• Geomechanics and Engineering
• /
• v.20 no.5
• /
• pp.385-397
• /
• 2020

This paper presents an application of artificial neural networks (ANNs) in settlement prediction of a foundation on sandy soil. In order to train the ANN model, a wide experimental database about settlement of foundations acquired from available literatures was collected. The data used in the ANNs model were arranged using the following five-input parameters that covered both geometrical foundation and sandy soil properties: breadth of foundation B, length to width L/B, embedment ratio D_f/B, foundation net applied pressure q_net, and average SPT blow count N. The backpropagation algorithm was implemented to develop an explicit predicting formulation. The settlement results are compared with the results of previous studies. The accuracy of the proposed formula proves that the ANNs method has a huge potential for predicting the settlement of foundations on sandy soils.

• Journal of Biosystems Engineering
• /
• v.28 no.4
• /
• pp.335-342
• /
• 2003

A simple disposable thick-film potentiometric strip has been developed and evaluated for hydroponics application. The strip consisted of low ion-selective electrodes (ISE) fabricated by screen-printing technology. The electrochemical responses of ion sensors for nitrate, ammonium, potassium, and magnesium were measured with specially designed 16-channel low voltage signal transducers. The analytical characteristics of the sensors were comparable with those of conventional ISE sensors. The thick-film sensors exhibit linear relationships over five concentration decades. The concentration of N $O_3$ - ion in standard solution can be determined by direct potentiometric measurements without any conditioning before measurements. However, measurement of $K^{+}$, N $H_4$$^{+}$, and $Mg^{2+}$ ionic concentrations in nutrient solutions seems not feasible.

• Journal of Surface Science and Engineering
• /
• v.55 no.5
• /
• pp.292-298
• /
• 2022

In this study, PEO (plasma electrolytic oxidation) film formation behavior of AZ31 Mg alloy under application of 300 Hz pulse current was studied by the analyses of V-t curve, arc generation behavior, PEO film thickness and morphology of PEO films with treatment time in 0.05 M NaOH + 0.05 M Na₂SiO₃ + 0.1 M NaF solution. PEO films was observed to grow after 10 s of application of pulse current together with generation of micro-arcs. PEO film grew linearly with treatment time at a growth rate of about 5.58 ㎛/min at 200 mA/cm² of pulse current but increasing rate of film formation voltage became lowered largely with increasing treatment time after passing about 250 V, suggesting that resistivity of PEO films during micro-arc generation decreases with increasing film formation voltage at more than 250 V.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.6 no.1
• /
• pp.73-80
• /
• 2004

This study was conducted to determine the effect of several kinds of calcium foliar application and drip irrigation on the bitter pit incidence of apple. CaCl₂, inorganic calcium compound, was the most effective in increasing the calcium concentration in the fruit flesh, and reducing bitter pit incidence. Calcium spray in the later part of the growing season was more effective than in the earlier part. Drip irrigation applied during the dry spells increased calcium concentration in the fruit flesh, and reduced bitter pit incidence.

• Communications of the Korean Mathematical Society
• /
• v.39 no.3
• /
• pp.803-819
• /
• 2024

In our study, the integration of fuzzy graphs into classical graph theory gives rise to a novel concept known as "Fuzzy Super Subdivision." Let SS_f (G) be the fuzzy super subdivision graphs, by substituting a complete bipartite graph k_(2,m) (m = 1, 2, . . .) for each edge of a fuzzy graph. The attributes and properties of this newly proposed concept are briefly outlined, in addition to illustrative examples. Furthermore, significant findings are discussed on connectivity, size, degree and order of fuzzy super subdivision structures. To illustrate the practical implications of our approach, we present an application focused on analyzing the growth of infections in blood or urine samples using the Fuzzy Super Subdivision model.

• Applied Microscopy
• /
• v.51
• /
• pp.19.1-19.7
• /
• 2021

The main purpose of this paper is the preparation of transmission electron microscopy (TEM) samples from the microsized powders of lithium-ion secondary batteries. To avoid artefacts during TEM sample preparation, the use of ion slicer milling for thinning and maintaining the intrinsic structure is described. Argon-ion milling techniques have been widely examined to make optimal specimens, thereby making TEM analysis more reliable. In the past few years, the correction of spherical aberration (Cs) in scanning transmission electron microscopy (STEM) has been developing rapidly, which results in direct observation at an atomic level resolution not only at a high acceleration voltage but also at a deaccelerated voltage. In particular, low-kV application has markedly increased, which requires a sufficiently transparent specimen without structural distortion during the sample preparation process. In this study, sample preparation for high-resolution STEM observation is accomplished, and investigations on the crystal integrity are carried out by Cs-corrected STEM.

