• 공업화학
• /
• 제34권6호
• /
• pp.665-669
• /
• 2023

조제 메틸나프탈렌유(CMNO) 중에는 퀴놀린(QU), 이소퀴놀린(IQU)과 인돌(IN)과 같은 질소화합물(NCs)이 함유되어 있다. CMNO 중의 이들 NCs는 대기환경을 오염시키고 불쾌한 냄새로 인해 CMNO에 함유된 불순물로서 취급되고 있다. CMNO의 품질향상을 위해서, 본 연구는 원료로서 CMNO를, 용매로서 포름아미드 수용액을 각각 사용하여 CMNO 중에 함유된 NCs의 저감에 관한 추출 실험인자의 영향을 검토했다. 초기 원료에 대한 용매의 체적비(S/F)₀의 증가는 NCs의 분배계수와 2-메칠나프탈렌(2MNA)을 기준한 NCs의 선택도를 증가시켰다. 또한 조작 온도의 상승은 NCs의 분배계수를 증가시켰으나, 역으로 선택도를 감소시켰다. 일정한 조건(초기 용매에 함유된 물의 체적분율(y_w,0) = 0.1, (S/F)₀ = 9, T = 303 K, 액-액 접촉시간(t) = 72 h)하의 평형추출을 통해 회수된 추잔유 중의 QU, IQU와 IN의 조성은 CMNO에 비해 각각 약 58.5 wt%, 61.9 wt%와 73.4 wt% 저감되었다. 본 연구의 포름아미드 추출법은 CMNO에 함유된 NCs의 유효한 저감법으로 기대되었다.

• 한국수소및신에너지학회논문집
• /
• 제31권1호
• /
• pp.132-137
• /
• 2020

Lithium secondary batteries have become an important power source for portable electronic devices such as cellular phones, laptop computers. Presently, commercialized lithium-ion batteries use a LiCoO₂ cathode. However, due to the high cost and environmental problems resulting from cobalt, an intensive search for new electrode materials is being actively conducted. Recently, solid solution LiMn_1-xNi_xO₂ have become attractive because of high capacity and enhanced safety at high voltages over 4.5 V. The Li_1.6Ni_0.35Mn_0.65O₂ compounds were conventionally prepared by a sol-gel method, which can produce the layered Li-Ni-Mn-O compounds with a high homogeneity. And by adding a graphene 2wt% the first charge-discharge voltage profiles was increased over Li_1.6Ni_0.35Mn_0.65O₂ compound. Also, the variation s of the discharge capacities with cycling showed a higher capacity retention rater. In this study, material lifecycle evaluation was performed to analyze the environmental impact characteristics of Li_1.6Ni_0.35Mn_0.65O₂ & graphene 2wt% half-cell manufacturing process. The software of material life cycle assessment was Gabi. Through this, environmental impact assessment was performed for each process. The environmental loads induced by Li_1.6Ni_0.35Mn_0.65O₂ & graphene 2wt% synthesis process were quantified and analyzed, and the results showed that the amount of power had the greatest impact on the environment.

• The Plant Pathology Journal
• /
• 제40권2호
• /
• pp.218-224
• /
• 2024

Plants are treasure trove of novel compounds that have potential for antifungal chemicals and drugs. In our previous study, we had screened plant extracts obtained from more than eight hundred plant materials collected in Korea, and found that butanol fraction of the Actinostemma lobatum were most potent in suppressing growth of diverse fungal pathogens of plants. Here in this study, we describe further analysis of the butanol fraction, and summarize the results of subsequent antifungal activity test for the sub-fractions against a selected set of plant pathogenic fungi. This line of analyses allowed us to identify the sub-fractions that could account for a significant proportion of observed antifungal activity of initial butanol fraction from A. lobatum. Further analysis of these sub-fractions and determination of structure would provide the shortlist for novel compounds that can be a lead to new agrochemicals.

