• Korean Institute of Interior Design Journal
• /
• v.19 no.4
• /
• pp.39-47
• /
• 2010

As various materials and new methods can be used due to developments in science and expansion of thinking, modern architectural color composes extensive possibilities exceeding its physical role of the past. In particular, rather than the initial external expression, the secondary connotative interpretation is more important in interpreting architectural color. This is because color interpretation changes the meaning of space based on light. Also, the development of digital technology has shifted the use of architectural color from passive realization to a more proactive concept and value. In other words, such shift leads to a new discussion on architectural color such as non-representation, invisibility, and non-physicality as the concept of fixed time, space and movement has been weakened. This paper begins by conceptualizing the digital space, a term widely used to interpret the architectural color of digital space. And it will be categorized as non-representational architectural color, invisible architectural color, and non-physical architectural color, by combining the characteristics of digital space with the modern architecture's color examples. Digital space overcoming the space time is differently interpreted from the past color expression. Modern architecture's color which substitutes the passive view with active body takes a role delivering various axes of discussions with synaesthesia.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2001.11a
• /
• pp.853-858
• /
• 2001

The PSC bridge being built by ILM may have greater bending moment during its construction rather than after completion. When it occurs, Engineer should suggest to reduce stress-resultants than to make bigger cross-section with considering stability ,economics, and proper span-to-depth ratio. The used method is to install extruded nose at the end of girder. It substitutes the weighted segment for the light. From the reference, the stiffness of extruded nose, is 1/10 of the main girder, and the length is 60 to 70% of the length of the span, with little justification. In this study, the proper length and stiffness of the nose element is determined by the parametric study and idealizing procedure. The results about the extruded nose through the mixing of the parameter of its stiffness and length, the proper length of extruded nose is 80% of the longest span and the proper stiffenss is 13% of the bending stiffness of the superstructure and the proper length of extruded nose is 70% of the longest span and the proper stiffness is 9.5% of the bending stiffness of the superstructure.

• The Korean Journal of Ceramics
• /
• v.7 no.1
• /
• pp.16-19
• /
• 2001

For the fast dry of the aqueous tape, the process which water was reaplaced by organic solvent was proposed. Socalled, it was the solvent washing dry. Three organic solvents (methanol, ethanol and acetone) were selected for the washing solvent. The weight loss of the washed tapes was measured to evaluate the dry rate of the tapes and dried tapes were examined the generation of the cracks with the variations of the organic solvent and the washing time. Methanol, ethanol and acetone were available organic solvents for this method. The tapes washed in methanol, ethanol and acetone were dried rapidly for twenty minutes. After thirty minutes, the weight losses were not found any more, The solvent of the lower surface tension can decreases the crack of dried tape. If solvent substitutes water completely, though it was fast dried, crack can be eliminated.

• Transactions on Electrical and Electronic Materials
• /
• v.17 no.5
• /
• pp.239-251
• /
• 2016

The potential of nanocomposites have been drawing the intention of the researchers from energy storage to electrical insulation applications. Nanocomposites are known to improve dielectric properties, such as the increase in dielectric breakdown strength, suppressing the partial discharge (PD) as well as space charge, and prolonging the treeing, etc. In this review, different theories have been established to explain the reactions at the interaction zone of polymer matrix and nanofiller; the characterization methods of nanocomposites are also presented. Furthermore, the remarkable findings in the fields of epoxy, cross-linked polyethylene (XLPE), polypropylene and polyvinyl chloride (PVC) nanocomposites are reviewed. In this study, it was observed that there is lack of comparison between results of lab scale specimens and actual field aged cables. Also, non-standardization of the preparation methods and processing parameters lead to changes in the polymer structure and its surface degradation. However, on the positive side, recent attempt of 250 kV XLPE nanocomposite HVDC cables in service may deliver a promising performance in the coming years. Moreover, materials such as self-healing polymer nanocomposites may emerge as substitutes to traditional insulations.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.66 no.4
• /
• pp.236-241
• /
• 2017

This paper presents a single-phase grid connected voltage-ed inverter with a power decoupling circuit. In the single-phase grid connected voltage-ed inverter, it is well known that a power pulsation with twice the grid frequency is contained in the input power. In a conventional voltage type inverter, electrolytic capacitors with large capacitance have been used in order to smooth the DC voltage. However, lifetime of those capacitors is shortened by the power pulsation with twice grid frequency. The authors have been studied a active power decoupling(APD) method that reduce the pulsating power on the input DC bus line, this enables to transfer the ripple energy appeared on the input DC capacitors into the energy in a small film capacitor on the additional circuit. Hence, extension of the lifetime of the inverter can be expected because the small film capacitor substitutes for the large electrolytic capacitors. Finally, simulation and experimental results are discussed.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2005.10a
• /
• pp.5-21
• /
• 2005

Urbanization rates of population range from about 1% in the developed countries to about 4% in developing countries. For a global population that may reach 10 billion within the next 40 years, pressure has arisen for an increase in the large-scale use of wastes and byproducts in construction. Ironically, most of the wastes that need to be recycled are generated in large cities where the need for constructed facilities to serve large population is high. Waste and recycled materials (WRM) that are used in construction are required to satisfy material strength, durability and contaminant teachability requirements. These materials exhibit a wide variety of characteristics owing to the diversity of industrial processes through which they are produced. Several laboratory-based investigations have been conducted to assess the pollution potential and load bearing capacity of materials such as petroleum-contaminated soils, coal combustion ash, flue-gas desulphurization gypsum and foundry sand. For full-scale systems, although environmental pollution potential and structural integrity of constructed facilities that incorporate WRM are interrelated, comprehensive schemes have not been developed for integrated assessment of the relevant field-scale performance factors. In this presentation, a framework for such an assessment is proposed and presented in the form of a flowchart. The proposed scheme enables economic, environmental, worker safety and engineering factors to be addressed in a number of sequential steps. Quantitative methods and test protocols that have been developed can be incorporated into the proposed scheme for assessing the feasibility of using WRM as partial or full substitutes for earthen highway materials in the field.

