• 한국의류학회지
• /
• 제34권1호
• /
• pp.112-125
• /
• 2010

A Holter monitor is used for ECG monitoring of ambulatory daily life in hospital. However, the use of this apparatus causes skin allergies and discomfort in patients because of the attachment gel and tapes used to attach disposable electrodes to the skin. In this study, the development of tight-fitting clothing connected to a portable Holter monitor was proposed. In addition, the use of conductive fabrics as electrodes was proposed; this will enable the use of garments in u-health care for measuring ECG signals. The male subjects were university students in the ages of 20 to 24. Subjective wear sensations of the experimental garments were rated using seven Likert scales. A Likert type scale was used for the evaluation and a 7 point score indicates that it provided the best fit as a tight-fitting upper clothing. Clothing pressure was measured using an air-pack-type pressure sensor (model AMI 3037-2) at 4 locations (the conductive fabric electrode) As results, a male basic sloper for upper clothing was developed and that pattern was manipulated to the tight fit pattern by considering the reduction rate of the percentage stretch in the fabric. The developed tight-fitting garment was superior in terms of subjective sensation and 6t. The mean pressure of the garment with reduction rates of 40% in width and of 50% in length was 8.45gf/$cm^2$. A conductive fabric electrode was developed by considering the sewing method and the developed electrode was detected well. The ECG data were recorded for 13 hr 19 min 44 sec and the artifacts in the ECG signals were recorded for 9 hr 3 min 46 sec (total time: 22 hr 23 min 23 sec). The artifacts data were obtained during heavy activities.

• 한국의류학회지
• /
• 제19권1호
• /
• pp.36-50
• /
• 1995

The purpose of this study was 1) to estimate the improvement of thermal storage/release and moisture transport properties of PEG-treated acrylic athletic socks and suggest the optimum add-on for PEG treatment, 2) to investigate wear performance of untreated cocks and two kinds of socks treated with PEG of minimum and optimum add-on respectively, and 3) to consider the effect of thermal storage/release and moisture transport properties of PEG- treated socks on the wear performance and the subjective comfort zone. Thermal activities of specimens treated by PDC were evaluated on a DSC by measuring the heat of fusion on heating and the heat of crystallization on cooling. Moisture regain, absorption speed, wickability, water retenti on value, and water-vapor permeability were measured. In the wear trials that the subjects performed a subsequent exercise protocol wearing three differently treated socks in a conditioned environment ($14\pm2^{\circ}C$, 65$\pm$2% R.H.), microclimate temperature and humidity, and subjective wear sensations including thermal sensation, wettedness, softness, fit, and overall comfort were obtained. PEC-treated specimens with more than 20% add-on showed thermal storage on heating and thermal release on cooling by a DSC and the heat contents of treated ones were generally proportional to the add-ons. Moisture transport properties were highly improved after PEG treatment and increased rapidly with increasing add-on. The tendencies were, however, relaxed above 50% add-on and the treated knits were much stiffer above that add-on. In the wear trials of untreated, PEG add-on 20%, and 50% acrylic socks, the changes of microclimate temperature of 50% socks were significantly less than that of 20% socks. PEG add-on 50% socks showed significantly less changes of microclimate humidity than other two kinds of socks. Three kinds of socks showed significant differences in overall comfort and add-on 50% socks were accepted more comfortable than other two kinds of socks. Comfort zone of foot was extended after PEG treatment on socks and it implied that the subjects wearing PEG- treated socks felt comfortable in wider ranges of microclimate temperature and humidity.

• 한국의류학회지
• /
• 제14권1호
• /
• pp.20-30
• /
• 1990

In order to investigate the mechanism of the formation of clothing microclimate with different blouse designs and materials, physiological and subjective sensational changes were measured. Experimental clothing were four types of blouse made of $100\%$ cotton, $100\%$ regular polyes­ter, and $100\%$ hygroscopic polyester. Four types of box style blouse were with stand collar and long sleeve, with stand collar and sleeveless, with long sleeve and collarless, and sleeveless and collarless. Five healthy female were chosen as subjects. Experiments were carried out in the environ­mental chamber controlled at $28{\pm}1^{\circ}C$ , $70{\pm}5\%$ RH. and still-air condition for SO min. The skin temperature (9 spots), oral temperature, humidity inside chest, and subjective sensations were measured. Obtained results are: I) Material which is capable of absorbing sweat effectively and transfering moisture rapidly made a comfortable feeling, because cloth­ing humidity is increasing slowly at this material. 2) During exercise period, covered arms have more influenced on thermal comfort than a covered neck.

