• Journal of the Korean Association of Geographic Information Studies
• /
• v.15 no.3
• /
• pp.103-118
• /
• 2012

A distributed model can easily obtain discharge at any grids spatially distributed in a watershed. But if there are subwatersheds which have various characteristics in a watershed, it is needed to apply a model calibrated at each subwatershed to obtain reliable simulation results for each subwatershed. In this study, a multi-site calibration module that can calibrate a distributed model at each subwatershed using observed flow data was developed. Methods to select multi-site calibration parameters, to apply subwatershed parameters, and to set subwatershed network information are suggested. Classes to implement multi-site calibration technique are designed and a GUI was developed, and procedures for runoff modelling using subwatershed parameters were established. Multi-site calibration module was applied to Sunsan watershed($977km^2$) of Nakdong river basin. Application results showed that the multi-site calibration technique could be applied effectively to model the calibration for each subwatershed, and the simulation results of subwatershed were improved by the application of multi-site calibration.

• KCID journal
• /
• v.13 no.2
• /
• pp.262-273
• /
• 2006

The Soil and Water Assessment Tool (SWAT) model has been widely used in hydrology and sediment simulation worldwide. In most cases, the SWAT model is first calibrated with adjustments in model parameters, and then the validation is performed. However, very little study regarding the effects on SWAT estimation of subwatershed delineation was performed. Thus, the SWAT model was applied to the Doam-dam watershed with various threshold values in subwatershed delineation in this study to examine the effects on the number of subwatershed delineated on SWAT estimation. It was found the flow effect of subwatershed delineation is negligible. However there were huge variations in SWAT estimated sediment, T-N, and T-P values with the use of various threshold value in watershed delineation. Sometimes these variations due to watershed delineation are beyond the effects of parameter adjustment in model calibration and validation. The SWAT is a semi-distributed modeling system, thus, the subwatershed characteristics are assumed to be the same for all Hydrologic Response Unit (HRU) within that subwatershed. This assumption leads to variations in the SWAT estimated sediment and nutrient output values. Therefore, it is strongly recommended the SWAT users need to use the HUR specific slope length and slope value in model runs, instead of using the slope and the corresponding slope length of the subawatershed to exclude the effects of the number of subwatershed delineated on the SWAT estimation.

• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 2001.10a
• /
• pp.475-478
• /
• 2001

Runoff and nutrient concentrations were monitored to identify pollutant load characteristics of a subwatershed in the Jooam lake. Observed concentrations of T-N and T-P were $1.445{\sim}3.980mg/{\ell}\;and\;0{\sim}0.273mg/{\ell}$, respectively. Runoff load of T-N, T-P by single storm occurred June 24th 2001 contributed 55% of T-N and 41% T-P of total pollutant load during study period.

• Economic and Environmental Geology
• /
• v.46 no.6
• /
• pp.545-559
• /
• 2013

Until now, research achievements of groundwater such as groundwater to depth distribution, usage, the available amount of development, water quality have been written in the watershed units($25{\sim}250km^2$). However, complex topography and geology, and the rivers of our country does not fit. And a clear management standards have not been able to present measures in groundwater quantity, water quality management such as rainfall, groundwater, utilization, water quality, pollution, etc. Therefore, in this study, the classification criterion of subwatershed unit($2.5{\sim}25km^2$), which is suitable for topography and geology of Korea, for rainfall-rating, groundwater level-rating, groundwater pollution-rating, groundwater quality-rating presented and proved its efficiency by applying in Hampyeong-Gun area.

