• 한국세라믹학회지
• /
• 제48권4호
• /
• pp.293-297
• /
• 2011

The thermodynamic behavior of phenolic resin was investigated to verify the relation between the properties of porous ceramics with $ZrO_2$-C system for submerged entry nozzle and the characteristics of phenolic resin with various relative humidity. The green and the sintered density were decreased between 25% and 50% relative humidity, whereas they were gradually enhanced above 50% relative humidity. The highest value of apparent porosity was 20.1% and the minimum compressive strength was 69MPa in the specimen using the powder exposed to 50% relative humidity. As a result of thermal analysis for phenolic resin, the shift of endothermic peak to low temperature and the reduction of exothermic peak were observed, and the peaks corresponded to melting and curing of phenolic resin, respectively. The melting and the curing of phenolic resin generate the change of green density, and it can affect the properties of submerged entry nozzle.

• Journal of Microbiology and Biotechnology
• /
• 제10권4호
• /
• pp.482-487
• /
• 2000

Optimization of submerged culture conditions for the production of exo-biopolymer from Paecilomyces japonica ws studied. Maltose, yeast extract, and potassium phosphate were the most suitable sources of carbon, nitrogen, and inorganic salt, respectively, for both production of the exo-biopolymer and mycelial growth. The optimal culture conditions in a flask culture were pH 5.0, $25^{\circ}C$, and 150 rpm in a medium containing (as in g/l) 30 maltose, 6 yeast extruct, 2 polypeptone, $0.5{\;}K_3HPO_4,{\;}0.2{\;}KH_2PO_4,{\;}0.2{\;}MnSO_4{\cdot}5H_2O,{\;}0.2{\;}MgSO_4{\cdot}7H_2O$. Exo-biopolymer production and mycelial growth in the above suggested medium were significantly increased in a 2.5-1 jar fermentor, where the maximum biopolymer concentration was 8 g/l. The morphological changes of the mycelium in the submerged culture were observed within pH ranges from 4.0 to 9.0; i.e., growth of the filamentous form was optimal at culture pHs of 5.0 and 6.0, whereas pellet was formed at other pHs.

• 한국해양환경ㆍ에너지학회지
• /
• 제5권2호
• /
• pp.19-27
• /
• 2002

본 연구는 입체적 어장 개발을 위해 수산자원 증대의 토대가 되는 해조장의 확대와 생태계의 고밀도·고효율화를 위한 기초적 연구로 수평판형 중층계류식 인공해저시스템의 파랑응답특성에 관한 실험적 연구를 수행하였다. 실험은 2차원 수조에서 다른 두 가지 모형의 수평판을 세 가지 다른 수심에 각각 고정 혹은 계류시켜 실시하였다. 실험에서 모형 고정시의 작용유체력 특성과 모형 계류시의 파랑응답 및 계류력 특성을 살펴보았으며, 또 각 조건에서 모형의 파랑제어특성을 검토하였다.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2002년도 Proceedings of the International Welding/Joining Conference-Korea
• /
• pp.361-365
• /
• 2002

Advancements in silicon phase control (SCR) technologies provide an arc welding power supply that has the capability to allow the alteration of the Alternating Current (AC) welding output. These technologies provide a square wave output involving sixteen frequency selections and multiple balance selections. While an AC out put is known to minimize magnetic disturbances associate with Direct Current (DC), the potentials of a non-sinusoidal waveform have not been explored. The focus of the paper is to determine the effects that the frequency and balance of an AC wave form output will have upon a high speed Submerge Arc (SAW) application. The test matrix of the project includes welding .250" steel plate. Joint type is square groove with a travel speed of 65 IPM. Each of the weld parameters was held constant, only the frequency and/or balance were altered between welds. Each frequency/balance combination involved three-gap spacing. Upon completion of the welds the bead profiles were measured and recorded. A relationships/trends were observed with various frequency and balance values. Optimum frequency and balance values were found for the .250" square groove application which permit consistent weld sizing, ease of slag removal, and minimal plate distortion.

• 한국물환경학회지
• /
• 제25권1호
• /
• pp.120-124
• /
• 2009

This study was performed to investigate the application of submerged membrane bioreactor (MBR) system for biological nutrient removal of municipal wastewater. MBR bioreactor consists of four reactors such as anaerobic, stabilization, anoxic and submerged membrane aerobic reactors with two internal recycles. The hydraulic retention time (HRT), sludge retention time (SRT) and flux were 6.2 hr, 34.1 days and $19.6L/m^2/hr$ (LMH), respectively. As a result of operation, the removal efficiency of $COD_{Cr}$, SS, TN and TP were 94.3%, 99.9%, 69.4%, and 74.6%, respectively. There was no significant effect of microbial activity after the maintenance cleaning using 200 mg/L of NaOCl. Membrane filtration for the treatment of municipal wastewater was performed for longer than 9 months without chemical recovery cleaning.