• 한국생활과학회지
• /
• 제15권5호
• /
• pp.791-802
• /
• 2006

The construction of athlete's tight-fitting garments by reducing the elastic knit pattern is an interesting subject, which directly influences the performance of the wearer. Therefore, relationships between the reduction rates of the men's pants pattern obtained using measurements of Size Korea 2004 and clothing fitting were explored to improve clothing comfort. Two pattern making methods were developed and the reduction rates were applied to those pants depending on the parts of human body. The four male subjects were university students in the ages of 20 to 24. Subjective wear sensations of the experimental garments were rated using seven Likert scales during 4 consecutive days. While wearing the garments, subjects were kept four various postures including waist flexion and sitting etc by requests of the researchers. Likert type scale was used for the evaluation and 7 point indicates that it gave the best fit as tight-fitting pants. As results, differences in the length and girth between two piece pants pattern(style 1) and one piece pants pattern(style 2) were 0.0$\sim$0.3cm. Between two pattern making methods, one piece pants pattern(the style 2) was superior to two piece pants pattern in terms of subjective sensation and fit. Among eight tight-fitting pants, C, D, G, H pants were superior in terms of fitting and stability of waist and hip part to the others. ill case of tight-fitting pants, the reduction rate of the pattern in the course direction, the reduction rate of T2/3(66%) was better than that of T/2(50%), but the reduction rate of the pattern in the wale direction, that of the part of crotch, which was very sensitive part, should be kept the same as suggested earlier by Ziegert(1988).

• 한국의류학회지
• /
• 제28권8호
• /
• pp.1175-1185
• /
• 2004

This study evaluated thermo-physiological and subjective properties of improved disposable coveralls for railroad carriage maintenance through climatic chamber trials and a filed study. Subjects wore five kinds of disposable coveralls (Type A: a disposable coverall on the market, Type B: a coverall with an improved hood and size-adjustable design, Type C: a coverall with a portable hood, Type D: a coverall with small holes for ventilation, Type E: a sleeveless coverall, Type F: a separated type of coverall with half sleeves) The air temperature in the climatic chamber was set in 9$^{\circ}C$ and 30$^{\circ}C$ For each condition, subjects simulated the railroad work for 120min. and rectal temperature, skin temperatures, clothing microclimate and subjective sensations were measured. The results of chamber trials showed rectal temperature and clothing microclimate did not display significant differences by clothing type. In 30$^{\circ}C$ air temperature, mean skin temperature was higher in Type E and Type F than in Type A(p＜0.05) but between the improved coveralls(B-F), we could not find any significant difference. In the case of thermal comfort, the most preferred types were Type B and Type C in 9$^{\circ}C$ and Type F in 30$^{\circ}C$. All subjects felt more comfortable in the improved coveralls than in coveralls of the market (Type A). In field study, workers preferred Type B, Type C and Type F to Type A but the most favorite type differed by the specific type of work. Especially, workers were dissatisfied that Type D tore easily due to lots of small holes around the armpits and Type I did not protect workers＇ shoulder and arms from oil contamination. According to the climatic chamber trials and field study, the most effective coveralls were Type B and Type C for winter and Type F for summer.

• 한국의류학회지
• /
• 제15권1호
• /
• pp.61-69
• /
• 1991

In order to investigate the comfort properties of aerobic wear with different materials, the physiological responses, subjective wear sensation and microclimate were measured. The experimental garment were all-in·one type with half·length sleeves made of cotton/ polyurethane and nylon/ polyhrethane fabrics. The conditions of the experimental room were controlled to maintain two type of environ- ments, i.e. $25{\pm}1^{\circ}C$, $60{\pm}5\%$ R. H. and $30{\pm}1^{\circ}C$, $70{\pm}5\%$ R.H., Air velocity was maintained at 0.25 misec all the time. The results are as follows; 1) At $25^{\circ}C$, mean skin temperature and comfort sensation were not significantly different among 2 types of materials. 2) At $30^{\circ}C$, aerobic wear made of cotton/polyurethane fibers showed better pleasant tactile sensation than that of nylon/polyurethane fibers. 3) Under both environmental conditions, microclimate of two types of aerobic wear was not significantly different. 4) Among several aspects of wear sensations, tactile sensation was the most powerful factor to differenciate material differences of aerobic wear.