• Korean Management Science Review
• /
• v.25 no.1
• /
• pp.123-138
• /
• 2008

Recently, DMB service markets experience a rapid change with terrestrial DMB test-broadcasting for the nation-wide coverage and paid interactive data broadcasting being offered utilizing TPEG and BIFS technologies. This warrants a reexamination of a consumers' adoption intentions for DMB service. This paper uses a survey data set to analyze DMB adoption intentions and the choice between terrestrial DMB and satellite DMB services according to preferred contents and other media usage characteristics. Empirical results show that consumer who prefer TV, music, and movie contents are more likely to adopt DMB service, whereas consumers with high intentions for HSDPA subscription are less likely to adopt DMB service. This implies that continuing development of killer application and the analysis of substitutes or complements of other media are crucial for the increase of DMB adoption intentions. It is found that the more consumers prefer sports, movies and entertainment/game and put higher values in the quality of the contents, the more likely they adopt satellite DMB service. Meanwhile, the more consumers prefer TV, drama and news contents, and are sensitive to the subscription fees, they are more likely to adopt terrestrial DMB service. Therefore, it seem that consumers' DMB adoption between terrestrial and satellite services is crucially related with types and characteristics of contents offered.

• Journal of Broadcast Engineering
• /
• v.6 no.1
• /
• pp.21-31
• /
• 2001

In the PN-sequence based audio watermarking system, the PN sequence is shaped by a filter derived from the psychoacoustic model to increase robustness and inaudibility The psychoacoustic model calculated in each audio segment, however, requires heavy computational loads. In this paper, we propose an efficient watermarking system adopting a fixed-shape perceptual filter that substitutes psychoacoustic model derived filter. The proposed filter can shape the PN-sequence to be inaudible and enable to embed the robust watermark in a simple manner. Moreover, we propose an anchitecture for the PN-sequence compensation fitter In the watermark detecter to increase correlation between the watermark and the PN-sequence. With the proposed architecture, the blind watermark detection performance has been enhanced.

• CELLMED
• /
• v.4 no.3
• /
• pp.19.1-19.6
• /
• 2014

The most important reason mentioned for the early discontinuation of breast feeding and introduction of supplementary bottles is Perceived Insufficient Milk (PIM), which is relatively common in women. This is of public health concern because the use of breast milk substitutes increases the risk of morbidity and mortality among infants in developing countries and shortens birth intervals. Thus, a literary search in classical text for aetiopathogenesis, symptoms and treatment of PIM were appraised to implement in contemporary era. The classical Unani texts viz., Al Qanon fit Tib (Canon of Medicine), Al Hawi (Continens Liber), Zakheera Kharzam Shahi, Tarjuma Kamilus Sana, Tibbe Akbar, Akseer Azam, and Kitabul Kulliyat were reviewed. Further certain galactogogue herbs which are in use since antiquity such as fenugreek, cotton seeds, cumin, asparagus, black cumin etc were explored in different search engines on website for proven galactogogue activity. The causes of PIM are abnormal temperament of body or breast, anaemia, anxiety, depression, malnutrition etc. The principle treatment is treating the cause viz., the temperament is corrected by diet and drugs in abnormal temperament, elimination of humour is required in dominance of humour etc. The aforementioned drugs are proven scientifically for their galactogogue activity. The classical texts are having valuable information regarding PIM, which can be implemented in present era. Aforementioned Unani drugs are proven scientifically for with their galactogogue effect, however, clinical trials are scarce. Therefore, further randomized controlled clinical trials are recommended.

• Journal of Powder Materials
• /
• v.23 no.3
• /
• pp.228-234
• /
• 2016

Copper nanoparticles attract much attention as substitutes of noble metals such as silver and can help reduce the manufacturing cost of electronic products due to their lower cost and good conductivity. In the present work, the chemical reduction is examined to optimize the synthesis of nano-sized copper particles from copper sulfate. Sodium borohydride and ascorbic acid are used as reducing and antioxidant agents, respectively. Polyethylene glycol (PEG) is used as a size-control and capping agent. An appropriate dose of PEG inhibits the abnormal growth of copper nanoparticles, maintaining chemical stability. The addition of ascorbic acid prevents the oxidation of nanoparticles during synthesis and storage. Transmission electron microscopy (TEM) and Fourier transform infrared spectroscopy (FTIR) are used to investigate the size of the synthesized nanoparticles and the coordination between copper nanoparticles and PEG. For chemical reduction, copper nanoparticles less than 100 nm in size without oxidized layers are successfully obtained by the present method.