• 한국지반환경공학회 논문집
• /
• 제15권5호
• /
• pp.13-21
• /
• 2014

본 연구에서는 쉴드 TBM 공법의 다양한 세그먼트 모델링 기법에 따른 비교 해석을 통하여 해석기법에 따른 차이를 분석하고 이에 따른 합리적인 모델링 기법을 제안하였다. 또한 암반 이완하중 산정모델에 따른 하중 분석 및 3차원 유한요소해석을 통하여 실제 현장에서 적용 가능한 합리적인 하중산정 방법을 제시하였다. 암반분류에 의한 이완영역의 산정방법은 암반등급이 높은 지반에서는 결과의 차이가 크지 않으나 지반등급이 낮은 지반에서는 그 차이가 매우 크게 나타났으며, 3차원 해석에 의한 이완영역 산정결과 지반등급이 낮은 지반의 이완영역은 각 방법의 중간 정도 범위에 위치할 것으로 예측되었으며 지반등급이 낮은 지반의 세그먼트 계획 시에는 기계식 터널 굴착 특성을 반영한 3차원 해석을 통한 이완영역의 산정을 적극 검토할 필요가 있다.

• 한국지반신소재학회논문집
• /
• 제19권2호
• /
• pp.1-11
• /
• 2020

대구경 현장타설말뚝의 수평지지 특성은 말뚝의 강성, 인접지반의 수평지반반력에 따라 크게 좌우된다. 특히 말뚝설계 시 많이 활용되는 경험적인 수평지반반력계수는 그 결과의 값에 따라서 지지력의 차이가 크므로 수평지지력을 평가하는 데 매우 중요한 요소임에도 불구하고 대구경 현장타설말뚝에 대한 지반반력계수의 평가가 미흡한 실정이다. 또한, 말뚝의 취약부인 수평하중에 대한 영향범위와 최대 모멘트의 발생위치는 서로 상관관계가 있을 수 있고, 수평하중에 대한 말뚝의 보강영역을 판단하는데 주요 고려사항임에도 기존 연구에서는 이 관계에 대해 평가되지 않았다. 이에 본 연구는 대구경 현장타설말뚝의 수평지반반력계수를 평가하고, 말뚝의 영향범위(1/β)와 최대 모멘트의 발생위치(z_m)의 관계를 조사하고자 대구경 현장타설말뚝에 대한 현장시험과 비선형 해석을 수행하였다. 연구결과, 대구경 현장타설말뚝의 수평지지력은 경험식을 통한 산정결과에 따라 최대 190%정도 차이를 보였다. 또한, 말뚝의 수평거동에 대한 영향범위와 최대 모멘트의 발생위치의 관계는 지반조건에 따라 선형적 관계인 것으로 평가되었다.

• 한국지반공학회논문집
• /
• 제24권6호
• /
• pp.57-67
• /
• 2008

철도노반의 다짐 후 품질을 관리하기 위하여 비반복 평판재하시험(nonrepetitive plate loading test)으로부터 얻어지는 지반반력계수(subgrade reaction modulus, $k_{30}$)와 반복평판재하시험(repetitive plate loading test)으로부터 획득하는 변형률계수(strain modulus, $E_v$)의 두 계수를 혼용하고 있다. 평판을 이용한 재하시험을 수행한다는 점에서 두 시험법은 동일하나, 설계정수 획득방법, 반복재하 횟수, 각 하중 단계에서의 시험 종료방법 등 시험방법에는 큰 차이가 있다. 본 논문에서는 두 시험의 차이를 비교 분석하고 두 계수에 대한 상관성을 평가하였다. 이를 위하여 경부고속철도 2단계 공사구간의 원지반 6개소와 쌓기지반 5개소에 대한 총 22회의 현장시험을 실시하였다. 현장 시험 시의 응력조건, 변형률 조건 및 포아송비 조건을 고려한 보정을 수행하여 두 계수의 상관성을 높였으며, 현장에서 사용이 가능하도록 지반종류에 따른 상관계수를 제시하였다.

