were used in the greenhouse system. Dry cells were found from the styrofoam-panel thickness of 43mm in carbonized chaff, compost and original soil rate of L3-3(v/v) media, and of 37mm in peat and perlite rate of 8-2(v/v) media. The thinner styrofoam-panel produced more tender and succulent seedling with the more trunk and the less root weight. When considering the appearance of dry cell, seedling growth, producing healthy tobacco seedlings, and utilization of styrofoam-panel for two kinds of medias the ideal styrofoam-panel thickness were suggested to be around 34mm for flue-cured tobacco reeling production in the newly developed direct-seeding float system. Key words : tobacco seedlings, float system, medium, styrofoam pannel, dry cell.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.45 no.2
• /
• pp.93-96
• /
• 2000

The present study was performed to obtain the basic information about growth and quality related characteristics and optimum harvesting time for podedible pea which is a new crop in Korea but believed to have a great deal of potentials for both domestic and overseas markets. They can be consumed either as a fresh succulent vegetable or as tender green pods. The daily green pod yield of pod-edible peas started to increase from ten days after flowering and the maximum yield was recorded on 26 days after flowering. Ninety percent of pod yields could be harvested from 16 to 36 days after flowering. Mean green pod yield for the tested varieties was approximately 8.0 t/ha. Total vitamin C content of pod-edible peas showed continuously decreasing trends from five days after flowering. The highest sucrose content was obtained at ten days after flowering. The highest panel score based on sweetness, chewiness, and hardness for the processed green pods was shown at 10-15 days after flowering in all varieties tested, indicating that the optimum harvesting time for pod-edible peas was considered to be 10-15 days after flowering.

• Journal of Bio-Environment Control
• /
• v.27 no.4
• /
• pp.363-370
• /
• 2018

The succulent plants of Echeveria genus are in increasing demand worldwide, but it is difficult to supply good quality young plants throughout the year because propagation efficiencies are depend on cultivar and environmental factors. This study was carried out to investigate the propagation efficiencies of leaf cutting in Echeveria cultivars at different LED light qualities in a closed-type plant factory system. Leaf cuttings cut from stock plants of six difficult-to-propagated cultivars 'Afterglow (AG)', 'Berkeley Light (BL)', 'Mason (MS)', 'Subsessilis Light (SL)', 'Cream Tea (CT)', and 'Ben Badis (BB)' were put into cutting media in the plant factory system maintained at a temperature of $24{\pm}2^{\circ}C$ and relative humidity of $60{\pm}10%$, and watered with over-head irrigation twice a week. Cuttings were irradiated with sole or mixed red (R, 660 nm), blue (B, 450 nm), green (G, 530 nm), and far-red (FR, 730 nm) LEDs as follows: R10, R8+B2, R5+B5, R7+B2+FR1, and R7+B2+G1. PPFD just above the cuttings was $200{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$ and photoperiod was 16/8 (light/dark) hours. As a result, propagation efficiencies were dependent on cultivar. Rooting and shooting were relatively easy in 'SL' but shoot formation in 'AG' was very difficult. Light qualities from LEDs also affected plant regeneration. Light conditions with a higher ratio of B, R5+B5, R7+B2+FR1, and R7+B2+G1, promoted shoot formation and growth but inhibited rooting and root growth. R10 and R8+B2 with a higher ratio of R promoted rooting and root growth and inhibited shoot formation and growth of cuttings. In addition, the treatment with FR increased leaf size and biomass of the all plants. Therefore, further studies are needed to investigate the optimum compositions of LED light quality for the improvement of leaf cutting efficiency in difficultto-propagated Echeveria cultivars.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.53 no.2
• /
• pp.196-202
• /
• 2008

To establish a cultivation system of Sedum sarmentosum using a rice nursery tray ($30{\times}60{\times}3\;cm$) in non-heating plastic film house, cuttings of two local strains (Wanju and Keumsan) were prepared and planted at different planting densities (40, 60 and 80 cuttings per tray) on September 7th, and subsequent growth and yield at pre- and post-winter season were investigated. When pre-wintering growth were measured at 60 days after planting, high planting density (80 cuttings/tray) decreased leaf length and lateral shoot number per plant compared to 40 cuttings/tray. When post-wintering growth were measured on April 20th, no significant growth differences as affected by planting density were observed in Keumsan strain, while decreased stem diameter, node number and leaf number were observed in Wanju strain planted at 80 cuttings/tray compared to 40 cuttings/tray. Fresh and dry weights were not significantly different as affected by planting density, but those were significantly increased in Wanju strain compared to Keumsan strain. When regrowth characteristics followed by the first harvest were measured on June 5th, significantly increased stem number was observed at 80 cuttings/tray compared to 40 cuttings/ tray. Fresh and dry weight were significantly increased in Keumsan strain planted at 80 cuttings/tray compared to 40 cuttings/tray, and dry weight were increased in Wanju strain compared to Keumsan strain. Wanju strain showed higher shoot yield, thicker stem, shorter node and larger leaf, and non-succulent stem under high planting density compared to Keumsan strain. Accordingly, the optimum density was 40 cuttings per tray, and Wanju strain was adequate for the cultivation system using a rice nursery tray.

