• Journal of Satellite, Information and Communications
• /
• 제8권3호
• /
• pp.10-14
• /
• 2013

In this paper, when applying current-mode circuit design technique showing constant power dissipation none the less operation frequency, to the low power design of dynamic voltage frequency scaling, we introduce the low power current-mode circuit design technique applying MOSFET in sub-threshold region, in order to solve the problem that has large power dissipation especially on the condition of low operating frequency. BSIM 3, was used as a MOSFET model in circuit simulation. From the simulation result, the power dissipation of the current memory circuit with sub-threshold MOSFET showed $18.98{\mu}W$, which means the consumption reduction effect of 98%, compared with $900{\mu}W$ in that with strong inversion. It is confirmed that the proposed circuit design technique will be available in DVFS using a current-mode circuit design.

• Asian Journal of Business Environment
• /
• 제11권1호
• /
• pp.17-25
• /
• 2021

Purpose: This study extends previous empirical work on the threshold effects of institutions on the relationship between infrastructure and economic growth. It does so by using three sub-indices of institutions as the threshold variable in place of aggregate index. This is with a view to determining the roles of the sub-indices in the nexus between infrastructure and economic growth. Research design, data and methodology: The analysis is based on a dynamic panel threshold regression model using a panel data set comprising 41 countries in Sub-Saharan Africa over the sample period of 1996-2015. Data are obtained from Ogbaro (2019). Results: The study finds that infrastructure exerts significant positive effects on economic growth below and above the threshold values of the three sub-indices, with higher effects above the threshold values. Results also show that on average, the Sub-Saharan African countries are not able to satisfy any of the threshold conditions, which accounts for their poor growth experience. Conclusion: The study concludes that countries with weak institutions do not benefit maximally from infrastructure development policies. The paper, therefore, recommends that countries in Sub-Saharan Africa need to focus on improving their institutional patterns if they are to reap the optimum benefits from their infrastructure development efforts.

• Journal of the Korean Society of Industry Convergence
• /
• 제25권2_1호
• /
• pp.141-148
• /
• 2022

In this paper, the evaluation equations proposed by Tange et al. and Ando et al. were used to evaluate the threshold stress intensity factor ∆K^R_th(s) and fatigue limit ∆𝜎^R_wc, according to the small crack of offshore structural steel F690. Despite the differences in concept and shape of the two equations, the ∆K^R_th(s) and ∆𝜎^R_wc proved completely consistent. It is possible to use these equations to evaluate the dependence of the crack length on the ∆K^R_th(s) and ∆𝜎^R_wc of structures made of all steel grades. With these equations, the characteristics of microcracks can be quantitatively evaluated, and the safety and reliability of the structure can be secured.

• The Journal of the Korea institute of electronic communication sciences
• /
• 제11권7호
• /
• pp.665-670
• /
• 2016

In this paper, we suggest the design of OP-AMP using MOSFET in the operation of sub-threshold condition as a basic unit of an IoT. The sub-threshold operation of MOSFET is useful for an ultra low power consumption of sensor network system in the IoT, because it cause the supply voltage to be reduced. From the simulation result using 0.35 um CMOS process, the supply voltage, VDD can be reduced with 0.6 V, open-loop gain of 43 dB and the power consumption was evaluated with about $1.3{\mu}W$ and the active size for an integration was measured with $64{\mu}m{\times}105{\mu}m$. It is expected that the proposed circuit is applied to the low power sensor network for IoT.

• The Journal of Industrial Distribution & Business
• /
• 제12권10호
• /
• pp.31-41
• /
• 2021

Purpose: This study estimates the threshold values of institutional quality through investigating the non-linear effect of six sub-indices of Worldwide Governance Indicators on FDI inflows in 34 developing countries in Asia and Eastern Europe over the period from 2000-2017. Research Design, data and methodology: GMM EGLS is employed which does not include the lagged value of the dependent variable as an independent variable. As a proxy for the institutional quality, either one of the six sub-indices of WGI from World Bank or the composite index obtained through a principal component analysis is used in a separate model. Results: An improvement in institutional quality, when the quality stays below a certain threshold level, does not increase FDI inflows, and only when the quality is above the threshold, it can positively influence FDI inflows. The threshold values of political stability and absence of violence, government effectiveness, and rule of law are relatively higher than those of the other dimensions of WGI. Conclusion: Institutional quality of the developing economies of Asia and Eastern Europe has a non-linear effect on FDI inflows. The target countries need to upgrade their institutional quality above the threshold in order to attract more FDIs.