• 한국농공학회지
• /
• 제38권4호
• /
• pp.89-98
• /
• 1996

This study was conducted to evaluate the relationships between the geotechnical properties and the CBR values of the subgrade materials used in the rural roal construction. A total of 77 Soil samples was investigated and tested from 45 agricultural and industrial sites in Kyungpook Province. The results obtained are as follows : 1. The maximum dry densities of the coarse grained soils are larger than those of the fine grained soils. The optimum moisture contents of the coarse grained soils are smaller than those of the fine grained scils. 2. The mean values of the medified CBR values of the soils classified by the USCS, are decreased in the order of GP-GM, SW-SM, GM, SC, SP-SM, ML, CL-ML. And, those classified by the AASHTO are decreased in the order of A-i-a, A-i-b, A-2-4, A-3, A-4, A-6, A-7-6. 3. As passing percentage of No.200 sieve is increased, the CBR Value of soils is decreased gradually. 4. As the optimum moisture contents of the soil is increased, the CBR values is decresed the maximum dry density of the soils increased, the CBR values increased. 5. The CBR values are decreased as Group-lndex(GI) are increased. And Activity(A) is showed no relation with the CBR values. 6. The relation ships between the modified CBR value and standand proctor compaction CBR value at 95% compaction ratio can he expressed as the following equation : Y(CERmod)= 2.3638 + 0.8922X(CBR25).

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 춘계 학술발표회
• /
• pp.1164-1171
• /
• 2010

Korea is considered to be a seasonal frozen soil area that is thawed in the spring, and most of the area is frozen in winter as to the characteristic of geography. In the current design codes for anti-freezing layer, the thickness of anti freezing layer is calculated by freezing depth against the temperature condition. Therefore, they have a tendency of over-design and uniform thickness without the considerations of thermal stability, bearing capacity and frost susceptibility of materials. So, it is essential for studying the appropriateness and bearing capacity besides the seasonal and mechanical properties of pavement materials to take a appropriate and reasonable design of the road structure. In this research, the evaluation of frost susceptibility on subgrade, ant-freezing layer, sub base was conducted by means of the mechanical property test and laboratory field road model downed scale experiment. The temperature, heaving amount, heaving pressure and unfrozen water contents of soil samples, the subgrade, anti-freezing layer, sub base soils of highway construction site, were measured to determine the frost susceptibility.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 추계학술대회 논문집
• /
• pp.1042-1049
• /
• 2007

Recently, a theoretically-sound design approach, using an elastic multilayer model, is attempted in trackbed designs for the construction of high speed railways and new lines of conventional railways. In the elastic multilayer model, the stress-dependent resilient modulus($E_R$) is an important input parameter, that is, reflects substructure performance under repeated traffic loading. However, the evaluation method for resilient modulus using repeated loading triaxial test is not fully developed for practical purpose, because of costly equipment and the significantly fluctuated values depending on the testing equipment and laboratory personnel. In this study, the paper will present an indirect method to estimate the resilient modulus using dynamic properties. The resilient modulus of crushed stone, which is the typical material of sub-ballast, was calculated with the measured dynamic properties and the range of stress level of the sub-ballast, and approximated with the power model combined with bulk and deviatoric stresses. The resilient modulus of coarse grained material decreases with increasing deviatoric stress at a confining pressure, and increases with increasing bulk stress. Sandy soil(SM classified from Unified Soil Classification System) of subgrade was also evaluated and best fitted with the power model of deviatoric stress only.