• 한국지역사회생활과학회지
• /
• 제18권1호
• /
• pp.87-95
• /
• 2007

This study was to determine the effect of cooling parts of the limbs without harm to health. The results provide basic data for the development of clothing which could increase work efficiency and reduce body strain in hot environments. Five male adults took part in the study, conducted in a climate chamber with an ambient temperature of $37^{\circ}C$ and a relative humidity of 50%. The limbs were divided into six areas to be cooled: upper arm, forearm, thigh, calf, hand, and foot. According to preceding studies, permissible cooling safety limits of skin temperature for each part of the body for one-hour were $20^{\circ}C$ on the upper arm, forearm, thigh, and calf, and $23^{\circ}C$ on the hand and foot. For this reason, cooling the skin of each region was carried out at the above mentioned temperatures. In conclusion, cooling the hand and foot reduced perspiration, rectal temperature and heart rate. Therefore, the heat stress of workers exposed to hot environments would be reduced by decreased subjective sensations of heat and increased comfort. The effectiveness of cooling was better on the arm than on the leg.

• 한국의류산업학회지
• /
• 제10권5호
• /
• pp.668-675
• /
• 2008

The purpose of this study was to collect data of skin temperature and physiological responses which is useful for standardization of insulation measurement in various garments. And we investigated sex and season difference of physiological responses of 60's males and 60's females in hot and cold environment. Healthy ten 60's males and ten 60's females volunteered as subjects. The experiment was conducted three times; One for winter condition($5^{\circ}C$, 45%), another for summer condition($30^{\circ}C$, 65%) and the other for nude condition as control($30^{\circ}C$, 65%). The subjects were sitting for 1 hour with suitable ensemble on each experimental condition in climate chamber. We measured skin temperature, rectal temperature, heart rate, oxygen uptake, sweat rate, blood flow, blood pressure and subjective sensations. We found that skin temperature and most of physiological responses were higher in male subject, summer condition than in female subject, winter condition.

• 한국의류학회지
• /
• 제24권1호
• /
• pp.77-86
• /
• 2000

Purposes of this study were firstly to refine the measurement technique of tactile sensation and sensibility induced by touching the fabrics and secondly to investigate the differences of tactile sensibility depending on environmental conditions and the type of polyester fabrics. The environmental conditions were controlled at 20$\pm$1$^{\circ}C$, 65$\pm$3%RH(standard) and at 29$\pm$1$^{\circ}C$, 75$\pm$3%RH(warm & humid). As results, three factors were extracted from factor analysis of sensory assessment scale. The first factor was thickness and weight, the second one was surface-related property and the third one was stiffness in both environments. Depending on the environmental conditions, heat and moisture-related sensations such as [cold], [damp] and [dry & drapable] were affected significantly. Regression equations with the sensation descriptors were developed for the prediction of tactile sensibility(R2>.89). While the most efficient descriptor was [thin & flexible] in the standard environmental conditions, that was [dry & drapable] in the warm & humid environmental condition.

• 한국생활과학회지
• /
• 제5권2호
• /
• pp.123-130
• /
• 1996

The purpose of this study is to examine and to evaluate the wearing performance of pile materials to produce velvet fabrics which have excellent wearing comfort. Acetate velvet, Cuprammonium rayon velvet were combined as textiles for clothing and acetate and viscose rayon were as textiles for lining at the environmental condition of temperature $15^{\circ}C,\;18^{\circ}C,\;21^{\circ}C,\;24^{\circ}C$, relative humidity $50{\pm}5%$ and air velocity 0.25 m/sec. Wearing comfort among 4 materials combinations(Aa, Av, Ra, Rv) was examined and compared. The results are as follows. The investigation of mean skin temperature for environmental temperature and material combinations showed that the mean temperature had a significant difference at the p<0.01 level in accordance with environmental temperature and material combinations.(Aa>Av>Ra>Rv) Moreover, in clothing climate only clothing temperature tended to increase almost linearly but at $24^{\circ}C$ there was no significant difference among textiles for lining compared with the other environmental temperatures. In subjective sensations thermal sensation and comfort sensation showed a significant difference in environmental temperatures and materials.(Aa>Av>Ra>Rv) Though a subject felt warmer, more humid, and more uncomfortable at $24^{\circ}C$ for all of the material combinations comparing with the other temperatures, there was no significant difference in materials.