• 한국수자원학회논문집
• /
• 제36권5호
• /
• pp.741-749
• /
• 2003

본 연구에서는 사다리꼴형상 투과성 수중방파제에 의한 정현파의 Bragg반사에 대해 수리모형실험과 수치모형실험을 수행하였으며, 두 실험결과를 비교하였다. 수치해석에 적용된 모형에서는 공간 평균된 Wavier-Stokes 방정식을 투과체 내에서의 지배방정식으로 사용하였고, 자유수면변위를 추적하기 위해 VOF기법을 적용하였다. 수리실험결과와 수치해석결과는 비교적 잘 일치하였으며, 투과성 수중방파제에 의한 반사계수는 불투과성에 비해 낮게 나타나고, 방파제의 배열이 증가함에 따라 반사계수는 증가함을 보였다.

• 한국융합학회논문지
• /
• 제8권10호
• /
• pp.185-191
• /
• 2017

최근, LNG는 저렴한 가격과 친환경적 연료 등의 이유로 선박용 대체연료로 각광을 받고 있으며, 그 수요량도 급성장이 예상된다. 그러나, 선박의 LNG 연료공급을 위한 극저온펌프(Cryogenic Pump) 제작과 관련한 국내 기술력은 매우 미흡한 실정으로 핵심 부품의 설계와 제작 기술이 절실한 시점이다. 따라서, 본 연구는 선박용 LNG 공급 시스템용 극저온 잠액식 원심펌프(Cryogenic Submerged Centrifugal Pump)의 단계별 개발절차에 대하여 기술하였다. 그리하여, 각 단계별 특성 및 주요 개발항목을 공학적이고 관리적인 측면에서 접근함으로써 실질적이고 구체적인 개발방법을 제시하는데 연구 목적을 두었다.

• 한국항해항만학회지
• /
• 제28권3호
• /
• pp.199-205
• /
• 2004

라디에이션(radiation) 문제를 해결하기 위해서 중합격자법을 개발하였다. 중합격자계는 이동격자계와 고정격자계로 이루어져 있으며, 이동격자계는 운동하는 물체에 적용되어 운동하는 물체와 동시에 이동된다. 이러한 수치계산법은 자유표면 부근에서 운동하는 몰수평판에 작용하는 라디에이션 유체력을 계산하는데 응용되었다. 현재의 수치계산법에 의한 결과는 실험값 및 선형포텐셜 이론에 의한 결과와 상호 비교하였으며, 수치계산의 신뢰성을 확인하였다. 그리고, 몰수평판에 작용하는 비선형 점성감쇄효과에 대하여 평가하였다.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2006년 창립20주년기념 정기학술대회 및 국제워크샵
• /
• pp.457-460
• /
• 2006

This study is to investigate the variation characteristics of run-up height over sandy beach due to the plane distribution of submerged breakwaters. In this study, Three-Dimensional numerical model with Large Eddy Simulation, which is able to simulate directly WAve Structure Seabed interaction (hereafter, LES-WASS-3D) has been newly developed. A comparison between the numerical model and existing experimental results was made to verify accuracy of newly proposed LES-WASS-3D model, and showed fairly nice agreement. In addition, based on the LES-WASS-3D model, the variation characteristics of run-up height over sandy beach are discussed with relation to the offshore distance and opening width of submerged breakwaters.

• 한국해양공학회지
• /
• 제23권1호
• /
• pp.7-15
• /
• 2009

The aim of this study was to survey the effects of the beachface gradient on 3-D currents around the open inlets of submerged breakwaters. First, the numerical model was validated by a comparison with existing experimental data. This model is able to consider the flow through a porous medium with inertial, laminar, and turbulent resistance terms, i.e. simulate directly WAve?Structure?Seabed/Sandy beach interaction, and can determine the eddy viscosity with a LES turbulent model in a 3-Dimensional wave field (LES-WASS-3D). Using the numerical results of this model, the 3-D currents around the open inlets of submerged breakwaters were examined in relation to the beachface gradient. Moreover, the wave height distribution and mean flow around them are also discussed, as well as the distribution of the wave breaking points over the crest.