• Steel and Composite Structures
• /
• 제13권2호
• /
• pp.109-122
• /
• 2012

An efficient and accurate algorithm is proposed to evaluate the reliability of cable-stayed bridges accounting for soil-pile interaction. The proposed algorithm integrates the finite-element method and the response surface method. The finite-element method is used to model the cable-stayed bridge including soil-pile interaction. The reliability index is evaluated based on the response surface method. Uncertainties in the superstructure, the substructure and load parameters are incorporated in the proposed algorithm. A long span steel cable-stayed bridge with a main span length of 1088 m built in China is considered as an illustrative example. The reliability of the bridge is evaluated for the strength and serviceability performance functions. Results of the study show that when strength limit states for both girder and tower are considered, soil-pile interaction has significant effects on the reliability of steel cable-stayed bridges. Further, a detailed sensitivity study shows that the modulus of subgrade reaction is the most important soil-pile interaction-related parameter influencing the reliability of steel cable-stayed bridges.

• Structural Engineering and Mechanics
• /
• 제15권2호
• /
• pp.249-267
• /
• 2003

In this study, circular plates subjected to general type of loads and supported on a two-parameter elastic foundation are analysed. The stiffness, elastic bedding and soil shear effect matrices of a fully compatible ring sector plate element, developed by Saygun (1974), are obtained numerically assuming variable thickness of the element. Ring sector soil finite element is also defined to determine the deflection of the soil surface outside the domain of the plate in order to establish the interaction between the plate and the soil. According to Vallabhan and Das (1991) the elastic bedding (C) and shear parameters ($C_T$) of the foundation are expressed depending on the elastic constants ($E_s$, $V_s$) and the thickness of compressible soil layer ($H_s$) and they are calculated with a suitable iterative procedure. Using ring sector elements presented in this paper, permits the generalization of the loading and the boundary conditions of the soil outside the plate.

• 한국지반환경공학회 논문집
• /
• 제17권4호
• /
• pp.5-15
• /
• 2016

흙막이 현장에서 안정성 및 경제적 시공이 이루어지기 위해서는 굴착단계별 토질특성을 반영한 정량적인 정수들이 실제 현장과 일치되어야 한다. 그중 흙막이 설계 시 가장 중요한 매개 변수인 변형계수 및 수평지반반력계수는 현장여건에 따라 표준관입시험의 N값으로 산출하는 것이 일반화되어 있다. 따라서 본 연구에서는 기존의 일반화된 흙막이 설계법의 모순을 극복하고, 실제 현장에 부합하는 수평지반반력계수 산정을 위하여 표준관입시험, 평판재하시험 및 공내재하시험을 실시하고 상호관계성을 비교 분석하였다. 또한, 현장의 실제 계측데이터를 통한 유한요소해석법과 탄소성해석법의 역해석을 통하여 수평지반반력계수와 굴착에 따른 저감계수를 추정하였으며, 궁극적으로 중 소형 및 일반현장에서도 흙막이 벽체 설계 시 합리적인 설계적용을 위한 정수의 오류를 줄이고자 한다.

• Smart Structures and Systems
• /
• 제15권4호
• /
• pp.1085-1101
• /
• 2015

Changes in substructure conditions, such as ballast fouling and subgrade settlement may cause the railway quality deterioration, including the differential geometry of the rails. The objective of this study is to develop and apply a hybrid cone penetrometer (HCP) to characterize the railway substructure. The HCP consists of an outer rod and an inner mini cone, which can dynamically and statically penetrate the ballast and the subgrade, respectively. An accelerometer and four strain gauges are installed at the head of the outer rod and four strain gauges are attached at the tip of the inner mini cone. In the ballast, the outer rod provides a dynamic cone penetration index (DCPI) and the corrected DCPI (CDCPI) with the energy transferred into the rod head. Then, the inner mini cone is pushed to estimate the strength of the subgrade from the cone tip resistance. Laboratory application tests are performed on the specimen, which is prepared with gravel and sandy soil. In addition, the HCP is applied in the field and compared with the standard dynamic cone penetration test. The results from the laboratory and the field tests show that the cone tip resistance is inversely proportional to the CDCPI. Furthermore, in the subgrade, the HCP produces a high-resolution profile of the cone tip resistance and a profile of the CDCPI in the ballast. This study suggests that the dynamic and static penetration tests using the HCP may be useful for characterizing the railway substructure.