• 대한본초학회지
• /
• 제24권1호
• /
• pp.41-47
• /
• 2009

Objectives : The objective of this study was to examine the effects of P. oleracea into the HCl-ethanol induced gastritis in rats, and to isolate and determine the chemical compounds from P. oleracea. Methods : The rats were orally administered with crude extract or fractions or isolated compounds of P. oleracea 30 mins before the induction of gastric lesion by oral administration of HCl-ethanol. The gastric lesional area was measured using pixel counting software. Then the chemical compounds from P. oleracea was isolated and determined by LC-MS and NMR. Results : The inhibition effect of oral administration of crude extract of P. oleracea at a dose of 500 mg/kg in HCl-ethanol induced gastritis was similar to cimetidine. Then, aqueous fraction at a dose of 240 mg/kg exhibited the effects similar to cimetidine. Then, the aqueous fraction was further separated by MPLC and yielded four sub fractions. Among those sub fractions, agent II at a dose of 40 mg/kg possessed the strongest effect in the HCl-ethanol induced gastritis. The water fraction yielded-Uridine, Adenosine, Guanosine, which were characterized by Mass, 1H-NMR, 13C-NMR. Conclusions : This study suggest that a P. oleracea and its compounds showed potent efficacy on the development of HCl-ethanol induced gastritis. Thus, P. olaracea can be a potential natural resource for the management of gastritis although the mechanism of action involved in the treatment remains to be explored.

• 한국지반환경공학회 논문집
• /
• 제23권10호
• /
• pp.5-12
• /
• 2022

본 연구에서는 유기오염물질 유출수 처리를 위한 UV/H₂O₂ 산화 공정을 조사하였다. 유통량과 특성을 고려하여 벤젠, 톨루엔, 페놀, 메틸에틸케톤 4종의 대표 오염물질을 선정하였다. 선정된 물질은 전처리를 고려하여 자연휘발과 가압부상조를 모사한 폭기 실험으로 제거되었다. 이후 다양한 과산화수소 농도 조건에서 UV/H₂O₂ 산화 실험을 수행하였다. 벤젠, 톨루엔은 높은 휘발성으로 인해 산화 공정에 도달하기 전에 대부분 휘발되었다. 벤젠과 톨루엔의 휘발을 고려하여 5mg/L의 초기농도에서 산화 실험을 수행하였다. 벤젠과 톨루엔은 모든 과산화수소 농도 조건에서 20분 후 100%의 제거를 달성하였다. 페놀은 휘발 실험에서 거의 제거되지 않았으며, 50mg/L의 초기농도로 산화 실험을 수행한 결과 0.12v/v%의 과산화수소 투입 조건에서 30분 후 100%의 제거를 나타냈다. 메틸에틸케톤은 휘발성 실험 결과 2시간 후 58%가 제거되었다. 메틸에틸케톤 초기농도 50mg/L의 UV/H₂O₂ 산화 실험에서 0.08v/v%의 과산화수소 조건에서 99.7%의 메틸에틸케톤이 제거되었다. 선정된 4종의 물질에 대하여 UV/H₂O₂ 공정이 높은 분해 효율을 보이는 것을 확인하였으며, 물질 별 과산화수소 투입량을 파악하였다.

• 한국재료학회지
• /
• 제23권3호
• /
• pp.183-189
• /
• 2013

$Cu_2ZnSn(S,Se)_4$ material is receiving an increased amount of attention for solar cell applications as an absorber layer because it consists of inexpensive and abundant materials (Zn and Sn) instead of the expensive and rare materials (In and Ga) in $Cu(In,Ga)Se_2$ solar cells. We were able to achieve a cell conversion efficiency to 4.7% by the selenization of a stacked metal precursor with the Cu/(Zn + Sn)/Mo/glass structure. However, the selenization of the metal precursor results in large voids at the absorber/Mo interface because metals diffuse out through the top CZTSe layer. To avoid the voids at the absorber/Mo interface, binary selenide compounds of ZnSe and $SnSe_2$ were employed as a precursor instead of Zn and Sn metals. It was found that the precursor with Cu/$SnSe_2$/ZnSe stack provided a uniform film with larger grains compared to that with $Cu_2Se/SnSe_2$/ZnSe stack. Also, voids were not observed at the $Cu_2ZnSnSe_4$/Mo interface. A severe loss of Sn was observed after a high-temperature annealing process, suggesting that selenization in this case should be performed in a closed system with a uniform temperature in a $SnSe_2$ environment. However, in the experiments, Cu top-layer stack had more of an effect on reducing Sn loss compared to $Cu_2Se$ top-layer stack.