• Ceramist
• /
• v.23 no.1
• /
• pp.101-109
• /
• 2020

In this study, the phase transition behaviors of lead-free (Na_1/2Bi_1/2TiO₃)_(1-x)-(BaTiO₃)_x (NBT-BT) are investigated by using Brillouin spectroscopy. The elastic properties, sound velocity and absorption coefficient of NBT-BT are characterized as a function of temperature along different crystallographic axes. The temperature dependences of the elastic constants of NBT-BT near the morphotropic phase boundary are determined for the first time. The unpoled NBT-BT single crystals exhibits the typical relaxor behaviors, presenting broad acoustic and dielectric anomalies. The application of electric field induced discontinuous changes in the elastic properties at ~110℃, which indicates field-induced phase transition occurred. The electric field also changes the dielectric constant from more relaxor-like to ferroelectric-like dielectric behavior.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.16 no.8
• /
• pp.676-680
• /
• 2003

In this study, to develop the low temperature sintering ceramics for piezoelectric transformer, PSN-PNN-PZT system ceramics were manufactured as a function of V$_2$O$_{5}$ addition, that is the low melting point oxide. Its dielectric and piezoelectric characteristics were investigated. With increasing the amount of V$_2$O$_{5}$ addition, electromechanical coupling factor(kp) and mechanical quality factor(Qm) were decreased. For piezoelectric transformer application, the 0.1wt% V$_2$O$_{5}$ added specimen sintered at 1,00$0^{\circ}C$ showed the proper value of $\varepsilon$r=1,590, kp=0.51 and Qm=748.m=748.

• Journal of the Korean Ceramic Society
• /
• v.44 no.7
• /
• pp.387-392
• /
• 2007

Thermal conductivities in $La_2Ce_2O_7-Gd_2Ce_2O_7-Y_2Ce_2O_7$ ternary system have been investigated. Pyrochlore phases formed at all ternary compositions and their sinterbilities were decreased with La addition. Thermal conductivities showed a minimum value at $La_2Ce_2O_7$ with moderate increases as $Y^{3+}$ and $Gd^{3+}$ ions replaced $La^{3+}$. Thermal expansion anomaly observed in $La_2Ce_2O_7$, which might be detrimental to TBC application, were suppressed by $Y^{3+}$ and $Gd^{3+}$ additions, with resultant thermal conductivities, $1.3{\sim}1.5 W/mK$ at $1000^{\circ}C$.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.24 no.4
• /
• pp.285-294
• /
• 2022

In order to accurately calculate greenhouse gas emissions in the agricultural field, Korea has been developing national-specific emission factors through direct measurement of gas fluxes using the closed-chamber method. In the rice paddy, only national-specific emission factors for methane (CH₄) have been developed. It is thus necessary to develop those for nitrous oxide (N₂O) affected by the application of nitrogen fertilizer. However, since the concentration of N₂O emission from rice cultivation is very low, the QA/QC methods such as method detection and practical quantification limits are important. In this study, N₂O emission from a rice paddy was evaluated affected by the amount of nitrogen fertilizer, by taking into account both method detection and practical quantification limits for N₂O concentration. The N₂O emission from a rice paddy soils affected by the nitrogen fertilizer application was estimated in the following order. The method detection limit (MDL) of N₂O concentration was calculated at 95% confidence level based on the pooled standard deviation of concentration data sets using a standard gas with 98 nmol mol^-1 N₂O 10 times for 3 days. The practical quantification limit (PQL) of the N₂O concentration is estimated by multiplying 10 to the pooled standard deviation. For the N₂O flux data measured during the rice cultivation period in 2021, the MDL and PQL of N₂O concentration were 18 nmol mol^-1 and 87 nmol mol^-1, respectively. The measured values above the PQL were merely about 12% of the total data. The cumulative N₂O emission estimated based on the MDL and PQL was higher than the cumulative emission without nitrogen fertilizer application. This research would contribute to improving the reliability in quantification of the N₂O flux data for accurate estimates of greenhouse gas emissions and uncertainties.