• Korean Journal of Environmental Agriculture
• /
• v.31 no.4
• /
• pp.328-343
• /
• 2012

BACKGROUND: For effective subwatershed management, it is very important to select the tributaries for improving water quality and understand the characteristics of tributaries. Until now, however, the case study of main streams has been managed. 17 tributaries in Geum river subwatershed were monitored to regulate the source of water contaminations and identify their current situations in this study. METHODS AND RESULTS: As pollution indicators, such as biological oxygen demand($BOD_5$), chemical oxygen demand($COD_{Mn}$), suspended solid(SS), total nitrogen (T-N), total phosphate(T-P) and total organic carbon(TOC) in Geum river were examined from January to December in 2011. The results were as follows : The annual average concentration of nutrients in Yongdam reservoir upsteam was 0.7 mg/L for BOD, 3.0 mg/L for COD, 8.4 mg/L for SS, 2.905 mg/L for T-N, 0.035 mg/L for T-P and 1.6 mg/L for TOC. Water quality of Daechung reservoir upstream was mostly similar tendency in comparison to Yongdam reservoir upstream. Among the 22 tributaries, water quality in Daechung reservoir downstream was more polluted. T-N contents were significantly high in Miho B4 located Daechung reservoir downstream(annual average concentration: 13.53 mg/L). In cases of Miho A1, A2 and C1, pollution degree was worsened during rainy season expecially. CONCLUSION(S): For improving water quality of Geum river subwatershed, the tributaries in the Mihocheon area should be preferentially considered. Mihocheon tributary is the highest in pollution site, and thus a study on long-term effects should be research.

• Journal of Wetlands Research
• /
• v.13 no.3
• /
• pp.443-453
• /
• 2011

This research aims at suggesting the mitigation measures of decreasing pollution by analyzing land cover characteristics according to subwatershed, and non-pollutant load characteristics occurring in each subwatershed. Mushim-cheon is selected as a research area, and HyGIS-SWAT is used as a water quality model. This research analyzed outflow load characteristics by classifying land cover, which has over 50% classified items, into a city area, a farmland area and a forest area. The result shows that the yearly occurrence load quantity represents a farmland area, a forest area and a city area in order. In subwatershed-2, occurrence load quantity is analyzed by setting up a buffer zone in the center of stream, and by changing a farmland area into a natural grass land. Therefore, a farmland area in a subwatershed changes 36.6% into 27.9% and 15.3% comparing to previous land cover change. In the analysis of sediment loads occurrence quantity and nutritive salt load occurrence quantity in subwatershed-2, sediment loads occurrence quantity decreases 52% to about 47%, and nutritive salt load decreases 49% and 34% in compare with previous change. Hereafter, this research will set up the mitigation measures scenario, and find out which is more effective for the mitigation measures.

• Journal of Korean Society on Water Environment
• /
• v.25 no.3
• /
• pp.351-362
• /
• 2009

The Soil and Water Assessment Tool (SWAT) model, semi-distributed model, first divides the watershed into multiple subwatersheds, and then extracts the basic computation element, called the Hydrologic Response Unit (HRU). In the process of HRU generation, the spatial information of land use and soil maps within each subwatershed is lost. The SWAT model estimates the HRU topographic data based on the average slope of each subwatershed, and then use this topographic datum for all HRUs within the subwatershed. To improve the SWAT capabilities for various watershed scenarios, the Spatially Distributed-HRU (SD-HRU) pre-processor module was developed in this study to simulate site-specific topographic data. The SD-HRU was applied to the Hae-an watershed, where field slope lengths and slopes are measured for all agricultural fields. The analysis revealed that the SD-HRU pre-processor module needs to be applied in SWAT sediment simulation for accurate analysis of soil erosion and sediment behaviors. If the SD-HRU pre-processor module is not applied in SWAT runs, the other SWAT factors may be over or under estimated, resulting in errors in physical and empirical computation modules although the SWAT estimated flow and sediment values match the measured data reasonably well.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.61 no.1
• /
• pp.9-20
• /
• 2019