• Journal of Bio-Environment Control
• /
• v.31 no.2
• /
• pp.104-113
• /
• 2022

Plants under the genus Orostachys have been known as medicinal plants. This study deems to determine the growth and leaf color of Orostachys japonica and O. boehmeri when subjected to various LED light sources. A total of seven LED light treatments were used, i.e. red (630 nm), green (520 nm), blue (450 nm), purple (650 and 450 nm), 3000 K white (455, 600 nm), 4100 K white (455, 590 nm), and 6500 K white (450, 545 nm) LEDs. Results showed that O. japonica plants showed favorable growth under 4100 K white LED, while O. boehmeri plants had a positive growth response under white light LEDs (3000, 4100, and 6500 K). In leaf color analysis, the use of green LED showed the greatest change in CIELAB L^* and b^* values which were relatively higher compared to other treatments indicating that leaves turned yellowish. Further statistical analysis using Pearson's correlation also suggested that there is a small negative association between dry weight and b^* values of O. japonica, and a negative moderate association between plant weights (fresh and dry weight) and leaf color (L^* and b^*) and positive association between said plant weights and a^* color values of O. boehmeri. Therefore, it is recommended to cultivate O. japonica under 4100 K white LED and O. boehmeri under 3000, 4100, 6500 K white LEDs.

• Journal of Bio-Environment Control
• /
• v.20 no.4
• /
• pp.357-364
• /
• 2011

Proper light intensity, potting media, fertilization level, and shade tolerance were investigated to develop Orostachys (Korean name, Nungyu bawisol) as a potted ornamental plant. The best plant growth was shown at 52% shading. Although plant growth decreased at 82% shading, ornamental value maintained at that shading rate, which indicate that O. 'Nungyu bawisol' has high shading tolerance. At over 90% shading, some of the plants died and showed decolorization and standing erect in leaves, resulting in a big decrease in ornamental value. Potting medium of decomposed granite (DG) : fertilizer-amended media (FAM) : river sand (RS) (6 : 2 : 2, v/v/v) showed the best growth in potted O. 'Nungyu bawisol'. Fresh weight of shoot part was 16 g in DG : FAM : RS (6 : 2 : 2, v/v/v), which was over 2 folds of those at the other medium. Drenching of Hyponex solution diluted by 1,000~2,000 folds 1 time per week brought the highest results in fresh weight, plant width, and runner number. Particularly, fresh weight of shoot part was 13 g higher than that of control (16 g). Leaf color tended to be darkened as concentration of Hyponex solution increased.

• Korean Journal of Medicinal Crop Science
• /
• v.25 no.2
• /
• pp.95-101
• /
• 2017

Background: Callus cultivation has the advantage of producing a large amount of tissue of a plant in a laboratory regardless of the environment, for extracting an active substance. In the present study, callus formation was induced in the leaves of the succulent plant Adenium obesum (Forssk.) Roem & Schult. After callus cultivation, anti-inflammatory activity tests were conducted, because leaves and stems of A. obesum have been reported to possess biological activity. Methods and Results: In order to induce callus formation, various concentrations of plant growth factors, such as kinetin, naphtha-leneacetic acid (NAA), 6-benzyladenine (BA), and indole-3-acetic acid (IAA) were added to MS solid medium. The maximum callus proliferation was induced by mixed medium consisting of NAA ($2mg/{\ell}$) and BA ($1mg/{\ell}$). In addition, an elicitor was added to the medium under optimal conditions for initiating suspension culture. After suspension culturing, the activities of the callus extracts were compared and analyzed. The cytotoxicity and anti-inflammatory activity tests revealed that the anti-inflammatory activity of the callus extract and the content of phenolic compounds were elevated after treatment of the callus culture with the elicitior. Conclusions: A. obesum callus might be considered as potential source of biologically active anti-inflammatory material.