• Elastomers and Composites
• /
• 제58권4호
• /
• pp.179-190
• /
• 2023

The effect of the particle size and silica structure on the wear behavior of Silica/Styrene-Butadiene Rubber (SBR) compounds was investigated using a blade-type abrader and the findings were compared with those obtained with an Akron abrader. The compensated characteristic parameter (Ψ_c), which was the contributory factor of the combined effect of the particle size and filler structure, was introduced. This parameter was found to exhibit a linear relationship with the Young's modulus. The Young's modulus correlated more with Ψ_c than the uncompensated characteristic parameter (Ψ) modeled for carbon black. The wear rate and volume loss measured using a blade-type abrader and Akron abrader were respectively observed to be inversely proportional to Ψ_c, that is, the wear resistance of Silica/SBR compound improved as the particle size became smaller and the silica structure became intricate. The coefficient of determination (R²) obtained from the linear relationship between Ψ_c and wear rate was higher than those between Ψ_c and volume loss for the Silica/SBR compound. Thus, the blade-type abrader exhibited high potential to be used for accurately evaluating the effect of particle size and structural properties of silica on the wear behavior of SBR compounds.

• 대한화학회지
• /
• 제49권2호
• /
• pp.155-160
• /
• 2005

• 청정기술
• /
• 제29권2호
• /
• pp.118-125
• /
• 2023

부지가 폴리염화비페닐(polychlorinated biphenyls, PCBs)로 오염되면, 심각한 환경 및 건강 위해를 피할 수 없게 된다. 따라서 혁신적이지만 경제성을 지니는 제자리 복원 기술이 오염 부지에 즉시 적용되어야 한다. TCE, PCE 및 DDT와 같은 염소계 유기화합물의 탈염소화를 위하여 최근에는 나노 규모의 영가-철(zero-valent iron, ZVI)이 성공적으로 적용되었고, 지구 지각에서도 풍부하게 존재하는 철은 환경적으로 안전한 것으로 통상적으로 간주된다. 입상 ZVI에 비해 나노 규모 ZVI의 반응성은 훨씬 높지만, 높은 표면에너지와 자기적 물성 때문에 나노 규모 ZVI 입자들은 서로 응결된다. 서로 응결되어 큰 입자로 전환되는 것을 방지하기 위해 먼저 생성된 나노 ZVI 입자들을 가능한 고정화하기 위한 방안으로 TiO₂ 분말에 나노 ZVI를 담지하였다. FeSO₄와 TiO₂ 분말의 수용액상 슬러리에 NaBH₄를 천천히 첨가하여10wt% ZVI/TiO₂를 제조하였다. 입자 크기의 불균일성에도 불구하고, 나노 ZVI 입자들이 TiO₂ 외부 표면에 성공적으로 분산되었다. 제조된 ZVI/TiO₂는 PCBs의 표준 물질 일종인 Aroclor 1242로 인위적으로 오염시킨 토양의 PCBs 분해 실험에 적용되었고, Aroclor 1242 분해 성능을 관찰하였다. 제조된 ZVI/TiO₂는 Aroclor 1242 분해에 꽤 높은 반응성을 보였지만, 분자량이 큰 탄화수소로 판단되는 화합물이 부산물로 생성되어 토양에 잔류하는 것은 피할 수 없었다.

• Bulletin of the Korean Chemical Society
• /
• 제34권10호
• /
• pp.2947-2952
• /
• 2013

Three coordination polymers, [$ML_2(H_2O)_2$] (M = Co (1), Ni (2), Mn (3)), were prepared from metal acetates ($M(CH_3COO)_2{\cdot}4H_2O$) and 3-pyridinepropionic acid ($HL=(3-py)-CH_2CH_2COOH$) by solvent-layer methods. By contrast, a discrete molecular compound, trans-[$Pd(HL)_2Cl_2$] (4), was synthesized by replacing benzonitrile (PhCN) ligands in trans-[$Pd(PhCN)_2Cl_2$] with HL under microwave-heating conditions. Compounds 1-3 have a 2D framework, and compound 4 contains a square-planar Pd metal.