The primary objective of this study was to analyze the delivery ratio using Hydrological Simulation Program - Fortran (HSPF) in Okdong-cheon watershed. Model parameters related to hydrology and water quality were calibrated and validated by comparing model predictions with the 8-day interval filed data collected for ten years from the Korea Ministry of Environment. The results indicated that hydrology and water quality parameters appeared to be reasonably comparable to the field data. The pollutant delivery loads of the watershed in 2015 were simulated using the HSPF model. The delivery ratios of each subwatershed were also estimated by the simple ratio calculation of pollutant discharge load and pollutant delivery load. Coefficients of the regression equation between the delivery ratio and specific discharge were also computed using the delivery ratio. Based on the results, multiple regression analysis was performed using the discharge and the physical characteristics of the subwatershed such as the area. The equation of delivery ratio derived in this study is only for the Okdong-cheon watershed, so the larger studies are needed to apply the findings to other watersheds.

• Journal of Korean Society on Water Environment
• /
• v.24 no.2
• /
• pp.147-155
• /
• 2008

Because of increased nonpoint source runoff potential at highland agricultural fields of Kangwon province, effective agricultural management practices are required to reduce the inflow of sediment and other nonpoint source pollutants into the water bodies. The watershed-scale model, Soil and Water Assessment Tool (SWAT), model has been used worldwide for developing effective watershed management. However, the SWAT model simulated sediment values are significantly affected by the number of subwatershed delineated. This result indicates that the SWAT estimated watershed characteristics from the watershed delineation process affects the soil erosion and sediment behaviors. However, most SWAT users do not spend time and efforts to analyze variations in sediment estimation due to watershed delineation with various threshold value although topography falsification affecting soil erosion process can be caused with watershed delineation processes. The SWAT model estimates the field slope length of Hydrologic Response Unit (HRU) based on average slope of subwatershed within the watershed. Thus the SWAT ArcView GIS Patch, developed by using the regression relationship between average watershed slope and field slope length, was utilized in this study to compare the simulated sediment from various watershed delineation scenarios. Four watershed delineation scenarios were made with various threshold values (700 ha, 300 ha, 100 ha, and 75 ha) and the SWAT estimated flow and sediment values were compared with and without applying the SWAT ArcView GIS Patch. With the SWAT ArcView GIS Patch applied, the simulated flow values are almost same irrespective of the number of subwatershed delineated while the simulated flow values changes to some extent without the SWAT ArcView GIS Patch applied. However when the SWAT ArcView GIS Patch applied, the simulated sediment values vary 9.7% to 29.8% with four watershed delineation scenarios, while the simulated sediment values vary 0.5% to 126.6% without SWAT ArcView GIS applied. As shown, the SWAT estimated flow and sediment values are not affected by the number of watershed delineation significant compared with the estimated flow and sediment value without applying the SWAT ArcView GIS Patch.

• Journal of Korea Water Resources Association
• /
• v.36 no.4
• /
• pp.647-659
• /
• 2003

The purpose of this study is to evaluate hydrological applicability of spatially observed rainfall distribution data by the TRMM/PR (Tropical Rainfall Measuring Mission / Precipitation Radar). For this study, firstly, TRMM/PR data (Y) of the Yongdam-Dam Watershed (930.38$km^2$) was extracted and secondly, TRMM/PR data and the rainfall data (X) by AWS (Automatic Weather Station) were compared by executing a correlation analysis. As a result, the regression equations were deduced as two parts (under 60mm/day : Y = 18.55X-0.53, over 60mm/day : Y = 3.11X+51.16). SCS runoff analysis was conducted using 7 rainfall events in 1999 for Yongdam-Dam watershed and the Cheon-Cheon subwatershed for the revised TRMM/PR data. TRMM/PR data showed relative errors ranging from 19.6％ ti 45.6％, and from 11.3％ to 38.9％ for Cheon-Cheon subwatershed and Yongdam-Dam watershed, respectively, AWS data showed relative errors ranging from 0.5％ to 12.8％, and from -1.6％ to -10.3％, for Cheon-Cheon subwatershed and Yongdam-Dam watershed, respectively. Futher researches are necessary to evaluate the relationship between TRMM/PR data and AWS data for practical hydrological applications.