• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.47 no.4
• /
• pp.20-27
• /
• 2010

This paper proposes a saturation compensating method by embedding pseudo-random code information in wavelet packet based colorization algorithm. In the color-to-gray process, an input RGB image is converted into YCbCr images, and a 2-level wavelet packet transform is applied to the Y image. And then, color components of CbCr are embedded into two sub-bands including minimum amount of energy on the Y image. At this time, in order to compensate the color saturations of the recovered color image during the printing and scanning process, the maximum and minimum values of CbCr components of an original image are also embedded into the diagonal-diagonal sub-band by a form of pseudo-random code. This pseudo-random code has the maximum and minimum values of an original CbCr components, and is expressed by the number of white pixels. In the gray-to-color process, saturations of the recovered color image are compensated using the ratio of the original CbCr values to the extracted CbCr values. Through the experiments, we can confirm that the proposed method improves color saturations in the recovered color images by the comparison of color difference and PSNR values.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.24 no.4
• /
• pp.374-383
• /
• 2013

This paper presents a design for improvement of isolation characteristics by the inserted stub structure on ground plane of a handy terminal which is composed of a main antenna and a sub antenna covered LTE bandwidth. In order to compensate for a resonance length of proposed antenna and to realize a high isolation characteristic, a pair of stub was inserted and located on ground plane that currents from two antennas were converged. A simulated isolation characteristic of antenna without stub at the LTE class 13 band was about -5 dB, but its characteristics of proposed antenna with two stubs at uplink(777~787 MHz) and downlink(746~756 MHz) of the LTE class 13 band were about -12 dB and -15 dB, respectively. An average gain of a fabricated antenna with two stubs was observed about -2 dBi above and it showed good results with comparison of business condition that the average gain of commercial handy terminal has to appear -4 dBi above. The measured S-parameter characteristics and radiation patterns showed a reasonable agreement with the simulation results.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.34 no.1
• /
• pp.8-15
• /
• 2024

The CaF₂ single crystal has notable characteristics such as a large band gap (12 eV), excellent transparency over a wide wavelength range, low refractive index and dispersion. Due to these outstanding properties, CaF₂ single crystal has considered as a promising material for short-wavelength light sources in recent lithography processes. However, there is an inherent birefringence of the material at 157 nm and the resulting aberration can be compensated for through the combination of the (100) plane and the (111) plane. Therefore, it is necessary to investigate the characteristics according to the plane. In this study, we analyzed crystallinity, optical properties of commercial CaF₂ single crystal wafers grown by the Czochralski method. In particular, through chemical etching under various conditions, it was confirmed that the shape of etch pits appears differently depending on the plane and the shape and array of specific etch pits affected by dislocations and defects were examined.

• Journal of IKEEE
• /
• v.23 no.3
• /
• pp.800-804
• /
• 2019

This paper presents a dual-loop sub-sampling digital PLL for a 2.4 GHz IoT applications. The PLL initially performs a divider-based coarse lock and switches to a divider-less fine sub-sampling lock. It achieves a low in-band phase noise performance by enabling the use of a high resolution time-to-digital converter (TDC) and a digital-to-time converter (DTC) in a selected timing range. To remove the difference between the phase offsets of the coarse and fine loops, a phase offset calibration scheme is proposed. The phase offset of the fine loop is estimated during the coarse lock and reflected in the coarse lock process, resulting in a smooth transition to the fine lock with a stable fast settling. The proposed digital PLL is designed by SystemVerilog modeling and Verilog-HDL and fully verified with simulations.

• The Journal of the Acoustical Society of Korea
• /
• v.29 no.1
• /
• pp.69-75
• /
• 2010

In this paper, the pitch is detected after the elimination of formant ingredients by flattening the spectrum in frequency domain. In order to remove impact of formant and transition frequency in the signal spectrum, formant envelop is made by linear interpolation with any points each sub-band and the spectrum of speech signal is compensated by the reverse of the envelop interpolated linearly after we divide frequency band into several segment based on LSP and detect the points. The experimental result showed the proposed method appeared an outstanding performance in compared with LPC, Cepstrum, Lifter methods. The method reduced the gross error rate 1.30% than the LPC method which appeared a good performance except the proposed method. Also, the proposed method showed low error rate in noise environment.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.4
• /
• pp.596-601
• /
• 2020

Silicon carbide is considered a potentially useful material for high-temperature electronic devices because of its large band gap energy and p-type or n-type conduction that can be controlled by impurity doping. Accordingly, the thermoelectric properties of -SiC powder prepared by refined diatomite were investigated for high value-added applications of natural diatomite. -SiC powder was synthesized by a carbothermal reduction of the SiO₂ in refined diatomite using carbon black. An acid-treatment process was then performed to eliminate the remaining impurities (Fe, Ca, etc.). n-Type semiconductors were fabricated by sintering the pressed powder at 2000℃ for 1~5h in an N2 atmosphere. The electrical conductivity increased with increasing sintering time, which might be due to an increase in carrier concentration and improvement in grain-to-grain connectivity. The carrier compensation effect caused by the remaining acceptor impurities (Al, etc.) in the obtained -SiC had a deleterious influence on the electrical conductivity. The absolute value of the Seebeck coefficient increased with increasing sintering time, which might be due to a decrease in the stacking fault density accompanied by grain or crystallite growth. On the other hand, the power factor, which reflects the thermoelectric conversion efficiency of the present work, was slightly lower than that of the porous SiC semiconductors fabricated by conventional high-purity -SiC powder, it can be stated that the thermoelectric properties could be improved further by precise control of an acid-treatment process.

• Journal of the Korean Magnetics Society
• /
• v.26 no.6
• /
• pp.185-189
• /
• 2016

By employing photoemission spectroscopy (PES) and soft X-ray absorption spectroscopy (XAS), the electronic structure of the candidate half-metallic antiferromagnet of $Mn_3Ga$ Heusler compound has been investigated. We have studied two ball-milled $Mn_3Ga$ powder samples, one after annealing and the other without annealing, respectively. Based on the Mn 2p XAS study, we have found that Mn ions are nearly divalent in $Mn_3Ga$ and that the Mn ions having the locally octahedral symmetry and those having the locally tetrahedral symmetry are both present in $Mn_3Ga$. We have found relatively good agreement between the measured valence-band PES spectrum of $Mn_3Ga$ and the calculated density of states, which is in agreement with the half-metallic electronic structure of $Mn_3Ga$.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.10 s.113
• /
• pp.1000-1006
• /
• 2006

In this paper, the gain of the square hem antenna is enhanced with $3{\times}3$ latticed aperture. In order to get the uniform field distribution on the aperture, the different thicknesses of dielectric plates for the phase compensation are inserted into the center and the edge of the aperture respectively. The proposed horn antenna is designed at 12.5 GHz band, and then the analysis of the field distribution on the aperture is performed by using FDTD method. The radiation pattern is also calculated from the analysis. Based on the measured data, it is verified that the gain of a horn antenna with latticed aperture is 18 dBi and this is 2 dB gain enhancement compare with a normal horn antenna without latticed aperture.