• Journal of Ocean Engineering and Technology
• /
• 제35권5호
• /
• pp.327-335
• /
• 2021

Microcracks can rapidly grow and develop in high-strength steels used in offshore structures. It is important to render these microcracks harmless to ensure the safety and reliability of offshore structures. Here, the dependence of the aspect ratio (As) of the maximum depth of harmless crack (a_hlm) was evaluated under three different conditions considering the threshold stress intensity factor (Δk_th) and residual stress of offshore structural steel F690. The threshold stress intensity factor and fatigue limit of fatigue crack propagation, dependent on crack dimensions, were evaluated using Ando's equation, which considers the plastic behavior of fatigue and the stress ratio. a_hlm by peening was analyzed using the relationship between Δk_th obtained by Ando's equation and Δk_th obtained by the sum of applied stress and residual stress. The plate specimen had a width 2W = 12 mm and thickness t = 20 mm, and four value of As were considered: 1.0, 0.6, 0.3, and 0.1. The a_hlm was larger as the compressive residual stress distribution increased. Additionally, an increase in the values of As and Δk_th(l) led to a larger a_hlm. With a safety factor (N) of 2.0, the long-term safety and reliability of structures constructed using F690 can be secured with needle peening. It is necessary to apply a more sensitive non-destructive inspection technique as a non-destructive inspection method for crack detection could not be used to observe fatigue cracks that reduced the fatigue limit of smooth specimens by 50% in the three types of residual stresses considered. The usefulness of non-destructive inspection and non-damaging techniques was reviewed based on the relationship between a_hlm, a_NDI (minimum crack depth detectable in non-destructive inspection), a_{cr N} (crack depth that reduces the fatigue limit to 1/N), and As.

• Journal of IKEEE
• /
• 제24권1호
• /
• pp.161-169
• /
• 2020

In order to reduce the manufacturing cost of MCU chips used in applications such as wireless chargers and USB-C, compared to DP-EEPROM (Double Poly EEPROM), which requires 3 to 5 additional process masks, it is even more necessary MTP(Multi-Time Programmable), which is less than one additional mask and have smaller unit cell size. In addition, in order to improve endurance characteristics and data retention characteristics of the MTP memory cell due to E/P(Erase / Program) cycling, the distribution of the V_TP(Program Threshold Voltage) and the V_TE(Erase Threshold Voltage) needs to be narrow. In this paper, we proposed a current-type BL S/A(Bit-Line Sense Amplifier) circuit, WM(Write Mask) circuit, BLD(BL Driver) circuit and a algorithm, which can reduce the distribution of program and V_T and erase V_T, through compare the target current by performing the erase and program pulse of the short pulse several times, and if the current specification is satisfied, the program or erase operation is no longer performed. It was confirmed that the 256Kb MTP memory fabricated in the Magnachip semiconductor 0.13㎛ process operates well on the wafer in accordance with the operation mode.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• 제42권5호
• /
• pp.43-50
• /
• 2005

This paper describes some IC(integrated circuits) design and implementation techniques of low power multi-band Gm-C bandpass filter for body composition analyzer. Proposed BPF(bandpass filter) can be selected from three bands(20 KHz, 50 KHz, 100 KHz) by control signal. To minimize die area, a simple center frequency tuning scheme is used. And to reduce power consumption, operational transconductance amplifier operated in the sub-threshold region is adopted. The proposed BPF is implemented with 0.35 um 2-poly 3-metal standard CMOS technology Chip area is $626.42um\;{\times}\;475.8um$ and power consumption is 700 nW@100 KHz.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 한국해양정보통신학회 2002년도 춘계종합학술대회
• /
• pp.275-278
• /
• 2002

As the gate lengths of MOSFETs are scaled down to sub-50nm regime, there are key issues to be considered in the device design. In this paper, we have investigated the characteristics of threshold voltage for MOSFET device. We have simulated the MOSFETs with gate lengths from 100nm to 30nm using generalized scaling. Then, we have known the device scaling limits for nano structure MOSFET. We have determined the threshold voltages using LE(Linear Extraction) method.

• Computers and Concrete
• /
• 제26권3호
• /
• pp.203-211
• /
• 2020

Turkey is located in one of the most seismically active regions of in Europe. The majority of the population living in big cities are at high seismic risk due to insufficient structural resistance of the existing buildings. Such a seismic risk brings the need for a comprehensive seismic evaluation based on the risk analysis in Turkey. Determining the seismic resistance level of existing building stock against the earthquakes is the first step to reduce the damages in a possible earthquake. Recently in January 2020, the Elazig earthquake brought the importance of the issue again in the public. However, the excessive amount of building stock, labor, and resource problems made the implementation phase almost impossible and revealed the necessity to carry out alternative studies on this issue. This study aims for a detailed investigation of residential buildings in Antalya, Turkey. The approach proposed here can be considered an improved state of building survey methods previously identified in Turkey's Design Code. Antalya, Turkey's fifth most populous city, with a population over 2.5 Million, was investigated as divided into sub-regions to understand the vulnerability, and a threshold value found for the study area. In this study, 26,610 reinforced concrete buildings between 1 to 7 stories in Antalya were examined by using the rapid visual assessment method. A specific threshold value for the city of Antalya was determined with the second level examination and statistical methods carried out in the determined sub-region. With the micro zonation process, regions below the threshold value are defined as the priority areas that need to be examined in detail. The developed methodology can be easily calibrated for application in other cities and can be used to determine new threshold values for those cities.